oticon FittingLINK WP-2 User manual
INSTRUCTIONS FOR USE
Introduction to this booklet
Thank you for choosing our product as your means to fast, reliable fitting. To support
your efforts, we have put great care and attention into making sure that FittingLINK
is of the highest quality and is easy to use and maintain.
FittingLINK ensures a fast and reliable connection between the PC and the client’s
hearing instruments via Bluetooth technology.
This booklet guides you on how to use and maintain FittingLINK. Please read the
booklet carefully including the Warning section. This will help you to achieve the full
benefit of FittingLINK. The booklet contains important information about preparing
and using FittingLINK on your PC. It describes the most frequently used functions,
which must be understood before you start to use FittingLINK. The manual also
contains instructions and important information about the handling of your FittingLINK
and FittingLINK charger. For specific information about how to use FittingLINK with
your fitting software, please refer to the documentation delivered with your fitting
software (e.g. installation handbooks, help files or instructional videos).
If you have additional questions about the use of FittingLINK, please contact your
supplier’s support function.
Intended use
FittingLINK is an accessory to fitting software used when programming wireless hearing
instruments. FittingLINK is intended for wireless transfer of fitting data between the
hearing instruments and the device running the fitting software. FittingLINK can be
connected to the device running the fitting software through the provided Bluetooth
adapter or USB cable.
FittingLINK is intended to be used by Hearing Care Professionals and hearing instrument
users.
Contents
Instrument view 7
Package content 8
Basic functions - first-time use 10
Turning FittingLINK ON/OFF 11
How to charge FittingLINK 12
Charging FittingLINK with the charger and charging cradle 14
Charging FittingLINK with the charging cradle and USB cable 15
Charging FittingLINK without the charging cradle 17
Battery low indicator 18
Connect to a PC 20
Connect to a PC via the Bluetooth adapter 21
How to re-establish pairing between FittingLINK and the Bluetooth adapter 22
Connect to a PC via the USB cable 25
FittingLINK and your fitting software 26
How to use FittingLINK 27
6 7
How to use FittingLINK on children 34
How to use FittingLINK for coupler-based verification using
hearing instrument analysers 36
Overview of the LED indicators 38
Cleaning and maintenance 42
Warnings 44
Technical information FittingLINK 48
Technical information Bluetooth adapter 50
Technical information 53
International warranty 54
Instrument view
Neck loop
Front LED
indicator - blue
Front LED
indicator - red
Top LED indicator
Power supply
(and USB port)
ON/OFF button
ON/OFF
InstructIons for use
8 9
Package content
FittingLINK – what is in the box?
The FittingLINK box consists of the following elements:
USB cable 3 m
Box 1 Box 3Box 2
Bluetooth adapter
Charging cradle
Clip
Charger*
* Charger will vary from
country to country.
This guide (Instructions for Use)
POWER
10 11
Basic functions - first-time use
Insert the USB cable in the bottom of the charging cradle and the charger is ready for use.
Turning FittingLINK ON/OFF
Power on
Press the ON/OFF button on top of FittingLINK for approx. 2 seconds until you see a
green steady light from the top LED and a short red and blue flash from the front LED
indicators. The LED lights indicate that FittingLINK is powered on and you can release the
ON/OFF button.
If FittingLINK cannot power on, make sure it is charged.
If the top LED shows a red light instead of the green light the battery is running low
(steady red light) or very low (flashing red light) and FittingLINK should be charged.
Please refer to “See how to charge FittingLINK”.
Power off
Press and hold the ON/OFF button on top of FittingLINK for approx. 2 seconds until the
top LED indicator turns off.
12 13
How to charge FittingLINK
FittingLINK uses an internal rechargeable battery.
FittingLINK can be charged either by using the provided charger and charging cradle or by
using the USB cable provided.
When charging FittingLINK for the first time, it should be left to charge for at least two
hours even if the top LED indicator on the device shows that the battery is fully charged.
We recommend that you turn off and store FittingLINK in the charging cradle whenever it
is not in use, to ensure the best possible performance.
It is safe to leave FittingLINK in the charging cradle overnight – the battery cannot be
overcharged.
FittingLINK charging indicator
Charging
Top LED
indicator
Description
Device on and fully charged
Device on and charging
Device off and charging
Once fully charged, the LED will be off
Steady Flash
IMPORTANT NOTICE
When recharging FittingLINK, use the supplied original power
supply 5.0V/1A, CE and safety marked.
IMPORTANT NOTICE
When recharging, the charging indicator[s] should be lit as described in this booklet.
If the charging indicator is not lit, disconnect the device from the charger and consult
your supplier's support function.
14 15
Charging FittingLINK with the charger and
charging cradle
Simply place FittingLINK in the charging cradle when you want to charge FittingLINK with
the provided charger and charging cradle. Remember to connect the charger to a power
outlet. As soon as the power is switched on, FittingLINK will start charging.
Charging FittingLINK with the charging cradle and
USB cable
When charging FittingLINK with the provided charging cradle and the USB cable, place
FittingLINK in the charging cradle and connect the USB cable to a USB port on your PC.
16 17
Please note that if you charge via a USB hub, some hubs do not deliver enough power
to actually charge FittingLINK. In this case we recommend use of the provided charger
instead.
Only recharge FittingLINK using the provided charger or a stabilised USB hub/charger
that provides 5VDC and ≥500 mA.
IMPORTANT NOTICE
When using the USB cable, always insert the USB cable into FittingLINK before
connecting the cable to other equipment.
Charging FittingLINK without the charging cradle
If you prefer not to use the charging cradle when charging FittingLINK, you have the
option to insert the USB cable directly into FittingtLINK instead of the charging cradle.
18 19
Battery low indicator
FittingLINK will indicate low battery (approx. 20 minutes programming capacity left) with
a steady red light, and very low battery (approx. 5 minutes programming capacity left)
with a flashing red light.
Battery low indicator
Top LED
indicator
Description
Low battery – approx. 20 minutes capacity left
Very low battery – approx. 5 minutes capacity left
Steady Flash
To ensure the best possible performance, we recommend that you turn off and store
FittingLINK in the charging cradle whenever it is not in use.
The battery should not be drained completely. Keeping the battery fully charged will
prolong the capacity of the battery. The battery cannot be replaced by the user.
The battery capacity is up to 8 hours of typical daily use.
Battery charge time is 2 hours for complete charge, using the provided power supply.
Table of contents
Other oticon Hearing Aid manuals
oticon
oticon More User manual
oticon
oticon Real miniBTE R User manual
oticon
oticon FittingLINK 3.0 User manual
oticon
oticon Agil User manual
oticon
oticon Nera2 Pro Ti User manual
oticon
oticon Oticon Opn S 1 miniRITE R User manual
oticon
oticon ConnectLine Streamer Pro 1.3A User manual
oticon
oticon Opn Series User manual
oticon
oticon miniBTE Alta2 User manual
oticon
oticon Vigo Connect Assembly instructions
oticon
oticon BTE User manual
oticon
oticon Steamer User manual
oticon
oticon BTE UP User manual
oticon
oticon Intiga Rite User manual
oticon
oticon INTIGA User manual
oticon
oticon Own 1 User manual
oticon
oticon BTE 13 with Corda User manual
oticon
oticon minirite Speaker 60 User manual
oticon
oticon ConnectClip User manual
oticon
oticon Oticon Opn 1 miniRITE-T User manual
