Oursson MG1310/GA User manual

Meat grinder MG1310/GA MG1310/DC

MG2010/OR MG2010/RD

Instruction manual

with a warranty card

Congratulation on buying your new Meat grinder!

CONTENT

Introduction

4Safety Instructions

6Recommendations for the installation,

operation, maintenance and storage

6Features

7Purpose

7Preparing the meat grinder

8Product set MG2010/MG1310

11 Elements of Design

Operation

12 Assembling the meat grinder

16 Operation

16 Reverse

16 Automatic engine protection

Possible problems and solutions

17 Possible problems and solutions

Other

18 Specifications

19 Cleaning and maintenance

22 Servicing

INTRODUCTION

SAFETY INSTRUCTIONS

Danger symbol

A reminder to user about high voltage.

Warning symbol

A reminder to user about the necessity of operating exactly according to the instructions.

When using electrical appliances should take the following precautions:

• Use the device according to the following instructions manual.

• Install the device on a stable surface.

• Use only the tools, which are included in the product set.

• To protect against risk of electrical shock do not put the cord in water or other liquid. If for some

reason the water got into the unit, contact an authorized service center (ASC) OURSSON AG.

• For power supply, use a power grid with proper characteristics.

• Do not use the device in areas where the air can contain vapors of flammable substances.

• Never attempt to open the device by yourself – it could possibly be the reason of an electrical

shock can lead to product malfunction and will invalidate the manufacturer’s warranty. For

repair and maintenance, contact only authorized service centers meant for repair of products

under the trademark OURSSON.

• When moved from a cool to a warm place and vice versa unpack it before use and wait 1-2 hours

without turning it on.

• In order to prevent electrical shock do not immerse the electric engine or the wires into the

water.

• Be particularly careful and cautious when using the device near children.

• Do not touch any moving parts, as this may cause injury.

• The power cord is specially made relatively short in order to avoid the risk of injury.

• Do not allow the cord to hang over the sharp edge of the table or touch hot surfaces.

• Do not connect this device to a grid which is overloaded with other appliances: it can lead to the

fact that the device will not function properly.

INTRODUCTION

• After use, make sure to disconnect the device from the power grid.

• Keep the device from bumps, falls, vibration and other mechanical influences.

• Make sure to disconnect the device from the power grid before cleaning or changing accessories.

• Do not use the device outdoors.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge. They can only use the

device under the supervision of the person responsible for their safety, or after instruction on

the safe use of the device. Do not allow children to play with the product.

• Use the product for its intended purpose.

• This product is intended only for use in the home.

• If the power cord is damaged, it must be replaced by a specialist from the authorized service

center ( ASC ) OURSSON AG to avoid danger.

• Use only the tools, which are included in the product set.

• When cleaning the appliance do not use abrasives and organic cleaners (alcohol, gasoline,

etc.).

• When cleaning the device it is allowed to use a small amount of neutral detergent.

• Do not use the device for processing solid products as blades and nozzles can blunt.

• To avoid injuries, before assembly, place the device on a flat, clean surface.

• When moving the device, keep both hands on the body. Do not hold the device by the neck or

tray.

INTRODUCTION

• Please read the instruction manual before using the device. Keep the manual after reading for

further use.

• All illustrations in this manual are schematic representations of real objects, which may differ from

the actual images.

• To avoid injuries, be careful when assembling the cutting parts of the meat grinder.

• High performance:

60 kg/h for MG1310;

85 kg/h for MG2010;

• Automatic engine overheat protection;

• Reverse;

• Low noise level;

• Preparing mince;

• Preparing sausages and meatballs;

• Fruit and vegetables attachments;

• Hard cheese(Parmesan) attachment*;

• Perforated discs made of cast stainless steel;

• Anticorrosion coating of the screw;

• Stainless steel knife;

• Various colors:

MG1310/GA – green apple;

MG1310/DC – dark cherry;

MG2010/OR – orange;

MG2010/RD – red;

* Only for MG2010

RECOMMENDATIONS FOR THE INSTALLATION, OPERATION, MAINTENANCE

AND STORAGE

NOTE! Do not apply physical force to the device, as this may damage the device due

to the user’s fault.

NOTE! Do not allow bones or other solid objects to fall into the meat grinder. Before

grinding, make sure that the product is completely defrosted. Before grinding

meat or vegetables, make sure that they are cut in pieces that easily slip

through the filling tray’s opening.

FEATURES

INTRODUCTION

PURPOSE

OURSSON electric meat grinder is purposed for:

• Preparing mince;

• Preparing sausages;

• Preparing meatballs;

• Grating and slicing fruits and vegetables;

• Grating hard cheese (Parmesan).

PREPARING THE MEAT GRINDER

Before using the meat grinder, follow safety precautions and follow these steps:

• Unpack the meat grinder;

• Remove all packing material and stickers;

• Preserve the original packaging

• Check the product set

• Read the precautions

• Check the device for defects and deformities

• Wash the screw, knife, grating, attachments, pusher and filling tray under running water and

let them dry.

• Assemble the device the way you need it.

• Set the device on a solid, stable, flat, non-metallic surface away from heat sources. Make sure

that the stand doesn’t slip on the surface

• Plug in the device.

• Make sure there are no sparks or burning smell in the joints of the plug and socket. If there are

sparks and a burning smell, unplug the device, contact an organization serving your electrical

network, and authorized OURSSON AG service center.

INTRODUCTION

Name Schematic sketch Qty (pcs.)

in MG2010

Qty (pcs.)

in MG1310

Body 1 1

Filling tray 1 1

Pusher 1 1

Meat cutting block 1 1

Screw 1 1

Locking ring 1 1

Blade 1 1

PRODUCT SET MG2010/MG1310

INTRODUCTION

Name Schematic sketch Qty (pcs.)

in MG2010

Qty (pcs.)

in MG1310

Perforated disk 8 mm

holes

1 -

Perforated disk 5 mm

holes

1 1

Perforated disk 3,2 mm

holes

1 1

Separator 1 1

Locking attachment 1 1

Sausage attachment

(Sml)

1 1

Sausage attachment

(Midl)

1 1

Sausage attachment

(Big)

1 -

Vegetables cutting

block

1 1

INTRODUCTION

Name Schematic sketch Qty (pcs.)

in MG2010

Qty (pcs.)

in MG1310

Grater and slicer

pusher

1 1

Parmesan grater

attachment

1 -

Grater attachment

(Sml)

1 1

Grater attachment

(Big)

1 1

Slicer attachment (Big) 1 1

Slicer attachment (Sml) 1 -

Recipe book 1 1

Warranty card 1 1

Instructions manual 1 1

This manual suits for next models

Table of contents

Other Oursson Meat Grinder manuals

Oursson

Oursson MG2000 User manual

Popular Meat Grinder manuals by other brands

Klarstein

Klarstein Mett Max manual

Grizzly

Grizzly H7778 instruction sheet

Hobart

Hobart 4822 instruction manual

Tasin

Tasin TS-108 operating instructions

Adler Europe

Adler Europe AD 48 user manual

camry

camry CR 4802 user manual

Bake Max

Bake Max BMMG001 Operation manual

Lumme

Lumme LU-MG2113A user manual

Weston

Weston 35-3201 instructions

Lumme

Lumme LU-2101 instruction manual

GoWISE USA

GoWISE USA GW88012 user manual

MPM

MPM MMM-07M user manual

Weston

Weston 82-0101-W instructions

BIRO

BIRO 3334SS Operating and service manual

HOFFEN

HOFFEN MG-0440 instruction manual

Scarlett

Scarlett SC-MG45M18 instruction manual

Adcraft

Adcraft MG-1 quick start guide

Johnson

Johnson tomit Instructions for use