Panasonic ET-DLE060 User manual

ENGLISH

Commercial Use

Model No. ET-DLE060

DPQX1249ZA/X1

Zoom Lens 　　　　　　　　　

Operating Instructions

Thank you for purchasing this Panasonic product.

■To ensure correct use of this lens, please read the operating instructions supplied

with the lens and the projector carefully.

■Before using this product, be sure to read “Read this rst!” (Page 3).

■Please save this manual for future use.

2-ENGLISH

Read this rst! ......................................................................................3

Before Use.............................................................................................4

Attaching the Lens / Detaching the Lens...........................................4

Before replacing the projection lens........................................................ 4

Attaching the Lens................................................................................... 5

Detaching the Lens ................................................................................. 6

Focus Adjustment.................................................................................... 7

Projection relationships.......................................................................8

Lens shift ranges................................................................................10

Specications .....................................................................................12

Dimensions .........................................................................................12

Projected image size and Projection distance.......Appendix / Annexe / 付録 1

The "Appendix" can be found after the Japanese language section ( 日本語 ).

█ Contents

ENGLISH-3

Read this rst! Always follow these precautions

WARNING:

Do not look at or place your skin into the light emitted from the lens while the

projector is being used.

Doing so can cause burns or loss of sight.

zStrong light is emitted from the projector’s lens. Do not look at or place your hands

directly into this light.

zTurn off the power when moving away from the projection lens or projector.

Do not project an image with the lens cover attached.

zDoing so can cause re.

CAUTION:

Before replacing the projection lens, be sure to turn off the power and

disconnect the power plug from the wall outlet.

zUnexpected projection of light may cause injury to eyes.

zReplacing the projection lens without removing the power plug may result in electric

shock.

Do not stand in front of the lens while the projector is being used.

Doing so can cause damage and burns to clothing.

zStrong light is emitted from the projector’s lens.

Do not place objects in front of the lens while the projector is being used.

Doing so can cause re, damage to the object, or malfunction of the lens and

projector.

zStrong light is emitted from the projector’s lens.

Do not open the desiccant bag. Do not eat the contents.

Inadvertently ingesting desiccant could be harmful.

zIf the desiccant gets into your eyes or mouth, immediately rinse with plenty of water

and seek medical attention.

zKeep desiccant out of the reach of children.

4-ENGLISH

■Supported projectors

PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 /

PT-DZ870 / PT-DW830 / PT-DX100 / PT-DZ780 / PT-DW750 / PT-DX820

Note

zThis manual omits the alphabets at the end of projector model numbers.

zModels other than the above may also be supported. Refer to the operating instructions of

the projector you are using.

■Supplied Accessories

Make sure that the following has been provided.

Part name Appearance

Lens cover

1 each

(The product is

delivered with a lens

cover attached.)

Before replacing the projection lens

Return the projection lens to the home position before replacing or removing it.

For details on how to return the lens to the home position, refer to the operating

instructions of the projector.

Attention

zMake sure that the projector power supply is switched off before attaching or detaching the

projection lens.

zAfter removing the projection lens, store it safely away from vibration or impacts.

zDo not touch the electric contact points of the projection lens with your ngers. Dust and

dirt on the contacts may cause contact malfunctions, while static electricity may damage

the unit.

zDo not touch the surface of the lens with bare hands. Finger prints and dirt on the surface

of the lens will be magnied by the lens and lower the quality of the projected image. Place

the supplied lens cover on the zoom lens when the projector is not in use.

zThe lens is made of glass. The lens could be damaged if brought into contact with or

rubbed against hard objects. Handle the lens carefully.

zUse a clean, soft and dry cloth to wipe away dust and dirt from the projection lens.

Do not use uffy cloths containing oil, water or dust for cleaning. The lens is easily

damaged, so do not apply excessive pressure when wiping it.

Attaching the Lens / Detaching the Lens

Before Use

ENGLISH-5

Attaching the Lens

Attention

zBefore attaching the Projection Lens, remove the lens hole cover (only lens options

models) and the two lens covers attached to the Projection Lens.

Attaching the Lens / Detaching the Lens (continued)

The illustrations in this procedure depict

use of the PT-RZ970 series as an example.

1) (i) Turn the lens mount cover

counterclockwise, and (ii)

remove it.

Lens Mount Cover

(ii)(ii)

(i)

2) Pass the rear of the zoom lens

through the lens mount cover

until the lens mount cover is

at about the front of the zoom

lens.

3) (i) Align the positioning guide

on the zoom lens with the

guide groove on the projector,

and insert the zoom lens all

the way into the projector.

4) (ii) Turn the zoom lens

clockwise until it clicks into

place.

zTurn the zoom lens

counterclockwise, and check that it

is locked into place.

(i)(i)(i)(i)

Guide groove

Lens release button

Positioning guide

6-ENGLISH

Attaching the Lens / Detaching the Lens (continued)

5) (i) Insert the tab on the lens

mount cover through the

slot on the projector, and (ii)

turn clockwise to secure lens

mount cover.

(i)(i)

Lens cover tab

Slot position

The illustrations in this procedure depict

use of the PT-RZ970 series as an example.

1) (i) Turn the lens mount cover

counterclockwise, and (ii)

remove it.

2) Press the lens release button.

zA click will be heard.

3) (i) Turn the zoom lens

counterclockwise, and (ii)

remove it.

(i)(i)

Lens release button

(i)(i)

Attention

zAfter attaching the projection lens, turn on the projector and perform lens calibration.

Detaching the Lens

ENGLISH-7

Focus Adjustment

The focus balance of the center of the projected image and that of the peripheral areas

differs depending on the size of the image.

This lens is equipped with a function for adjusting the peripheral focus balance.

■Adjusting the focus

Attaching the Lens / Detaching the Lens (continued)

The illustrations in this procedure depict

use of the PT-RZ970 series as an

example.

1) Operate the projector to align

the focus of the center of the

image.

2) Manually turn the peripheral

focus adjustment ring as

shown on the left, and align

the focus of the peripheral

areas of the image.

Peripheral focus adjustment ring

Attention

zThe projected image sizes and their indicators shown on the peripheral focus adjustment

ring are approximate guides.

8-ENGLISH

Projection relationships

The dimensional relationship between the screen and the projector is shown below.

■Dimensional relationship diagram

L (LW/LT)

SW SH

Projected image

Screen

Note

zThis diagram assumes that the size and position of the projected image will be adjusted so

that the image lls the entire screen.

zThis illustration is not drawn to scale.

L Projection distance

LW Minimum distance

LT Maximum distance

L1 Lens protrusion dimension

SH Image height

H Distance from the lens center to the lower edge of the projected image

SW Image width

SD Projected image size

(Unit: m)

Projector model

Dimension for L1

(approximate

value)

PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ770 / PT-RW730 /

PT-RZ660 / PT-RW620 / PT-DZ870 / PT-DW830 / PT-DX100

0.104

PT-DZ780 / PT-DW750 / PT-DX820 0.084

Note

zThe illustrations of projectors in this manual are for informational purposes only and do not

represent a specic projector model. Congurations may vary with the model.

zSome of the alphabet letters at the end of projector model numbers may be omitted in this

manual.

ENGLISH-9

Projection relationships (continued)

Attention

zTo prevent obstruction of the intake and exhaust vents, install the projector with a

clearance at least 500 mm (1 ft. 7 in.) from walls and objects.

If you are installing the projector in a sealed space, be sure to provide additional air

conditioning equipment and ventilation equipment. Insufcient ventilation will result in an

accumulation of heat and may activate the projector's protection circuit.

zAvoid setting up in places which are subject to sudden temperature changes, such as near

an air conditioner or lighting equipment (studio lamps, etc.).

■Dimensional relationship

For details on the projection distance (L), refer to “Projected image size and Projection

distance” and “Projection distance formulas” in the Appendix.

Note

zFor details on “Projected image size and Projection distance” for projector models other

than the following, refer to “Setting up” in the operating instructions of the projector.

zSome of the alphabet letters at the end of projector model numbers may be omitted in this

manual.

PT-RZ970 / PT-RW930 / PT-RX110 / PT-RZ770 / PT-RW730 / PT-RZ660 / PT-RW620 /

PT-DZ870 / PT-DW830 / PT-DX100 / PT-DZ780 / PT-DW750 / PT-DX820

10-ENGLISH

If you perform lens calibration after attaching the projection lens, the projection lens

moves to the home position after calibration is complete.

Using the position of the projected image at the home position (i.e., the standard projection

position) as a basis, you can use the lens shift adjustment function on the projector to

adjust the position of the projected image within the respective lens shift ranges.

Perform lens shift adjustment within the ranges shown in the following illustrations.

Moving the lens outside of the adjustment ranges may alter the focus. This occurs due

to limitations in lens movement that are intended to protect the optical components.

The following illustrations depict lens shift ranges for oor installations of the projector.

PT-RZ970 / PT-RZ770 / PT-RZ660 /

PT-DZ780

0.10H

0.19H

0.40V0.16V

Standard projection position

Projected image height V

Projected image width H

PT-RW930 / PT-RW730 / PT-RW620 /

PT-DW750

0.10H

0.49V0.16V

0.23H

Projected image width H

Standard projection position

Projected image height V

PT-RX110 / PT-DX820

Projected image width H

0.19H

0.10H

0.30V0.13V

Standard projection position

Projected image height V

Lens shift ranges

Other manuals for ET-DLE060

Table of contents

Other Panasonic Camera Lens manuals

Panasonic

Panasonic AW-S14 X BRM User manual

Panasonic

Panasonic WV-LZ12A User manual

Panasonic

Panasonic Lumix S-E2470 User manual

Panasonic

Panasonic Lumix H-H020A User manual

Panasonic

Panasonic WV-LF9C3 User manual

Panasonic

Panasonic Lumix DMC-G1KPP User manual

Panasonic

Panasonic H-HS030 User manual

Panasonic

Panasonic S-S50 Installation guide

Panasonic

Panasonic WV-LZ14 User manual

Panasonic

Panasonic LUMIX S 85 mm F1.8 User manual

Panasonic

Panasonic H-PS45175 User manual

Panasonic

Panasonic Lumix H-HS35100 User manual

Panasonic

Panasonic AW-LZ17MD9 User manual

Panasonic

Panasonic Lumix H-FSA14140 User manual

Panasonic

Panasonic H-PS45175PP User manual

Panasonic

Panasonic 5025232847358 User manual

Panasonic

Panasonic H-FS12032 User manual

Panasonic

Panasonic Lumix H-XA025 User manual

Panasonic

Panasonic H-X012 User manual

Panasonic

Panasonic Lumix S-E2470 Installation guide

Panasonic

Panasonic WV-LM6B2 User manual

Panasonic

Panasonic Lumix H-X015 User manual

Panasonic

Panasonic H-FS35100 User manual

Panasonic

Panasonic Lumix S Pro S-R1635 User manual

Popular Camera Lens manuals by other brands

THORLABS

THORLABS ELL15 user guide

FUJICA

FUJICA ZC1000 owner's manual

Tamron

Tamron A09 Information sheet

Sony

Sony SEL-55210 operating instructions

Sony

Sony VCL-HG2037 operating instructions

Honeywell

Honeywell HLM25V6F12 manual

Sony

Sony VCL-ST30 operating instructions

Canon

Canon FD 35 - 70 mm instructions

Sony

Sony SAL-85F14Z - 85mm f1.4 Carl Zeiss Planar T Coated Telephoto... operating instructions

ARRI

ARRI Lenses brochure

Nikon

Nikon AF-S VR 24-120 f/3.5-5.6G IF-ED instruction manual

Rokinon

Rokinon DS50M-C instruction manual

Olympus

Olympus M.Zuiko Digital ES 300mm f4.0 IS PRO instructions

Sony

Sony VCL-DE07T operating instructions

Canon

Canon FD Lens Guide book

Tamron

Tamron A036 owner's manual

Samsung

Samsung 20-50mm F3.5-5.6 ED II user manual

Tamron

Tamron 272E user manual