Ormesa STANDY 3 Manual

INGLESE - Cod. 22135 - 12/09/2011

STANDY 4

STANDY 3

STANDY 4

STANDY 3

USE AND MAINTENANCE HANDBOOK

STANDING FRAME FOR

THE UPRIGHT POSITION

STANDING FRAME FOR

THE UPRIGHT POSITION

1/33

Thank you for choosing STANDY, from ORMESA s.r.l.

The STANDY combines style and ergonomics without compromising on safety.

ORMESA recommends that you read this manual very carefully to fully understand

its contents. In addition to helping you become familiar with STANDY quickly, it also con-

tains practical tips for making the best use of it safely and keeping it in good working order.

Following the recommendations of this manual will help you achieve the rehabilitative goal

for which this aid was developed.

If, after reading it, you still have questions, contact your retailer, who will be happy to help

you, or call ORMESA directly at +39 0742 22927, send a fax to +39 0742 22637 or send an

e-mail to: [email protected]

Luigi Menichini

2/34

TABLE OF CONTENTS

WARNINGS........................................................................................................................................ 3

GUARANTEE..................................................................................................................................... 4

LABELS AND PLATES ..................................................................................................................... 5

SOME EXAMPLES OF WHAT NOT TO DO WITH STANDY ........................................................... 5

HOW TO MOVE STANDY ........................................................................................................... 6

INITIAL PREPARATION.................................................................................................................... 7

PACKING INFORMATION ........................................................................................................... 7

TECHNICAL CHARACTERISTICS STANDY 3................................................................................. 8

TECHNICAL CHARACTERISTICS STANDY 4................................................................................. 9

HOW TO USE STANDY..................................................................................................................... 10

WHAT DOES STANDY DO ............................................................................................................... 10

HOW STANDY WORKS .................................................................................................................... 11

HOW TO ASSEMBLE STANDY........................................................................................................ 13

Fitting the WORK TABLE and the BACK SUPPORT on STANDY 3 ........................................... 13

Fitting the WORK TRAY and the BACK SUPPORT on STANDY 4 ............................................. 14

HOW TO ADJUST STANDY.............................................................................................................. 15

Adjusting the height of the CHEST SUPPORT on STANDY 3 .................................................... 16

Adjusting the height of the CHEST SUPPORT on STANDY 4 .................................................... 16

Adjusting the height of the HAND SUPPORT RING and BACK SUPPORT on STANDY 3 ........ 17

Adjusting the height of the HAND SUPPORT RING and BACK SUPPORT on STANDY 4 ........ 17

Adjusting the depth of the BACK SUPPORT on STANDY 3 ........................................................ 18

Adjusting the depth of the BACK SUPPORT on STANDY 4 ........................................................ 18

Adjusting the width, height and depth of the KNEEPADS on STANDY 3 and STANDY 4 .......... 19

Adjusting the HEEL STOPS on STANDY 3 and STANDY 4 ........................................................ 20

Adjusting the height of the WORK TABLE on STANDY 3 ........................................................... 21

Adjusting the height of the WORK TRAY on STANDY 4 ............................................................. 21

Adjusting the depth of the WORK TABLE on STANDY 3 ............................................................ 22

Adjusting the depth of the WORK TRAY on STANDY 4 during use ............................................ 22

Opening the BACK SUPPORT on STANDY 3 ............................................................................. 23

Opening the BACK SUPPORT on STANDY 4 ............................................................................. 23

How to remove the HANDLE on STANDY 4 ................................................................................ 24

MOUNTING AND ADJUSTMENT OF ACCESSORIES .................................................................... 25

SIDE SUPPORT 857 on STANDY 3 ............................................................................................ 25

SIDE SUPPORT 857 on STANDY 4 ............................................................................................ 26

4–WHEEL SET 861 on STANDY 3 .............................................................................................. 27

4-WHEEL SET 861 on STANDY 4 ............................................................................................... 28

HEADREST 865 on STANDY 3 ................................................................................................... 29

HEADREST 865 on STANDY 4 ................................................................................................... 30

FRONT FOOT RESTRAINTS with BELTS 902 on STANDY 3 .................................................... 31

FRONT FOOT RESTRAINTS with BELTS 902 on STANDY 4 .................................................... 32

MAINTENANCE AND CLEANING .................................................................................................... 33

CUSTOMER SERVICE AND SPARE PARTS. REUSE .................................................................... 34

3/34

WARNINGS

- Carefully read and understand the instructions in this manual before using the de-

vice because they have been written with the user's safety in mind and they will help

the carer use the product safely and keep it in good working order. The Use and Mainte-

nance Manual is an integral part of the product and must be carefully preserved for future

reference.

- The manual is intended for technically qualified retailers and for users and their

assistants; it provides instructions for usi ng the pro duct correctly a nd must be sup ple-

mented by adequate knowledge of th e rehabilitation program for which it has been pre-

scribed.

The manual reflects the technical state of the product at the time it was sold.

ORMESA reserves the right to make any changes to the product or manual suggested by

experience, technical considerations or regulatory developments without any obligation to

update its previous production and relevant manuals.

- STANDY must be prescribed by a medical specialist who will also supervise its use.

- The product must onl y be used by persons whose bodily measurements and weight

conform to the specificati ons in the paragraph “T ECHNICAL C HARACTERISTICS” on

pages 8 and 9.

- STANDY must be used with the assistance and constant presence of qualified per-

sonnel or a family member.

- ATTENTION! Make sure that all adjustable parts have been locked before each use.

- T o make adjustments while the product is in use, follow the instructions in section

“HOW TO ADJUST STANDY” on pages 15 and following of the manual.

- ATTENTION! The product is not fireproof, so keep ST ANDY far fro m flames, cig a-

rettes or fires.

- Clea n STANDY follo wing th e instructi ons shown in the “ MAINTENANCE” section (s ee

page 33).

PRODUCT REPAIRS OR MODIFICATIONS other than the regular maintenance

shown on pages 33-34 of the manual MUST ONLY BE MADE BY ORMESA S.R.L.

OR AN AUTHORIZED SERVICE CENTRE, OR THE WARRANTY AND MARKING

WILL BE VOIDED

- STANDY IS NOT DESIGNED FOR USE OUTDOORS except on flat, paved surfaces

protected from bad weather

Perform regular maintenance and cleaning following the instructions shown in

the "Maintenance" chapter on pages 33-34 and have the device inspected at the

intervals indicated to verify that it is working properly and in good condition,

such as, for example, the absence of scraped paint or worn brakes, failing the warranty

and marking will lapse

4/34

GUARANTEE

ORMESA warrants the STANY 3/4 standers for 2 years.

In case of problems, contact the retailer where you purchased it.

ORMESA will not be liable for damage in the following cases:

- use by an unsuitable person;

- incorrect assembly of parts or accessories;

- unauthorized modifications or service;

- use of other than original replacement parts and parts subject to wear (upholstery, wheels, etc);

- improper use (such as, transporting objects or loads larger or heavier than those shown in the

instruction manual);

- damage caused by incorrect use and lack of regular maintenance, as shown in the instruction

manual;

- exceptional events;

- failure to follow the instructions in this manual.

THE GUARANTEE DOES NOT COVER WEAR PARTS, which are subject to wear and tear, such

as the upholsteries and the wheels.

HOW TO STORE AND TRANSPORT THE MEDICAL DEVICE

TO AND TRANSPORT THE MEDICAL DEVICE

THE DEVICE MUST BE STORED AND PACKED using the Ormesa original pack-

aging materials, unless the guarantee will be voided

-Once unpacked, THE TRANSPORT OF THE DEVICE must be done by

ANCHORING ADEQUATELY it to the vehicle

-When travelling by plane, or in the car, DO NOT SUBJECT THE FOLDED FRAME

TO LOADS THAT, especially with road bumps, COULD DAMAGE ITS

STRUCTURE

THE DEVICE MUST BE PARKED / STORED IN CLOSED AND DRY PLACES

-THE OPERATING ENVIRONMENT HAS NO PARTICULAR INFLUENCE ON THE

DEVICE UNLESS IT IS USED INCORRECTLY, such as by leaving it parked for a

long time in direct sunlight or exposed to bad weather such as rain, or in

MARINE ENVIRONMENTS, where the salt air could corrode the paint and sliding

parts. IN THIS CASE, WE RECOMMEND CAREFULLY CLEANING AND DRYING

THE FRAME FOLLOWING THE INSTRUCTIONS SHOWN IN THE “MAINTENANCE,

CLEANING AND DISINFECTION” CHAPTER ON PAGES 33-34 AND THE

WARNINGS ON PAGE 33

5/34

LABELS AND PLATES

THE MARK CERTIFIES THAT THE BUG SEAT WITH BASES 856, 869 AND 901

CONFORMS TO THE SAFETY REQUIREMENTS OF THE EUROPEAN UNION AND, IN

PARTICULAR, TO THE 2007/47/EC DIRECTIVE ON “MEDICAL DEVICES”

SOME EXAMPLES OF WHAT NOT TO DO WITH STANDY

-DO NOT USE THE PRODUCT WITH PERSONS LARGER OR SMALLER THAN THE

DIMENSIONS SHOWN ON PAGES 8 and 9. STANDY must be prescribed by a medi-

cal specialist in conformity with the laws and standards in force

-DO NOT PLACE THE STANDER ON A SLOPING SURFACE OR NEAR STAIRS

-Do not lift the stander to move it WHEN THE PERSON IS USING IT

-DO NOT REST EXCESSIVELY HOT CONTAINERS OR OBJECTS ON THE TRAY

SURFACE BECAUSE THEY COULD TIP OVER and because the wood or covering

could be seriously damaged

-DO NOT ALLOW OTHER PEOPLE TO USE THE PRODUCT, NOT EVEN FOR

PLAYING

-NEVER LEAVE THE USER UNATTENDED OR NEAR OPEN FLAME OR STAIRS

-NEVER LEAVE STANDY PARKED FOR A LONG TIME IN DIRECT SUNLIGHT OR

NEAR SOURCES OF HEAT: THIS WILL AVOID OVERHEATING THE DEVICE AND

DISCOLOURING THE UPHOLSTERY

DO NOT USE THE PRODUCT WITH MISSING OR DAMAGED PARTS or the warranty

and mark will be voided DO NOT CARRY THE CHILD OVER ROUGH OR STEEP

SURFACES OR STAIRS

Series number Article number

Max load

Date of

production

Warning! Read the

useand maintenance

handbook before use

Conformity with the

European safety

standards

LOT code

s.r.l.

Via A. Da Sangallo, 1 06034 Foligno (PG) ITALY Tel. +39 074222927 Fax +39 074222637

MODEL. PART N°

S N

LOT MAX. KG

Name of the model

6/34

HOW TO MOVE STANDY

ATTENTION!

IT CAN TIP OVER IF TILTED MORE THAN 20°

STANDY 3

STANDY 4

fig. A

7/34

INITIAL PREPARATION

PACKING INFORMATION

Stander A

cm B

VOLUME

m³ WEIGHT

STANDY 3 80 80 84 0.537 33

STANDY 4 85 80 93 0.632 42

ATTENTION!

CUT WITHOUT PRESSING TOO

HARD SO AS NOT TO DAMAGE

THE CONTENTS OF THE BOX

REMOVE STANDY

FROM THE BOX

WITHOUT DRAGGING

REMOVING STANDY FROM THE BOX

Other manuals for STANDY 3

This manual suits for next models

Table of contents

Other Ormesa Mobility Aid manuals

Ormesa

Ormesa BUG Manual

Ormesa

Ormesa Grillo Manual

Ormesa

Ormesa Trolli Manual

Ormesa

Ormesa Grillo Manual

Ormesa

Ormesa Grillo Front-drive gait trainer Manual

Ormesa

Ormesa DYNAMICO 1 Manual

Ormesa

Ormesa Bug 869 Manual

Ormesa

Ormesa BUG User manual

Ormesa

Ormesa Grillo Manual

Popular Mobility Aid manuals by other brands

Alber

Alber Scalamobil iQ operating instructions

Ferno

Ferno CCT-PX user manual

HEPRO

HEPRO Gripo user manual

Otto Bock

Otto Bock Pheon 3R62 Instructions for use

NRS Healthcare

NRS Healthcare M11090 User instructions

Medline

Medline MDS86835DSHEC User Instructions & Warranty

Guldmann

Guldmann Twin Turner II user manual

Drive

Drive ROOMBA Operation manual

Gate

Gate Balder operating instructions

Decon wheel

Decon wheel TNS Notos Assembly instructions

ExoAtlet

ExoAtlet ExoAtlet-II user manual

Invacare

Invacare Storm Series parts catalog

Rhythm Healthcare

Rhythm Healthcare B3800F manual

AMF-BRUNS

AMF-BRUNS PROTEKTOR installation manual

Drive DeVilbiss Healthcare

Drive DeVilbiss Healthcare OTTER Instructions for use

Rhythm Healthcare

Rhythm Healthcare C500U Assembly and Fitting Instructions

Lumex

Lumex RJ4200A manual

Rebotec

Rebotec Jumbo user manual