Panasonic TY-ER3D4MU User manual
Operating Instructions
3D Eyewear
Model No. TY-ER3D4MU
TY-ER3D4SU
This product cannot be used as sunglasses.
ENGLISH
FRANÇAIS
ESPAÑOL
TQZJ403
ENGLISH
2
Thank you for purchasing a Panasonic
product.
Before operating this product, please read the instructions
carefully, and save this manual for future use.
Before using this product, be sure to read “Safety Precautions”
and “Using Precautions” ( pages 2 - 7).
This 3D Eyewear can be used for Panasonic HDTVs
supporting 3D and Bluetooth® Wireless technology,
that have the logo as shown below. ( page 22)
For the latest information on applicable models, visit
our web site.
http://panasonic.net/
Safety Precautions
Warning
Heating
Do not dispose of 3D Eyewear in re, expose to heat
or leave Eyewear in places that can get hot.
3D Eyewear contains a lithium-ion polymer rechargeable battery.
Heating may result in combustion or rupture the battery that could cause
burns or re.
Place
Do not use 3D Eyewear in hospital or other medical
facilities.
Radio waves from 3D Eyewear may cause interference of medical
equipments.
Do not use 3D Eyewear nearby automatic control
equipments, like a automatic door, a re alarm
apparatus, etc.
Radio waves from 3D Eyewear may cause interference of automatic
control equipments.
Keep 3D Eyewear more than 22 cm (9 in.) away
from the implant of cardiac pacemaker, or similar
implantable medical equipments, at all times.
Radio waves from 3D Eyewear may affect implantable cardiac
pacemaker or similar equipment operations.
ENGLISH
3
Accidental Ingestion
Keep 3D Eyewear parts in places out of the reach of
children.
There is a danger small children could swallow such parts by mistake.
• If a child accidentally swallows such parts, seek immediate medical
attention.
Disassembly
Do not disassemble or modify the 3D Eyewear.
When disposing this product, refer to “Disposal” ( page 11 - 13)
for proper removal and disposal of the rechargeable battery.
Charging
Charge by connecting the included charging cable to
the USB terminal of a Panasonic TV supporting 3D.
Charging with other devices may result in battery leakage, overheating
or rupture.
Do not use the included charging cable for uses other
than charging 3D Eyewear.
Doing so may result in overheating, combustion or damage.
Caution
3D Eyewear
Handle the 3D Eyewear carefully and store in a case
when not in use.
Failure to do so may damage the Eyewear and glass section, which may
result in injury.
Handle the tips of the frame carefully when putting on
the 3D Eyewear as inserting the tip of the frame into
the eye may cause injury.
Always keep the 3D Eyewear in a cool, dry place.
Failure to do so may cause re or electric shock.
Be careful not to close the hinge section of the
3D Eyewear on your nger.
Doing so may result in injury.
• Provide supervision when children are using this product.
(continued overleaf)
ENGLISH
4
Use of 3D Eyewear
Parents/guardians should monitor children’s viewing
habits to avoid their prolonged use without rest
periods.
In commercial application and public viewing,
someone in authority should convey the precautions
and monitor the user of the 3D Eyewear.
Only use the 3D Eyewear for its intended 3D content
viewing purpose.
Do not move around while wearing the 3D Eyewear.
The surrounding area appears dark, which may result in falling or other
accidents that may cause injury.
Inspect the 3D Eyewear for damage before each use.
Viewing of 3D Images
In the event that you experience dizziness, nausea, or
other discomfort while viewing 3D images, discontinue
use and rest your eyes.
• When you set the effect by using “3D adjustment”, take into account
that the vision of 3D images varies among different individuals.
Do not use if the 3D Eyewear is cracked or broken.
Content for 3D viewing includes commercially
available Blu-ray discs, 3D broadcasts, etc..
When preparing your own 3D content, ensure that it is
properly produced.
ENGLISH
5
FCC STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the Panasonic Service Center or an experienced radio/
TV technician for help.
FCC Caution:
To assure continued compliance, follow the attached
installation instructions and use only shielded interface
cable with ferrite core when connecting to computer or
peripheral devices. Any changes or modications not
expressly approved by Panasonic Corp. of North America
could void the user’s authority to operate this device.
FCC Declaration of Conformity
Models: TY-ER3D4MU/TY-ER3D4SU
Responsible Party: Panasonic Corporation of North America
One Panasonic Way, Secaucus, NJ 07094
Contact Source: Panasonic Consumer Marketing Company of North
America
1-877-95-VIERA (958-4372)
email: [email protected]
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
CANADIAN NOTICE:
For Model TY-ER3D4MU/TY-ER3D4SU
This Class B digital apparatus complies with Canadian ICES-003.
(continued overleaf)
ENGLISH
6
Using Precautions
Lens
Do not apply pressure to the liquid crystal shutter. Also, do
not drop or bend the 3D Eyewear.
Do not scratch the surface of the liquid crystal shutter with
a pointed instrument etc. Doing so may cause damage to
the 3D Eyewear, and reduce the quality of the 3D image.
Cautions during viewing
Do not use devices that emit strong electromagnetic waves
(such as cellular phones or personal transceivers) near
the 3D Eyewear. Doing so may cause the 3D Eyewear to
malfunction.
The 3D Eyewear cannot operate fully at high or low
temperatures. Please use within the specied usage
temperature range ( page 15).
If the 3D Eyewear is used in a room in which uorescent
lights (50 Hz) are used, the light within the room may
appear to be ickering. In this case, either darken or switch
off the uorescent lights when using the 3D Eyewear.
Wear the 3D Eyewear correctly. 3D images will not be
correctly visible if the 3D Eyewear is worn upside down or
back-to-front.
Other kinds of displays (such as computer screens, digital
clocks, or calculators etc.) may be difcult to see while
wearing the 3D Eyewear. Do not wear the 3D Eyewear
when watching anything other than 3D images.
For comfortable viewing
View from at least the recommended distance (3 times the
effective height of the screen), Recommended Distance:
TC-P50ST50: 6.23’/1.9m
TC-P65VT50: 7.87’/2.4m
When the top and bottom area of the screen is blackened,
such as movies, view the screen at a distance 3 times
further than the height of the actual image.
(That makes the viewing distance closer than above
recommended distance.)
Stop using the 3D Eyewear immediately if your skin feels
unusual.
In rare cases, the paint or materials used in the 3D Eyewear
may cause an allergic reaction.
Stop using the 3D Eyewear immediately if you experience
any redness, pain, or itching on the nose or temples.
Prolonged use may cause such symptoms due to excess
pressure, which may result in the user feeling unwell.
ENGLISH
7
Use in area of Bluetooth® signals from other devices may
interfere with 3D Eyewear operation.
Using radio waves
This unit uses the 2.4 GHz radio frequency ISM band
(Bluetooth®). However other wireless equipment may use the
same frequency. Be sure to take note of the following to prevent
radio wave interference from other equipment.
Restriction of use
For use only in your country.
Range of use
The range of use is up to approximately 3.2 m (10.5 ft.). The range may
be less depending on the structure of the building, the environment and
any obstacles between the receiver and the transmitter. Such obstacles
as reinforced concrete walls and metal doors, in particular, obstruct the
transmitter’s signals.
Interference from other equipment
Due to radio interference, malfunctions may occur if the unit is placed
too close to other equipment. We recommend keeping the unit as far
away as possible from the following devices:
Bluetooth® devices other than this unit, wireless LAN, microwaves, ofce
automation devices, digital cordless telephones and other electronic
devices.
The unit is designed to automatically avoid radio interference from these
household devices. However malfunctions may happen when radio
interference occurs.
IC STATEMENT
This device complies with Industry Canada licence-exempt RSS
standard(s).
Operation is subject to the following two conditions:
(1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause
undesired operation of the device.
Radio Frequency (RF) Exposure Information
The radiated output power of the Wireless Device is below the Industry
Canada (IC) radio frequency exposure limits.
Accessories
Charging cable ···························································<1>
(K2KYYYY00164)
< > indicates the quantity.
ENGLISH
8
Identifying Controls
Power switch
Indicator lamp
Charging port (DC IN)
Power switch
ON/OFF Slide the tab to the ON/OFF position to switch
the power on/off.
MODE Slide the tab once to the MODE position to
change the mode between 3D and 2D.
• 2D: View a 3D image in 2D.
This is also used when registering the 3D
Eyewear on the television. For details on
registration, refer to the Registration page.
( page 10)
Indicator lamp
Lights or ashes during use or charging to show the status of
the rechargeable battery and registration.
Charging port
Connect the charging cable.
• Charge by connecting the included charging cable.
ENGLISH
9
Indicator lamp status
Indicator lamp Status
Lights red for 2 seconds when
turned on
Suf cient battery level
Flashes red 5 times when
turned on
Low battery level
Flashes red and green
alternately
Under registration
Flashes green once every 2
seconds
Under reconnecting to the TV
Lights green for 3 seconds Registration or reconnecting
is successfully completed.
Flashes red 3 times Automatically power off
(Registration or reconnecting
fails or connection is lost)
Flashes red once every 2
seconds when in use
3D mode is selected
Flashes red twice every 4
seconds when in use
2D mode is selected
Charging
Charging the 3D Eyewear
Connect the 3D Eyewear with the included charging cable to
the television, then switch on the television.
• When the indicator lamp turns off, charging is complete. Refer
to the speci cations on page 15 for the approximate charging
time.
NOTE
• Charge the 3D Eyewear before using the rst time after purchase or
after long periods of disuse.
• Be sure to turn the television power on when charging. The battery will
not be charged when the television power is off.
USB connector
Micro USB connector
ENGLISH
10
Registration
First Registration
Perform the First Registration when the 3D Eyewear is used
for the rst time.
1. Turn on the TV to see and select the 3D mode.
2. Slide the tab from the OFF position to the ON position.
The 3D Eyewear will power on and start registration.
Place the 3D Eyewear within 1.6 feet (50 cm) from the TV
while the registration is in progress.
3. The green LED lights on the 3D Eyewear for 3 seconds when
the registration is successfully completed.
After rst registration, the 3D Eyewear will reconnect with the TV
automatically when 3D Eyewear is powered on near the TV in
3D mode.
Registration Again
When connection with registered TV fails, or when using with
another TV, re-register the 3D Eyewear.
1. Turn on the TV to see.
2. Within 1.6 feet (50 cm) from the TV, hold the tab on the
MODE position for more than 2 seconds.
The registration will start.
3. The green LED lights for 3 seconds when the registration is
successfully completed.
* If the registration failed, the 3D Eyewear will power off.
In this case, power off the TV and perform from step 1.
* Do not connect the charging cable while Registration Again.
* Release the tab when Registration Again starts.
Other manuals for TY-ER3D4MU
2
This manual suits for next models
1
Table of contents
Languages:
Other Panasonic 3D Glasses manuals
Panasonic
Panasonic TY-ER3D4ME User manual
Panasonic
Panasonic TY-EW3D3LW User manual
Panasonic
Panasonic TY-ER3D4SW User manual
Panasonic
Panasonic TY-EW3D3LE User manual
Panasonic
Panasonic TY-ER3D6ME User manual
Panasonic
Panasonic TY-EP3D20E User manual
Panasonic
Panasonic TY-ER3D4MU User manual
Panasonic
Panasonic TY-EP3D10EB User manual
Panasonic
Panasonic TY-EW3D10E Reference guide
Panasonic
Panasonic TY-EW3D10U User manual
Panasonic
Panasonic TY-ER3D5MA User manual
Panasonic
Panasonic TY-EW3D3LU User manual
Panasonic
Panasonic TY-EW3D10E User manual
Panasonic
Panasonic BT-PGL10G User manual
Panasonic
Panasonic TY-EW3D2SU User manual
Panasonic
Panasonic TY-EW3D3LW User manual
Panasonic
Panasonic TY-EW3D10W User manual
Panasonic
Panasonic TY-ER3D4MA User manual
Panasonic
Panasonic TY-EW3D3LE User manual
Panasonic
Panasonic TY-EW3D10U User manual
