Palm Tungsten C User manual

WII Quick Reference Guide—

Palm™ Tungsten C

Contents

Features Reference ________2

Taking Care of Palm™ ____ 4

Common Tasks ___________5

Nomad Wireless Access _____8

System Resets ____________ 9

HotSync® to Computer ____10

Data Input Options _______12

Web Browser Tips ________ 16

Features Reference

1. Color Display of the Home Screen

2. Web Browser

3. Email

4. 5-way Navigator

5. Address Book

6. Date Book

7. Thumb-size Keyboard

8. Power Button

9. Embedded WiFi Antenna (802.11b)

10. Headset Jack (2.5mm)

11. Expansion Slot

12. Universal Connector (for Cradle)

13. Infrared (IR) Port

14. Stylus

(See Handbook p.15-18 for more features)

15. Speaker (on back)

Taking Care of your Palm™

.Touch screen only with stylus or a plastic

.Do not expose to moisture

.Do not expose to extreme heat or cold. r

.To clean your screen, use a dry, lint-free

.Never touch the screen with your hand.

Notes

1tipped item.

3This includes placing it in a window nea

direct sunlight or placing it in a car for

extended periods.

4cloth and gently pat the dust away.

_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

Common Tasks

Power on/off the Palm™

Press (don’t hold) the Power button on the

bottom right side

Navigation

Press Home icon to go to home screen or

exit an application. Press the 5-way Navigator

up/down or left/right to select applications or tap

with the stylus on the application icon.

Calculator

Tap the Calculator icon on the homepage. It

opens a basic calculator.

Recharging the Battery

•Plug the Cradle Adapter

into a standard wall outlet.

•Place the Palm™ into the

Cradle and allow to charge.

•A green light on the top of

the Palm™ will light up to

indicate charging is in progress.

* charge the battery in cradle 15-30 minutes

each day for optimum performance. After

approx. 5 days without charging, all data will

be lost.

Adjust Screen Brightness

Hold Power to bring up Brightness Options

(or Function + Tab )

Reorienting the Touch Screen

Go to Prefs; Digitizer. Touch stylus to indicate

points on the screen.

Beaming a File

•Locate the record, file or category to beam.

•Press Function + Menu

•Tap Beam [Category/ Photo/Record]

•Point IR port toward other Palm’s IR port and

hold at approx. arms length during beaming

Help File

For a tour of basic Palm™ techniques click on the

Quick tour icon and follow through the brief steps.

Setting up WebMail

The Palm can support up to 8 email accounts.

To configure an account with WebMail:

1. Tap VersaMail on your home screen.

2. Press Function + Menu

3. Tap Accounts, Account Setup

4. Tap New, enter a name (like UT)

5. Select Mail Service as Other

6. Select Protocol as IMAP, tap Next

7. Enter NetID and password, tap Next

8. Set the server settings:

Email: NetID@utk.edu

Incoming Mail Server: imap.utk.edu

Outgoing Mail Server: smtp.utk.edu

9. Tap Next, Tap Done, then Tap Ok

You are now able to access WebMail.

* these steps used for yahoo, hotmail, etc. setup.

Configuring MS Outlook

To allow sync with WebMail, on your PC, set

Outlook as the default email handler:

1. Go to the Control Panel. Click Internet

options.

2. Go to Programs tab.

3. Select Outlook as the default e-mail program

and Click Ok.

Steps to create a PDF

1. Create a PDF file on computer.

2. Then send it to Palm™. (refer to p.10 on

HotSync®)

3. To open PDF’s one must have Adobe

Reader installed on the Palm™.

To install go to:

http://www.adobe.com/products/acrobat/

acrrsystemreqs.html/

Nomad Wireless Access

To sync email with your UT Account, you will

need to access the internet. UT’s wireless

network “nomad” makes it simple.

1. Tap the WiFi Setup icon from

Home Screen

2. Tap Next

3. Select nomad and tap Next

or If nomad is not detected, tap other and enter

nomad and tap Ok.

4. Tap Done.

∗In Web Browser, press Menu key

to view WiFi signal strength

∗For more information, go to

http://wireless.utk.edu and

http://oit.utk.edu/helpdesk/section/wireless

System Resets

To perform the three types of system resets, you

must press the Reset button on the back of the

Palm using the reset tool inside the stylus.

Soft Reset

Press the reset button with reset tool in the

stylus. Data should be preserved.

System (Warm) Reset

Press the reset button and hold the Up

navigation button until the Palm is on the

screen. This reset can erase data and is done

when the Palm freezes.

Hard Reset*

Press the reset button and hold the Power

button. Hard Reset erases everything on

the Palm

* WARNING: Resets can erase your Palm

entirely. Check your user manual for more

information before conducting a reset.

HotSync® to Computer

1. Connect the HotSync® cradle to the PC’s USB

port and plug the adapter to the wall.

2. Install Palm™ Desktop Software from the CD.

3. Place the handheld in the cradle.

4. Press the button on the cradle to begin the

HotSync® process.

5. When the HotSync® process is complete, data

should be on both the handheld and PC. In the

event of the same file being edited in both

locations, wireless HotSync® will ask which

version to retain.

Wireless network HotSync

1. Press Home

2. Tap the HotSync icon.

3. Tap Network, and than tap the HotSync icon.

* To avoid data loss, synchronize often.

∗Only synchronize with one computer to

prevent information loss or data corruption.

Other manuals for Tungsten C

Table of contents

Popular Handheld manuals by other brands

Honeywell

Honeywell Dolphin 9900 user guide

Honeywell

Honeywell CN75 user guide

MiTAC

MiTAC Mio 168 user manual

Wasp

Wasp WDT92 user manual

Texas Instruments

Texas Instruments TI-Nspire user guide

AXEM Technology

AXEM Technology MBS user guide

Armstrong

Armstrong Brain Wave Hardware & software installation

Unitech

Unitech TB128 user manual

Symbol

Symbol MC9000-G Product reference guide

Unitech

Unitech HT1 1D Batch user manual

Ingenico

Ingenico IWL220 GPRS Quick reference guide

Intermec

Intermec CK61 user manual

Symbol

Symbol c2000 user manual

Symbol

Symbol MC18 Product reference guide

Acer

Acer n20 manual

Intermec

Intermec CK61 quick start guide

Docomo

Docomo F-04H instruction manual

Toshiba

Toshiba e350 Series user manual