Owon PDS5022S User manual
PDS Series
Portable Colour Digital Storage Oscilloscope
User Manual
■ PDS5022S
■ PDS6042S
■ PDS6062S
■ PDS6062T
■ PDS7062T
■ PDS7102T
WWW.OWON.COM.CN
June. 2010 edition
Copy Right in this Manual © Lilliput Company. All rights have been reserved.
The Lilliput’s products are under the protection of the patent rights in America and other countries,
including ones which have already obtained the patent rights and those which are applying for. The
information in this manual will replace all that in the materials published originally.
The information in this manual was correct at the time of printing. However, Lilliput will continue to
improve products and reserves the rights to changes specification at any time without notice.
OWON is the registered trademark of the Lilliput Company.
Xiamen Lilliput Technology Co.,Ltd.: the 5th floor, B Area, Chuangxin Mansion, Software
Park,ZhenZhuWan, Huandao RD, Xiamen,Fujian,China
Fujian Lilliput Optoelectronics Technology Co.,Ltd.:The mansion of optoelectronics hengsan road,
Lantian industrial zone ,Zhangzhou,Fujian,China
Tel:+86-592-2575666
Fax:+86-592-2575669
Mail:[email protected].cn
User’s Manual of OWON Colour Digital Storage Oscilloscope
1
General Warranty
The Lilliput warrants that the product will be free from defects in materials and
workmanship for a period of three years from the date of purchase of the product by the
original purchaser from the Lilliput company. And the warranty period of accessories such
as probe, battery, adapter is one year. This warranty only applies to the original purchaser
and is not transferable to the third party. If the product proves defective during the
warranty period, Lilliput either will repair the defective product without charge for parts
and labor, or will provide a replacement in exchange for the defective product. Parts,
modules and replacement products used by Lilliput for warranty work may be new or
reconditioned to like new performance.All replaced parts, modules and products become
the property of Lilliput.
In order to obtain service under this warranty, Customer must notify Lilliput of the defect
before the expiration of the warranty period. Customer shall be responsible for packaging
and shipping the defective product to the service center designated by Lilliput, and with a
copy of customer proof of purchase.
This warranty shall not apply to any defect, failure or damage caused by improper use or
improper or inadequate maintenance and care. Lilliput shall not be obligated to furnish
service under this warranty a) to repair damage resulting from attempts by personnel other
than Lilliput representatives to install, repair or service the product; b) to repair damage
resulting from improper use or connection to incompatible equipment; c) to repair any
damage or malfunction caused by the use of non-Lilliput supplies; or d) to service a
product that has been modified or integrated with other products when the effect of such
modification or integration increases the time or difficulty of servicing the product.
Please contact the nearest Lilliput’s Sales and Service Offices for services or a complete
copy of the warranty statement.
Excepting the after-sales services provided in this summary or the applicable
warranty statements, Lilliput will not offer any guarantee for maintenance definitely
declared or hinted, including but not limited to the implied guarantee for
marketability and special-purpose acceptability. Lilliput should not take any
responsibilities for any indirect, special or consequent damages.
User’s Manual of OWON Colour Digital Storage Oscilloscope
2
Table of Contents
General Safety Information................................................................................................ 4
Safety Notice........................................................................................................................ 5
Safety Symbols..................................................................................................................... 5
General features of the the PDS Serial Oscilloscope......................................................... 7
Junior User's Guidebook..................................................................................................... 8
Introduction to the Front Panel and the User's Interface of the PDS series Oscilloscope....9
Check the Package Contents .................................................................................................... 13
To perform the Function Inspection ........................................................................................ 14
To perform the Probe Compensation.......................................................................................16
To set the Probe Attenuation Coefficient................................................................................. 17
To use the Probe Safely .............................................................................................................18
To perform Self-calibration......................................................................................................19
Introduction to the Vertical System.........................................................................................20
Introduction to the Horizontal System....................................................................................21
Introduction to the Trigger System..........................................................................................22
Advanced User's Guidebook ............................................................................................. 23
To set the Vertical System ......................................................................................................... 24
Perform Mathematical Manipulation Function ..................................................................... 30
Using FFT function ................................................................................................................................ 31
Application of VERTICALPOSITION and VOLTS/DIV Knobs.........................................36
To set the Horizontal system.....................................................................................................37
To set the Trigger System..........................................................................................................39
Trigger Control.......................................................................................................................... 40
The trigger control of PDS5022S、PDS6042S、PDS6062S、PDS6062T........................................... 40
The trigger control of PDS7062T、PDS7102T ..................................................................................... 45
User’s Manual of OWON Colour Digital Storage Oscilloscope
3
To operate the Function Menu ................................................................................................. 52
To perform Sampling Setup...................................................................................................... 52
To set the Display System..........................................................................................................54
To Save and Recall a Waveform...............................................................................................58
To perform the Auxiliary System Function Setting................................................................60
To perform the Automatic Measurement................................................................................62
To perform the Cursor Measurement...................................................................................... 65
To use Autoscale.........................................................................................................................68
To use Executive Buttons..........................................................................................................71
Quick Start Guide.............................................................................................................. 72
Example 1: Measurement of Simple Signals...........................................................................72
Example 2: Gain of the Amplifier in the Metering Circuit....................................................73
Example 3: Capture the Single Signal.....................................................................................74
Example 4: Analyze the Details of a Signal............................................................................. 77
Example 5: Application of X-Y Function................................................................................79
Example 6: Video Signal Trigger..............................................................................................80
Troubleshooting.................................................................................................................83
Appendix A: Technical Specifications .............................................................................. 84
Appendix B: Package Contents......................................................................................... 90
Appendix C: Maintenance, Cleaning and Repairing....................................................... 90
Appendix D: Battery Using Guide.................................................................................... 91
User’s Manual of OWON Colour Digital Storage Oscilloscope
4
General Safety Information
Before any operations, please read the following safety precautions to avoid any
possible bodily injury and prevent this product or any other products connected
from damage. In order to avoid any contingent danger, this product is only used
within the range specified.
Only the qualified technicians can perform the maintenance.
Prevent the Fire or Bodily Injury.
Use the proper power line. Only use the power cord specially provided for this
product or that has been approved to be used in this user state.
Connect or Disconnect Correctly. When the probe or testing wire is connected to the
power lead, please do not connect and disconnect the probe or testing wire freely.
Ground. This product is grounded through the power lead grounding conductor. In
order to prevent any electric shocking, the grounding conductor must be connected to
the ground. It requires guarantee that this product has been already grounded correctly
before any connection with its input or output terminal.
Connect the probe correctly. The grounding end of the probe corresponds to the
grounding phase. Please don't connect the grounding end to the positive phase.
Pay attention to the nominal values of all terminals. In order to prevent any fire or
electric shock risks, please pay attention to all the nominal values and marks of this
product. Before perform any connections for this product, please read the user's
manual of this product to understand the information about the rated values further.
Do not make any operations without the instrument cover installed. If the cover
or panel has already been removed, please don't operate this product.
Use the proper fuse. Only the fuse complying with the specified type and nominal
value for this product can be used.
Avoid touching any exposed circuit. When the product is on power, please don't
touch the uncovered contacts and parts.
Please don't make any operations while there is an uncertain fault emerged. If
suspecting damage to this product, please contact the qualified maintenance personnel
for check.
Keep a good ventilation condition. Please consult the detailed installation
instruction in the user's manual so that this product can be erected correctly, keeping it
under a good ventilation condition.
Please do not make any operations in a moist environment.
Please do not make any operates in an explosive environment.
Keep the products surface clean and dry.
User’s Manual of OWON Colour Digital Storage Oscilloscope
5
Safety Notice
The following notice may appear on the products:
Warning. Awarning statement indicates the conditions and actions which may
endanger the life safety.
Note.A note statement indicates the conditions and actions which may cause
damage to this product or other property.
Danger: It indicates that there may be an immediate injury to you when you encounter
this mark.
Warning: It indicates that there may not be an immediate injury to you when you
encounter this mark.
Note: It indicates that there may be damage to this product or other property.
Safety Symbols
The following symbol may appear on the products:
High Voltage Please Consult the Manual Protective Ground End Earth Chassis Ground Earth Ground
User’s Manual of OWON Colour Digital Storage Oscilloscope
6
To avoid body damage and prevent product and connected equipment damage. This
product can only be used in the specified applications. Carefully read the following safety
information before using the test tool.
Warning:
When use BC(battery charge) as power supply, to avoid fire or electrical shock if a
test tool input is connected to more 42V peak (30Vrms) or on circuits of more than
4800VA:
zOnly use accessory insulated voltage probes, test lead
zBefore use, inspect oscilloscope probes, accessories for mechanical damage and
replace when damage.
zRemove all probes, test leads and accessories that are not in use.
zRemove computer data line
zDo not apply input voltages above the rating of the instrument Use caution when
using 1:1 test leads because the probe tip voltage will be directly transmitted to
the oscilloscope.
zDo not use exposed metal BNC or banana plug connectors
zDo not insert metal objects into connectors.
User’s Manual of OWON Colour Digital Storage Oscilloscope
7
General features of the the PDS Serial
Oscilloscope
Model Bandwidth SampleRate
PDS5022S 25MHz 100MS/s
PDS6042S 40MHz 250MS/s
PDS6062S 60MHz 250MS/s
PDS6062T 60MHz 250MS/s
PDS7062T 60MHz 500MS/s
PDS7102T 100MHz 500MS/s
Record length of 5,000 points for each channel;
Reading-out with the cursor;
Twenty automatic measurement functions;
Autoscale function;
Color liquid crystal display of high resolution and high contrast;
Storage and recall waveforms;
Automatic setting function provided capable of fast setting;
Multiple-waveform calculation function;
Built-in FFT function;
Perform detecting the average and peak values of the waveform;
Digital real-time oscilloscope;
Edge,video and Alternating triggering function;
RS232 or USB communication ports;
Different continuous displaying time;
Multiple language User interface.
User’s Manual of OWON Colour Digital Storage Oscilloscope
8
Junior User's Guidebook
This chapter deals with the following topics mainly:
zIntroduction to the front panel and the user’s interface of the PDS series oscilloscope
zTo perform the general inspection
zTo perform the function inspection
zTo perform the probe compensation
zTo set the probe attenuation coefficient
zTo use the probe safely
zTo perform an self-calibration
zIntroduction to the vertical system
zIntroduction to the horizontal system
zIntroduction to the trigger system
This manual suits for next models
5
Table of contents
Other Owon Test Equipment manuals
Owon
Owon VDS6000 Series User manual
Owon
Owon HDS272S User manual
Owon
Owon FDS Series User manual
Owon
Owon HDS300 Series User manual
Owon
Owon 4-CH VDS6000 Series User manual
Owon
Owon SDS series User manual
Owon
Owon HDS200 Series User manual
Owon
Owon AG4151 User manual
Owon
Owon SDS6062 User manual
Owon
Owon SDS series User manual
Owon
Owon HDS2202 User manual
Owon
Owon AS Series User manual
Owon
Owon SDS-E Series User manual
Owon
Owon SDS1052 User manual
Owon
Owon XDS3104A User manual
Owon
Owon SDS series User manual
Owon
Owon MSO series User manual
Owon
Owon tds series User manual
Owon
Owon VDS Series User manual
Owon
Owon MSO7062TD User manual
