Ozito PMT-004 User manual
1
PMT-004
PETROL 4-IN-1
MULTI TOOL
51.7cc 2-Stroke
INSTRUCTION MANUAL
1120
ozito.com.au
2
RISK OF EXPLOSION OR FIRE
What can happen:
• Spilled petrol and its vapours can become ignited from cigarette sparks, electrical arcing, exhaust
gases and hot engine components such as the muffler.
• Heat will expand fuel in the tank which could result in a fire.
• Operating the tool in an explosive environment could result in a fire.
• Muffler exhaust heat can damage painted surfaces, melt any materials sensitive to heat (such as
siding plastic, rubber or vinyl) and damage live plants. Keep hot tool away from other objects.
• Improperly stored fuel could lead to accidental ignition. Fuel improperly secured could get into the
hands of children or other unqualified persons.
How to prevent it:
• Shut off engine and allow it to cool before adding fuel to the tank.
• Use care when filling the tank to avoid spilling fuel. Move tool away from fuelling area before
starting engine.
• Keep maximum fuel level 20mm below top of tank to allow for expansion.
• Operate and refuel in well ventilated areas free from obstructions.
• Store fuel in a approved container (AS/NZS 2906-1999) for petrol. Store in a secure location away
from the work area. Make sure the container is clearly marked “fuel”.
RISK TO BREATHING
What can happen:
• Breathing exhaust fumes can cause serious injury or death.
How to prevent it:
• Operate tool in a well ventilated area. Avoid enclosed areas.
• Never operate unit in a location occupied by other people or animals.
SAVE THESE INSTRUCTIONS
1) Work area
a)Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b)
Do not operate petrol tools in explosive atmospheres, such as in the presence of flammable liquids,
gases, or dust. Power tools create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while operating a petrol tool.
Distractions can cause you to lose control.
2) Personal safety
a)Stay alert, watch what you are doing and use common sense when operating a petrol tool. Do
not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating power tools may result in serious personal injury.
b)Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal
injuries.
c) Remove any adjusting key or wrench before turning the tool on. A wrench or a key that is left
attached to a rotating part of the petrol tool may result in personal injury.
d)Do not overreach. Keep proper footing and balance at all times. This enables better control of the
petrol tool in unexpected situations.
e)Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.
f) If devices are provided for the connection of dust extraction and collection facilities ensure that
these are connected and properly used. Use of these devices can reduce dust-related hazards.
3) Petrol tool use and care
a)Do not force the petrol tool. Use the correct petrol tool for your application. The correct petrol tool
will do the job better and safer at the rate for which it was designed.
SAFETY INSTRUCTIONS
3
b)Do not use the petrol tool if the switch does not turn it on and off. Any petrol tool that cannot be
controlled with the switch is dangerous and must be repaired.
c) Turn tool off completely before making any adjustments, changing accessories, or storing petrol
tools. Such preventive safety measures reduce the risk of starting the petrol tool accidentally. Hair
can be caught in moving parts.
d)Store idle petrol tools out of the reach of children and do not allow persons unfamiliar with the
petrol tool or these instructions to operate the petrol tool. Petrol tools are dangerous in the hands
of untrained users.
e)Maintain petrol tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the petrol tool’s operation. If damaged, have the petrol tool
repaired before use. Many accidents are caused by poorly maintained petrol tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
g)Use the petrol tool, accessories and tool bits etc., In accordance with these instructions and in the
manner intended for the particular type of petrol tool, taking into account the working conditions
and the work to be performed. Use of the petrol tool for operations different from intended could
result in a hazardous situation.
h)This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
i) Children should be supervised to ensure that they do not play with the appliance.
j) Always hold the equipment firmly in both hands.
4) Service
a)Have your petrol tool serviced by a qualified repair personnel using only identical replacement
parts. This will ensure that the safety of the petrol tool is maintained.
SAFETY INSTRUCTIONS (cont.)
4
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
• Never allow children or people unfamiliar with these instructions to use the line trimmer.
• Avoid using the line trimmer, while people, especially children or pets, are nearby.
• Use the line trimmer only in daylight or good artificial light.
•Maintain a safety distance of 15m. If approached, switch off the equipment immediately.
• Never operate the line trimmer with damaged guards or without guards in place.
• Switch on the line trimmer only when the hands and feet are away from the cutting head.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Disconnect the spark plug from the line trimmer before carrying out maintenance or cleaning work.
• Inspect and maintain the line trimmer regularly. Have the line trimmer repaired only by an authorized
repairer.
• Take care against injury from the blade(s) fitted for trimming the cutting line length. After extending
new cutting line, always return the line trimmer to its normal operating position before switching on.
• Do not operate in a hazardous location. Such areas include where there is a risk of explosion of petrol
fumes, leaking gas or explosive dust.
• Do not operate in a confined area. Exhaust gases, smoke or fumes could reach dangerous
concentrations.
• Protect your tool. This line trimmer is NOT WEATHERPROOF and should not be exposed to direct
sunlight, high ambient temperature and damp, wet or high humidity conditions.
• Do not smoke while refuelling. This is potentially dangerous as it may ignite the fuel and cause an
explosion.
• Take care not to spill fuel. When refuelling the line trimmer ensure that the motor has been switched
off. Prevent the spilling of fuel as this may also ignite with the hot motor. Never refuel whilst the
engine running.
• When not in use, store the line trimmer out of the reach of children.
• Face the cutting head away from yourself, other people and animals,especially during operation.
• Disconnect the spark plug when changing spools or clearing grass from under
the guard.
• Disconnect the spark plug from the line trimmer before making any adjustments.
• Use both handles.
• Keep ventilation openings clear of debris. Keep handles dry, clean and free
of oil and grease.
• Keep your distance. The line trimmer emits exhaust fumes. Ensure bystanders keep a safe distance.
• When using the trimmer, stones, pieces of metal and other objects can be thrown out at high speed
by the blade. The tool and guard are designed to reduce the danger. However, the following special
precautions should be taken:
- Wear safety glasses or other eye protection, gloves, long pants and suitable footwear.
- Make sure that other people and pets are at least 5 metres away.
• Never reach underneath the line trimmer (the cutting line area) until it has completely stopped and
the power has been disconnected.
•Never use a product that has been modified and always use original accessories.
•The blade can recoil suddenly from objects if it cannot cut or mow through them. This can cause
injuries to the arms or legs. Keep bystanders and animals at least 15m away from where you are
working. Always check the blade for signs of damage and replace the blade if it is bent or cracked.
•Carefully check your machine and its fittings for signs of damage every time before use. Do not use
the equipment unless all the blade fittings are installed correctly.
•When you release the throttle lever, the blade will continue to rotate and will only gradually come
to a standstill. A blade which is in the process of rotating to a standstill can cause you or bystanders
injuries through cutting. Before you start any work on the blade, switch off the engine and ensure
that the blade has come to a standstill.
WARNING! When servicing, use only identical replacement parts. Use of any other parts may
create a hazard or cause product damage. To ensure safety and reliability, all repairs should be
performed by a qualified service technician.
WARNING! This appliance is not intended for use by young or infirm persons unless supervised by
a responsible person to ensure that they can use the appliance safely. Young children should be
supervised to ensure that they do not play with the appliance.
LINE TRIMMERS / BRUSH CUTTERS SAFETY WARNINGS
5
• Keep all parts of the body away from the cutter blade. Do not remove cut material or hold material
to be cut when blades are moving. Make sure the switch is off when clearing jammed material. A
moment of inattention while operating the hedge trimmer may result in serious personal injury.
• Carry the hedge trimmer by the handle with the cutter blade stopped. When transporting or
storing the hedge trimmer always fit the cutting device cover. Proper handling of the hedge trimmer
will reduce possible personal injury from the cutter blades.
• Hold the power tool by insulated gripping surfaces only, because the cutter blade may contact
hidden wiring. Cutter blades contacting a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
• Perform visual inspection on the hedge being trimmed. To ensure no wire fences or foreign objects
that the hedge trimmer may contact during operation.
• Never allow children or people unfamiliar with these instructions to use the Hedge Trimmer.
• Avoid using the Hedge Trimmer, while people, especially children or pets, are nearby.
• Use the Hedge Trimmer only in daylight or good artificial light.
• Never operate the Hedge Trimmer with damaged guards or without guards in place.
• Switch on the Hedge Trimmer only when the hands and feet are away from the cutting blades.
• Use only the manufacturer’s recommended replacement parts and accessories.
• Always remove the battery from the Hedge Trimmer when leaving the Hedge Trimmer unattended.
• Always remove the battery from the Hedge Trimmer before carrying out maintenance or cleaning
work.
• Inspect and maintain the Hedge Trimmer regularly. Have the Hedge Trimmer repaired only by an
authorized repairer.
• When not in use, store the Hedge Trimmer out of the reach of children.
• Face the cutting blades away from yourself, other people and animals while the power is connected
to the Hedge Trimmer (especially during operation).
• Use both handles.
• Keep ventilation openings clear of debris. Keep handles dry, clean and free of oil and grease.
• Do Not use if under influence of alcohol, drugs, medication or fatigue.
• Ensure regular breaks are taken if the task entails long duration time.
• Do not run while using hedge trimmer.
• Never operate the hedge trimmer in the rain or in wet conditions.
• Never modify or lock on/off trigger and safety switch on.
• Never reach underneath the Hedge Trimmer (the cutting blade area) until it has completely stopped
and the power has been disconnected.
WARNING! When servicing, use only identical replacement parts. Use of any other parts may
create a hazard or cause product damage. To ensure safety and reliability, all repairs should be
performed by a qualified service technician.
WARNING! This appliance is not intended for use by young or infirm persons unless supervised by
a responsible person to ensure that they can use the appliance safely. Young children should be
supervised to ensure that they do not play with the appliance.
POLE HEDGE TRIMMER SAFETY WARNINGS
6
POLE PRUNER SAFETY WARNINGS
This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
Young children should be supervised to ensure that they do not play with the appliance.
• Keep all parts of the body away from the saw chain when the chain saw is operating. Before you
start the chain saw, make sure the saw chain is not contacting anything. A moment of inattention
while operating chain saws may cause entanglement of your clothing or body with the saw chain.
• Always hold the chain saw with your right hand on the rear handle and your left hand on the front
handle. Holding the chain saw with a reversed hand configuration increases the risk of personal
injury and should never be done.
• Wear safety glasses and hearing protection. Further protective equipment for head, hands, legs
and feet is recommended. Adequate protective clothing will reduce personal injury by flying debris
or accidental contact with the saw chain.
• Do not operate a chain saw in a tree. Operation of a chain saw while up in a tree may result in
personal injury.
• Always keep proper footing and operate the chain saw only when standing on fixed, secure and
level surface. Slippery or unstable surfaces such as ladders may cause a loss of balance or control of
the chain saw.
• When cutting a limb that is under tension be alert for spring back. When the tension in the wood
fibres is released the spring loaded limb may strike the operator and/or throw the chain saw out of
control.
• Use extreme caution when cutting brush and saplings. The slender material may catch the saw
chain and be whipped toward you or pull you off balance.
• Carry the chain saw by the front handle with the chain saw switched off and away from your
body. When transporting or storing the chain saw always fit the guide bar cover. Proper handling
of the chain saw will reduce the likelihood of accidental contact with the moving saw chain.
• Follow instructions for lubricating, chain tensioning and changing accessories. Improperly
tensioned or lubricated chain may either break or increase the chance for kickback.
• Keep handles dry, clean, and free from oil and grease. Greasy, oily handles are slippery causing loss
of control.
• Cut wood only. Do not use chain saw for purposes not intended. For example: do not use chain
saw for cutting plastic, masonry or non-wood building materials. Use of the chain saw for
operations different than intended could result in a hazardous
•Do not use the chainsaw while up a tree.
•Always use the replacement chain bars and chains specified by the manufacturer. Using the wrong
replacement chain bars or chains may cause the chain to break or can result in kickback.
Kickback
Kickback may occur when the nose or tip of the guide bar touches an object, or when the wood closes
in and pinches the saw chain in the cut. Tip contact in some cases may cause a sudden reverse
reaction, kicking the guide bar up and back towards the operator.
Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back towards the
operator.
Either of these reactions may cause you to lose control of the saw which could result in serious personal
injury. Do not rely exclusively upon the safety devices built into your saw. As a chain saw user, you
should take several steps to keep your cutting jobs free from accident or injury.
Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and can be
avoided by taking proper precautions as given below:
• Maintain a firm grip, with thumbs and fingers encircling the chain saw handles, with both hands on
the saw and position your body and arm to allow you to resist kickback forces. Kickback forces can
be controlled by the operator, if proper precautions are taken. Do not let go of the chain saw.
• Do not overreach and do not cut above shoulder height. This helps prevent unintended tip contact
and enables better control of the chain saw in unexpected situations.
• Only use replacement bars and chains specified by the manufacturer. Incorrect replacement bars
and chains may cause chain breakage and/or kickback.
• Follow the manufacturer’s sharpening and maintenance instructions for the saw chain. Decreasing
the depth gauge height can lead to increased kickback.
•Reduce the element of surprise by understanding what causes kickback.
Push Back
Push back will occur if an attempt is made to saw with the top of the guide bar, if the chain touches
against a rigid object and jams in the cut.
Pull Forward
If the bucking spikes are not set against the timber, the chain at the bottom of the guide bar will pull
the saw forward; this can jam the chain in the timber. To avoid this always have the bucking spikes
set against the timber when performing a cut.
7
ENGINE
Engine Power: 51.7cc 2-Stroke
Output: 1.5 kW (2.0HP)
Fuel Tank: 0.9 litres
Fuel Mix: 40:1
Noise Level: 114dB
Max. No Load Speed: 9,600/min
Weight: 4.0kg
SPECIFICATIONS
LINE TRIMMER
Cutting Circle: Ø420mm
Cutting Line: Ø2.4mm x 4m
Feed Type: Bump feed
Weight: 6.8kg
BRUSH CUTTER
Cutting Circle: Ø255mm
Max. Blade Speed: 7,200/min
Weight: 6.8kg
POLE PRUNER
Bar Length: 255mm (10”)
Cutting Length: 200mm (8”)
Max. Cutting Speed: 21.3m/s
Oil Tank Cap.: 150ml
Bar & Chain: Oregon®
Chain Pitch: 9.52mm (3/8”)
Chain Gauge: 1.27mm (0.050”)
Weight: 7.85kg
POLE HEDGE TRIMMER
Cutting Length: 395mm
Blade Length: 430mm
Max. Cutting Cap.: Ø25mm
Weight: 8.34kg
EXTENSION POLE
Length: 720mm
Weight: 0.75kg
8
KNOW YOUR PRODUCT
PETROL 4-IN-1 MULTI TOOL
1. Engine
2. Recoil Starter
3. Fuel Tank
4. Air Filter Cover
5. Line Trimmer/Brush Cutter
Attachment
6. Rear Handle
7. On/Off Switch
8. Throttle Safety
9. Throttle
10. Adjuster Lever
11. Blade Tilt Lock
12. Lock Pin
13. Lock Knob
14. Hedge Trimmer
Attachment
15. Pruner Attachment
16. Chain & Bar Oil Tank
17. Chain Sprocket Cover
18. Safety Guard
19. Harness
20. Extension Pole
21. Blade Cover
22. Knife Edge Blade
23. Bar & Chain
Cover
24. Front Handle
25. Chain
26. Guide Bar
27. Fuel Mixing Bottle
28. Line Spool
29. Brush Cutter Blade
30. Hex Keys M3,M4 & M5
31. Multi-tool
32. Spanner M8/10
33. Blade Nut x 2
34. Pressure Plate
Cover
35. Pressure Plate
36. Carrier Plate
12
3
4
6
8
7
9
5
10
11
14
12
13
17
16
15
9
ONLINE MANUAL
Scan this QR Code with
your mobile device to take
you to the online manual.
20
21
18
19
22
23 24
25
26
27
28
29
31
32
30
33
35
36
34
10
SAFETY INSTRUCTIONS............................................... Page 2
SAFETY WARNINGS...................................................... Page 4
SPECIFICATIONS........................................................... Page 7
KNOW YOUR PRODUCT................................................ Page 8
STEPUP & PREPARATION............................................ Page 11
Assembly.................................................. 11
Line & Spool............................................. 12
Brush Cutter Blade................................... 13
Chain & Bar.............................................. 14
Attachment............................................... 17
Harness.................................................... 18
Fuel.......................................................... 19
OPERATION.................................................................... Page 20
APPLICATIONS............................................................... Page 22
Line Trimmer/Brush Cutter........................ 22
Pole Pruner............................................... 24
Pole Hedge Trimmer................................. 28
MAINTENANCE.............................................................. Page 30
Line Replacement.................................... 30
Maintaining the Guide Bar........................ 32
Hedge Trimmer Blade.............................. 33
ServicingtheAirlter................................ 34
Spark Plug................................................ 34
Cleaning, Storage and Transport.............. 35
TROUBLESHOOTING.................................................... Page 36
DESCRIPTION OF SYMBOLS....................................... Page 37
SPARE PARTS................................................................ Page 38
WARRANTY.................................................................... Page 40
CONTENTS
Table of contents
Other Ozito Power Tools manuals
Ozito
Ozito JSW-6100U Installation instructions
Ozito
Ozito PXDIB-450 User manual
Ozito
Ozito ZLMFTS-012 User manual
Ozito
Ozito JSW-4000 User manual
Ozito
Ozito BDP-450 User manual
Ozito
Ozito OPCS-036 User manual
Ozito
Ozito LRT-4100 User manual
Ozito
Ozito RTS-002 User manual
Ozito
Ozito OZDB45JA User manual
Ozito
Ozito PXHDIS-240 User manual
Ozito
Ozito PXCCSSS-018U User manual
Ozito
Ozito PXCMFTS-018 User manual
Ozito
Ozito RTR-4100 User manual
Ozito
Ozito HGN-2100U User manual
Ozito
Ozito PXHVIS-018 User manual
Ozito
Ozito RTK-2100 User manual
Ozito
Ozito ROU-5000 User manual
Ozito
Ozito OZMPS500A User manual
Ozito
Ozito PXC PXPRU-018 User manual
Ozito
Ozito OMCS-012 User manual
