Orphek Helix 5000 User manual

English

MAINTENANCE

It is recommended to clean the pumps every 3 months. Check and clean the

impeller, and if necessary soak the pump and impeller in white vinegar to

dissolve any calcium deposits.

WARRANTY POLICY

Orphek warrants this product to the original purchaser against defective

material and workmanship that occurs during normal use of the body for

two years and one year warranty on the pump. Company will, at

company’s option, either repair or replace without charge.

PRODUCTS COVERED BY WARRANTY

All Orphek equipment is covered by warranty from the date of purchase.

Exclusions

Damage resulting from accident, misuse, lack of reasonable care,

subjecting the product to abnormal working condition or any other failure

not resulting from defects in materials or workmanship.

Damage caused by tampering, modification or attempted repair by anyone

other than the company.

Transfer of products to someone other than the original purchaser.

ORPHEK AQUARIUM SUPPLIES

E-mail:[email protected]

Http://www.orphek.com

Orphek Helix 5000

INSTALLATION GUIDE

English

Thank you for choosing Orphek skimmer that provides excellent performance

with maximum safety and reliability.

Model Orphek Helix 5000

Foot Print/Height 370*320*/545mm(14.43”x12.48”/21.25”)

Chamber Diameter 220m (8.58”)

Outlet Diameter 50mm(1.95”)

Air Intake Max 2000 lph

Tank Size 300-2500L (75-640 gallons)

Pump DC OP-5000N

Wattage 40 watts at full rpm (4.0 amps)

Maximum Head Pressure 3.5 meters (11.7”)

Skimmer Installation:

1. Install Reaction Chamber and Baseplate with Sunk Screws. Install

Baseplate and Body with hand screws.

2. Insert Connection Pipe into elbow outlet pipe, insert T Pipe into

Connection Pipe before fix Outlet Regulator, connect Elbow Assembly

with T Pipe finally.

3. Fix Body Sealing Ring inside the neck. Stuff Stopper into the draining pipe

of Collection Cup, Insert Collection Cup into Body, covered with Lid.

4. Put Inlet Sealing Ring into Inlet Pipe and fixed with Water Pump. Insert

Inlet Pipe into Body.

5. Connect Silencer and Air Filling Part with pump inlet and Air Tube.

1. www.orphek.com

English

Part Names

1. Lid

2. Collection Cup

3. Stopper

4. Body Sealing Ring

5. Body

6. Hand Screws

7. Sunk Screws

8. Reaction Chamber

9. Baseplate

10. Water Pump

11. Air Filling Part

12. Air Tube

13. Inlet Sealing Ring

14. Inlet Pipe

15. Silencer

16. Outlet Regulator

17. T Pipe

18. Elbow Assembly

19. Connection Pipe

2. www.orphek.com

Other Orphek Swimming Pool Filter manuals

Orphek

Orphek HELIX 5000 User manual

Popular Swimming Pool Filter manuals by other brands

Davey

Davey PoolSweepa FloorCova operating instructions

Jandy

Jandy DEL Series Installation and operation manual

ProMinent

ProMinent DULCODOS Assembly and operating instructions

Hayward

Hayward Perflex owner's manual

TMC Aquarium

TMC Aquarium V2Skim Pro Instructions for installation and use

Swim & Fun

Swim & Fun PRO CLASSIC basic manual

Swim & Fun

Swim & Fun EASY SALT Instructions for use

SMC Networks

SMC Networks SMC20TA-2500 PPM instruction manual

T.I.P.

T.I.P. SPF 180 operating instructions

Waterway

Waterway Clear Water II owner's manual

Steinbach

Steinbach S1 instruction manual

EHEIM

EHEIM 350 instructions

Davey

Davey EcoPure DEP2140 Installation and operating instructions

JUWEL Aquarium

JUWEL Aquarium EccoSkim instruction manual

POLYGROUP LIMITED

POLYGROUP LIMITED SFS600 Filter System with F600C Pump owner's manual

Pentair Pool Products

Pentair Pool Products Filter CFW Series owner's manual

Oase

Oase Skimmer 250 operating instructions

Oase

Oase CrystalSkim 350 operating instructions