OSTBERG RS Owner's manual

RS
INSTALLATION, OPERATION & MAINTENANCE | EN
INSTALLATION, DRIFT & UNDERHÅLL | SE
1270047_utg1_RS_sveng.indd 1 2020-12-21 16:01:58
EN_SE_Manual_RS_1270047u1.pdf 1EN_SE_Manual_RS_1270047u1.pdf 1 2020-12-21 16:10:372020-12-21 16:10:37

1270047_1
2
1270047_utg1_RS_sveng.indd 2 2020-12-21 16:03:23
EN_SE_Manual_RS_1270047u1.pdf 2EN_SE_Manual_RS_1270047u1.pdf 2 2020-12-21 16:11:072020-12-21 16:11:07

INSTALLATION, OPERATION & MAINTENANCE | EN...........4
INSTALLATION, DRIFT & UNDERHÅLL | SE .......................18
1270047_utg1_RS_sveng.indd 3 2020-12-21 16:03:23
EN_SE_Manual_RS_1270047u1.pdf 3EN_SE_Manual_RS_1270047u1.pdf 3 2020-12-21 16:11:072020-12-21 16:11:07

1270047_1
4
The manufacturer cannot be held liable for injury and damage to people or property that are caused
by incorrect installation, start up and/or incorrect use of the product. The warranty will be immediately
invalidated in the event of injury that is caused by failure to follow the instructions.
Installation and commissioning must be performed by a professional in order for the warranty to apply.
Shortcuts:
• Links to product information www.ostberg.com
• Download wiring diagrams and technical data via the links below.
RS AC
RS EC
1270047_utg1_RS_sveng.indd 4 2020-12-21 16:03:23
EN_SE_Manual_RS_1270047u1.pdf 4EN_SE_Manual_RS_1270047u1.pdf 4 2020-12-21 16:11:082020-12-21 16:11:08

1270047_1
EN | Table of Content
5
Table of Content
1 Safety............................................................................................................. 4
1.1 Warnings...................................................................................................................4
1.2 General safety .......................................................................................................... 4
1.3 Declaration of conformity........................................................................................ 5
2 Warranty. ....................................................................................................... 6
2.1 Extent of the warranty ............................................................................................ 6
2.2 General limitations in the warranty ....................................................................... 6
2.3 Limitations in the warranty..................................................................................... 6
2.4 Service conditions during the warranty period..................................................... 6
2.5 Corrective measures in the event of detected faults ............................................ 7
3 Transport and storage .................................................................................. 7
3.1 General...................................................................................................................... 7
3.2 Checking the delivery .............................................................................................. 7
4 Product overview and use............................................................................ 8
4.1 Product description .................................................................................................. 8
4.2 Product label............................................................................................................. 8
5 Installation..................................................................................................... 9
5.1 Mounting principles............................................................................................... 10
5.2 Installation .............................................................................................................. 11
6 Operation .................................................................................................... 12
7 Maintenance................................................................................................ 13
8 Technical data.............................................................................................. 14
8.1 Dimensions. ............................................................................................................ 14
9 Troubleshooting.......................................................................................... 15
1270047_utg1_RS_sveng.indd 5 2020-12-21 16:03:23
EN_SE_Manual_RS_1270047u1.pdf 5EN_SE_Manual_RS_1270047u1.pdf 5 2020-12-21 16:11:082020-12-21 16:11:08

1270047_1
6
EN | Safety
1 Safety
1.1 Warnings
WARNING!
A warning states a risk of personal injury.
CAUTION!
Caution states a risk of damage to equipment.
1.2 General safety
WARNING!
All electrical installations must be performed by a qualified electrician
WARNING!
Ensure that the power cable is not damaged during mounting and installation.
WARNING!
The fan may not be started until the installation is completely finished and the ducts have
been connected.
WARNING!
All operations on the unit and its peripheral equipment must be performed in accordance
with local laws and regulations.
WARNING!
Watch out for sharp edges and corners on the fan.
WARNING!
Rotating, hot and electrical components can cause serious injuries.
WARNING!
The fan is used for transportation of “clean” air, meaning not intended for flammable
substances, explosives, grinding dust, soot, etc.
CAUTION!
The capacitor has finite lifetime and should be exchanged after 45.000 hours of operation
(about 5 years) to secure maximum function. Defective capacitor can cause damage.
1270047_utg1_RS_sveng.indd 6 2020-12-21 16:03:23
EN_SE_Manual_RS_1270047u1.pdf 6EN_SE_Manual_RS_1270047u1.pdf 6 2020-12-21 16:11:082020-12-21 16:11:08

1270047_1
EN | Safety
7
1.3 Declaration of conformity
EU DECLARATION OF CONFORMITY
We hereby confirm that our products comply with the requirements in the following
EU-directives and harmonised standards and regulations.
Manufacturer: H. ÖSTBERGAB
Industrigatan 2
SE-774 35 Avesta, Sweden
Tel No +46 226 860 00
Fax No +46 226 860 05
http://www.ostberg.com
VAT No SE 556301-2201
Products: Duct fans: CK, RK, RKC, RKB, LPKB, LPKBS, IRE, IRB, BFS, BFC
Wall fans: CV, KV, RS
Roof fans: TKK, TKS, TKC, TKV, TKH
Exhaust fans: IFK, IFA, CAU
Supply air units: SAU
This EU declaration is applicable for products including our accessories for mounting and installation only if the
installation is made in accordance with the enclosed installation instructions and that the product has not been modified.
Low Voltage Directive (LVD) 2014/35/EU
Harmonised standards:
xEN 60335-1:2012, AC 1, A 13 R1, A 11, A 12, A 13, A 1, A 14, A2, Household and similar electrical appliances - Part 1:
General requirements
xEN 60335-2-80:2003, A 1, A 2, Household and similar electrical appliances - safety- Part 2: Particular requirements for
fans
xEN 62233:2008 Measurement methods for electromagnetic fields of household appliances and similar apparatus with
regard to human exposure
Directive for Electromagnetic Compatibility (EMC) 2014/30/EU
Harmonised standards:
xSS-EN IEC 61000-6-1:2019 Electromagnetic compatibility (EMC) - Generic standards - Immunity for residential,
commercial and light-industrial environments
xSS-EN IEC 61000-6-2:2019 Electromagnetic compatibility (EMC) - Generic standards - Immunity for industrial
environments
xSS-EN 61000-6-3:2007, A1, Electromagnetic compatibility (EMC) - Generic standards - Emission standard for
residential, commercial and light-industrial environments
xSS-EN IEC 61000-6-4:2019 Electromagnetic compatibility (EMC) - Generic standards - Emission standard for industrial
environments
Machinery Directive (MD) 2006/42/EC
Harmonised standards:
xEN ISO 12100:2010 Safety of machinery - General principles for design – Risk assessment and risk reduction
xEN ISO 13857:2019 Safety of machinery - Safety distances to prevent hazard zones being reached by upper and lower
limbs.
xEN 60204-1:2018 Safety of machinery – Electrical equipment of machines – Part 1: General requirements
Ecodesign Directive 2009/125/EC
Harmonised regulation:
x1253/2014 Ecodesign requirements for ventilation units
x1254/2014 Energy labeling of residential ventilation units (Where applicable)
Standards:
xSS-EN 13141-4, SS-EN 13141-8, SS-EN 13141-11 or EN 13053
RoHS 2011/65/EU,2015/863/EU
Harmonised standards:
xEN IEC 63000:2018
Avesta 2020-11-30 Mikael Östberg
Product Manager
1270047_utg1_RS_sveng.indd 7 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 7EN_SE_Manual_RS_1270047u1.pdf 7 2020-12-21 16:11:082020-12-21 16:11:08

1270047_1
8
EN | Warranty
2 Warranty
The warranty’s validity according to the purchase agreement is calculated from the day of purchase.
2.1 Extent of the warranty
The warranty covers faults that occur during the warranty period that have been notified to the dealer
or which have been verified by H.Östberg AB (underwriter) or the warranty provider’s representative.
Faults are defects in manufacture and materials as well secondary failures that occur due to these.
The above faults must be remedied so that the product is operational.
2.2 General limitations in the warranty
The warranty provider’s liability is limited according to these warranty conditions and the warranty
does not cover injury or damage to people or property. Verbal promises that are made in addition to
the warranty agreement are not binding on the warranty provider.
2.3 Limitations in the warranty
The warranty applies on condition that the product is used in the normal manner or under equivalent
circumstances and that the user instructions are followed.
The warranty does not cover faults that are caused by:
• Transport of the product.
• Unintended use or overloading of the product.
• Failure on the part of the user to follow the instructions regarding installation, use,
maintenance and care.
• Incorrect installation or incorrect positioning of the product.
• Conditions that are not the responsibility of the warranty provider, e.g. excessive variations
in voltage, lightning strike, fire and other accidents.
• Repairs, maintenance and changes that are performed by unauthorised parties.
The warranty does not cover:
• Faults that do not affect operation, for example scratches to the surfaces.
• Parts that are exposed to greater risk of fault than normal due to handling or normal wear
and tear, for example lamps, glass, ceramics, paper or plastic parts, filters and fuses.
• Settings, information on use, care, service or cleaning that are typically described in the user
instructions, or damage that is caused by the user failing to observe warnings or installation
instructions, or inspection of such.
The warranty provider is only responsible for the operation if approved accessories are used. The war-
ranty does not cover product faults that are caused by other manufacturers’ accessories or equipment.
The unit’s current settings must be recorded in the installation and assembly instructions at installation
in order to avoid costs in the event of fault. The warranty provider is not responsible for costs such as
adjustment costs when changing fans and mainboards in the unit.
2.4 Service conditions during the warranty period
The conditions apply according to the agreement with the local dealer.
1270047_utg1_RS_sveng.indd 8 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 8EN_SE_Manual_RS_1270047u1.pdf 8 2020-12-21 16:11:082020-12-21 16:11:08

1270047_1
EN | Transport and storage
9
2.5 Corrective measures in the event of detected faults
If a fault is detected, the customer must notify this to the dealer.
Shipping damage must be notified to the shipping agent upon delivery. State which product applies
(part and serial number as per the name plate) and describe the fault and how this has occurred as
accurately as possible.
In order for warranty repair to be performed, the customer must demonstrate that the warranty is valid
by presenting a purchase receipt. Once the warranty period has expired, claims that were not made
in writing before expiry of the warranty period will not be valid. In other regards, this shall occur in
accordance with the sales conditions.
3 Transport and storage
3.1 General
The fan must be transported in its packing until installation. This prevents transport
damages, scratches and the fan from getting dirty.
The fan must be stored in a protected and dry space before installation.
3.2 Checking the delivery
1. Inspect the unit carefully upon delivery to check for any damage that may have occurred
during transport. Immediately inform the manufacturer in the event of severe damage.
Note! The manufacturer cannot be held liable for damage to the fan during transport,
even if the manufacturer has appointed the shipping agent.
2. Check that the delivery contains all ordered parts.
The following parts will be included in the delivery:
• Manual for installation, operation and maintenance.
3. Contact your dealer if anything is missing.
1270047_utg1_RS_sveng.indd 9 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 9EN_SE_Manual_RS_1270047u1.pdf 9 2020-12-21 16:11:082020-12-21 16:11:08

1270047_1
10
EN | Product overview and use
4 Product overview and use
4.1 Product description
• The RS is an exhaust fans designed for mounting on an outside wall.
• The casings are manufactured from painted galvanized steel for higher durability.
• The fan is equipped with an AC or EC external rotor induction motor with maintenance-free sealed
ball-bearings.
• The fan is used for transportation of “clean” air, meaning not intended for fire-dangerous
substances, explosives, grinding dust, soot, etc.
• All fans are as standard, single phase 230V, 50 Hz and some also 220V, 60 Hz.
• The fan is intended to be used at the highest voltage and frequency that’s stated on the label
on the fan.
4.2 Product label
Example of product label
1 Item number
2 Product name
3 RPM at maximum power
4 Max temperature of transported air
5 Maximum power
6 Current at maximum power
7 Serial number
8 Serial number as bar code
9 QR-code for product web page
1 2
4
5
6
7
8
3
9
1270047_utg1_RS_sveng.indd 10 2020-12-21 16:03:24
EN_SE_Manual_RS_1270047u1.pdf 10EN_SE_Manual_RS_1270047u1.pdf 10 2020-12-21 16:11:082020-12-21 16:11:08
Other manuals for RS
2
This manual suits for next models
7
Table of contents
Languages:
Other OSTBERG Fan manuals

OSTBERG
OSTBERG TKC Manual

OSTBERG
OSTBERG SAU EC Series Programming manual

OSTBERG
OSTBERG CK AC Manual

OSTBERG
OSTBERG TKV Series Manual

OSTBERG
OSTBERG RF User manual

OSTBERG
OSTBERG HERU S AC Series Manual

OSTBERG
OSTBERG CONNECTION BOX 70 K User manual

OSTBERG
OSTBERG CV Manual

OSTBERG
OSTBERG BFS AC Manual

OSTBERG
OSTBERG RKX 500x250 D3 Manual
Popular Fan manuals by other brands

ELTA FANS
ELTA FANS H03VV-F installation guide

Hunter
Hunter 20714 Owner's guide and installation manual

Emerson
Emerson CARRERA VERANDA CF542ORB00 owner's manual

Hunter
Hunter Caraway Owner's guide and installation manual

Panasonic
Panasonic FV-15NLFS1 Service manual

Kompernass
Kompernass KH 1150 operating instructions

























