Outback TPA101-6 Quick reference guide

ASSEMBLY & OPERATING INSTRUCTIONS

OUTBACK COMMERCIAL

Model: TPA101-6

Chapter 1: Safety Information

Chapter 2: Package Contents List

Chapter 2: Hardware Contents List

Chapter 3: Assembly

Chapter 4: Leak Testing

Chapter 5: Important Information

Chapter 6: Gas, Regulator and Hose

Chapter 7: Installation

Chapter 8: Operation

Chapter 9: Care and Maintenance

Chapter 10: Technical Specifications

Chapter 11: Troubleshooting

Chapter 12: Parts Diagram

Chapter 13: Parts List

Page Table of Contents

Safety Information

•

For outdoor use only. Not for commercial use.

Read instructions before using the appliance. Failure to follow

instructions could result in death, serious bodily injury, and/or property

loss.

Warning: accessible parts may be very hot. Keep young children and

pets away.

Do not move the appliance during use.

Any modification of the appliance, misuse, or failure to follow the

instructions may be dangerous and will invalidate your warranty. This

does not affect your statutory rights.

For Flare-up control please refer to the ‘OPERATION’ section of this manual.

Retain these instructions for future reference.

Turn off the gas supply at the gas bottle after use.

Leak test annually, and whenever the gas bottle is removed or replaced.

Check that the hose connections are tight and leak test each

time you reconnect the gas bottle.

FOR YOUR SAFETY

If you smell gas:

Shut off gas to the appliance.

Extinguish any open flame.

Open barbecue lid or hood.

If odour continues, discontinue use and contact your local dealer.

WARNING

Do not store or use petrol or other flammable vapours or liquids in the

vicinity of this or any other appliance.

A gas bottle not connected for use must not be stored in the vicinity of

this or any other appliance.

A. Firebox --------1pc. B. Cart Assembly-----1pc. C. Cooking Griddle--1pc.

D. Wheel Cap------2pcs E. Wheel----2pcs F. Wheel Axle- ------1pc.

G. Side Shelf Support-----2pcs. H. Swivel Caster with Brake---1pc I. Swivel Caster---------1pc.

J. Grease Cup Holder----- 2pcs. K. Grease Cup----------2pcs. L. Flame Tamer----------5pcs.

M. Gas Grill Cooking Grid---

3pcs N. Rubber Stopper--------2pcs Carefully unpack the packing

box and remove all contents

before commencing

assembly. Make sure that

you obtain all correct

package contents.

AA BB CC

Item Description Quantity

AA 1/4-in. x 15-mm Round Head Screw 20

BB Allen Key 1

CC M12. Nut 2

DD 1/4-in. x 12-mm Round Head Screw 2

EE 1/4-in Flat washer 2

FF 1/4-in Lock washer 8

FFEE

Package Contents List

Hardware Contents List

UNPACKING

CAUTION: Obtain the aid of an assistant when

handling large or heavy grill components.

1. Once the top of shipping box is open, obtain

the aid of an assistant and lift the cardboard

sleeve up over Firebox and components.

2. Use sleeve as a work surface to protect floor

and grill parts from scratches.

3. Remove all packing materials from around grill

exterior.

4. Open both Firebox lids and remove packing

materials and components inside each Firebox

chamber.

Assembly

Latch

5. Open the four latches as below.

6. With the help of an assistant, lift the firebox (A)

away from the cart assembly (B) separating the

two pieces. Remark: the lighting stick is

preassembled on the cart leg

7. Attach the wheel axle (F) through the cart

legs, as shown below picture, then attach the

two wheels (E) with two M12 nuts (CC), and

attach two wheel caps (D) with two 1/4-in. x 12-

mm round head screws (DD) and two1/4-in flat

washers (EE) at the end of the wheel axle (F).

8. Attach the swivel casters (I) and swivel caster

with brake (H) using eight 1/4" x15 mm round head

screws (AA) with 1/4-in lock washer (FF), four for

each caster. Ensure the swivel caster with brake

（H) is at the front of the cart frame. Tighten the

eight screws.

9. Attach the right side shelf support (G) with six 1/4‘’ x

15mm round head screws (AA), repeat the same step

to attach left side shelf support. Ensure all screws are

secured tightly. Make sure the side shelf buffers are

pointing upward when attaching the side shelf support.

10. With the help of an assistant, align the grill

body to the cart as shown below, then lock the four

latches, securing the firebox to the cart.

11. Open the latch between side shelf, left &

right.

12. Unfold side shelf, left & right and wind shield

and place the tabs of the side wind shields into

the small openings securing the windshield.

Remark: The lighting stick is preassembled on

the cart leg

Assembly

13. Place the flame tamer (L) and gas grill cooking

grids (M) in the firebox and secure them. Then place

the cooking griddle (C) as shown below.

NOTE: Rubber stoppers are provided and

should only be used for transportation of the

unit. Place rubber stopper into the grease

drainage hole when you have finished cooking

and the grill has cooled. This will help to avoid

grease dripping from the firebox during

transport.

WARNING

Please remove the rubber stopper from the

grease hole before using.

14. Put the grease cups (K) into grease cup holder

(J). Then hang the grease cup holder on the bottom

of the firebox, as shown below.

15. To install the battery ( not supplied), turn the

ignition button cap counterclockwise and remove it.

Insert the battery into the housing with the positive (+)

terminal facing outward. Screw the ignition button cap

back into place.

Assembly

13. Place the flame tamer (L) and gas grill cooking

grids (M) in the firebox and secure them. Then place

the cooking griddle (C) as shown below.

NOTE: Rubber stoppers are provided and

should only be used for transportation of the

unit. Place rubber stopper into the grease

drainage hole when you have finished cooking

and the grill has cooled. This will help to avoid

grease dripping from the firebox during

transport.

WARNING

Please remove the rubber stopper from the

grease hole before using.

14. Put the grease cups (K) into grease cup holder

(J). Then hang the grease cup holder on the bottom

of the firebox, as shown below.

15. To install the battery ( not supplied), turn the

ignition button cap counterclockwise and remove it.

Insert the battery into the housing with the positive (+)

terminal facing outward. Screw the ignition button cap

back into place.

Assembly

Important Information

Please read these instructions carefully before assembly and use of your barbecue.

•

Retain these instructions for future reference.

This product is for outdoors use only. Do not use indoors.

Remove plastic wrap from any part before lighting.

Do not use within 1m of any flammable structure or surface. Do not use under any

combustible surface.

Open the barbecue lid before lighting.

Once lit, do not move the barbecue until it has completely cooled, after use.

This barbecue must not be left unattended when lit.

The lid handle can become very hot. Grip only the centre of the handle. Always use

oven gloves when cooking or carrying out any adjustments to the barbecue.

Use purpose designed barbecue tools with long, heat resistant handles.

Use caution when opening the lid, as hot steam inside is released upon opening.

Parts of this barbecue become very hot – care must be taken, especially when

children, elderly people, and animals are present.

Never cover a barbecue until it has completely cooled.

Use this barbecue only on a stable, flat surface.

Do not store flammable materials near this barbecue.

Do not use aerosols near this barbecue.

Failure to follow the manual’s instructions could result in serious injury or damage.

Modification of the barbecue may be dangerous, is not permitted and will nullify any

warranty. regarding these instructions, contact your local dealer.

Turn off the gas supply at the gas bottle after use.

Do not use the barbecue or store gas bottles below ground level. LP gas is heavier

than air so if a leak occurs the gas will collect at a low level and could ignite in the

presence of a flame or spark.

For use with LPG bottled gas only. A suitable regulator must be used for butane,

propane or mixes.

LP gas bottles should never be placed directly underneath the barbecue.

LP gas bottles should never be stored or used laid on their side, in the horizontal

position. A leak would be very serious and liquid could enter the gas line with serious result.

Never store gas bottles indoors.

Before you use your barbecue, perform a leak test. This is the only safe and sure way

to detect any gas leaking from joints and connections of the barbecue after assembly.

Leak test annually, and whenever the gas bottle is removed or replaced.

Gas, Regulator and Hose

This barbecue can use either propane or butane or propane / butane mixed LPG (liquid

petroleum gas) bottled gas. Propane bottles, will supply gas all year round, even on

cold winter days. Butane bottles will supply sufficient gas in summer, but it may affect

the performance of the barbecue and restrict the heat output available from the burners,

particularly once the gas temperature starts to fall below +10°C. A spanner may be

required to change gas bottles. Check that you have the correct gas bottle and regulator

for your barbecue.

Do not stand the bottle on the cart base.

YOU MUST HAVE THE PROPER REGULATOR AND BOTTLE IN ORDER FOR THE

BARBECUE TO OPERATE SAFELY AND EFFICIENTLY. USE OF AN INCORRECT OR

FAULTY REGULATOR IS DANGEROUS AND WILL INVALIDATE ANY WARRANTY.

Please consult your local gas dealer for the most suitable gas bottles and regulators.

•

The hose should hang freely with no bends, twisting, tension, folds, or kinks that

could obstruct free flow of gas. Always inspect the hose for cuts, cracks, or excessive

wear before use.

Apart from the connection point, no part of the hose should touch any hot barbecue

parts. If the hose shows any sign of damage it must be replaced with a hose suitable

for use with LP gas which meets the national standards for the country of use.

The length of hose should not exceed 1.5 metres.

Table of contents

Other Outback Grill manuals

Outback

Outback Spectrum 2 Burner User manual

Outback

Outback Meteor MT-H4430-3 User manual

Outback

Outback Mayfair User manual

Outback

Outback Omega 250 User manual

Outback

Outback Trekker RG47B User manual

Outback

Outback TS201 User manual

Outback

Outback MS4464 User manual

Outback

Outback THG3302P User manual

Outback

Outback RB-H5060 User manual

Outback

Outback Omega 200 User manual

Outback

Outback Phoenix 4 Burner Black User manual

Outback

Outback Excel Onyx 2 User manual

Outback

Outback ONYX 4 Burner User manual

Outback

Outback Diamond Hooded User manual

Outback

Outback Omega 100 User manual

Outback

Outback MS4464 User manual

Outback

Outback Spectrum User manual

Outback

Outback Meteor Select MS4431 User manual

Outback

Outback Omega 100 User manual

Outback

Outback Omega 100 User manual

Outback

Outback RS4491 User manual

Outback

Outback Cook Dome 701 User manual

Outback

Outback MS4464 User manual

Outback

Outback PX-H4460 User manual

Popular Grill manuals by other brands

Orbegozo

Orbegozo GR 2300 instruction manual

bora

bora PT11 Operating and installation instructions

Klarstein

Klarstein 10031664 manual

Garland

Garland MWE3W Installation and operation manual

Char-Broil

Char-Broil 463722714 Product guide

Nexgrill

Nexgrill 720-0830HK Operating instruction

Kenmore

Kenmore 415.16123800 Use and care guide

Camp Chef

Camp Chef PG24CLAU Warning & instruction booklet

Tucker Barbecues

Tucker Barbecues GTR Series Assembly, installation and operating instructions

Monogram

Monogram ZGG540NCP1SS owner's manual

Equipex

Equipex Sodir Savoy Operation manual

Gaggenau

Gaggenau VR 414 610 use and care manual

Miele

Miele KM 408-1 operating instructions

George Foreman

George Foreman GGR50B owner's manual

AOG

AOG T series quick start guide

Gorenje

Gorenje TG2000CB Instruction manua

Weber

Weber Genesis Silver-B Permamount NG 051701 owner's guide

Glen

Glen SA 3037 user guide