Orava S-500 BT User manual
Bluetooth stereo headphones
S-500 BT
Instruction manual EN
The intended use of the device
• The device is intended solely for the personal listening of audio files to the
extent specified by the technical and operating parameters and functions,
safety and user instructions and external influences of the operating
environment.
• ORAVA electrical appliances are manufactured in accordance with the
state of the art and recognized safety-technical rules. Nevertheless,
the use or use contrary to designation may result in the risk of injury or
endanger the life of the user or third person, damage to the device and
other material values.
Special Safety Instructions.
Read carefully!
• Electrical equipment is designed and manufactured in such a way as
to allow for safe operation and use by persons without a professional
qualification. Despite all the measures taken by the manufacturer to
ensure safe use, handling and use, it carries with it some residual risks
and associated potential hazards.
• The following symbols and their meanings have been used on the device
and in the accompanying documentation to warn of possible hazards:
This symbol alerts users that the following precautions can be
avoided if the following precautions are observed when operating
and operating the device:
Danger of serious injury or life threatening! Danger of damage to
equipment or other damage to property!
This symbol alerts users:
Avoid listening at high volume for a long time! Using headphones
or earphones at high volume for a long time can damage your
hearing. If you have a long-term exposure of more than 85 dB,
your hearing may be adversely affected.
The volume above 85 decibels for eight hours or 100 decibels for
15 minutes is a hazard.
The manufacturer recommends that you do not set the volume
level of the device higher than the middle level of the setting
range.
This symbol means that the product is made with a double
insulation between hazardous parts (parts with dangerous
voltage from the supply network) and parts that are accessible in
normal use.
When charging a built-in battery with a power adapter, use only
accessories that are safe.
Transportation/Transfer
• When transferring and transporting, be careful when moving, to prevent
overturning, falling and damage to the device.
There is a risk of damage to the device!
Unpacking/Packaging
• Zariadenie a príslušenstvo pred jeho uvedením do prevádzky vybaľte a
zbavte všetky jeho časti zvyškov obalových materiálov, etikiet a štítkov.
• Obalové materiály odložte na bezpečné miesto alebo uschovajte
predovšetkým mimo dosahu detí a nespôsobilých osôb.
Hrozí nebezpečenstvo vážneho zranenia!
Hrozí nebezpečenstvo zadusenia!
Check/Commissioning
• We recommend performing both initial and subsequent regular machine
inspections. Only use the device with accessories supplied and approved
by the manufacturer.
• Never use the appliance if it is incomplete, damaged, or if parts or
accessories (eg due to fall) have been damaged during use.
There is a risk of serious injury!
• Check and assemble the device before operating it as described in “Before
Use”.
• Never clean the device (body with electrical parts) in a way that it could
get into the liquid and flood the liquid into the device.
• Clean the electrical parts with a damp cloth only and wipe dry or let it dry.
Keep the device clean and dry.
Warning!
• If the device has been stored at lower temperatures, first acclimate it
(about ½ to 1 hour) before further use to remove any moisture inside the
enclosure, solidify the moving parts and preserve the mechanical strength
of the plastic parts.
Operation / Use
Warning!
• This device may only be used with original and non-
damaged parts and accessories. For the suitability and
proper use, read the section “Use”.
There is a risk of serious damage to health!
Warning!
• Keep the device dry.
• Do not use or place the appliance near water
containers. If the appliance falls into the water, turn it off
and allow the appliance to dry completely.
• If the device subsequently shows signs of malfunction
or damage, take it to a specialist garage for inspection.
• Never overload the equipment beyond the limits
specified by the technical specifications!
• Do not expose the device to:
- direct sunlight, sources of excessive heat,
- vibration and mechanical stress,
- polluting chemicals,
- water and excess moisture,
- insects, plants,
- aggressive environmental influences.
There is a risk of serious injury!
There is a risk of damage to equipment or other
property damage!
• Observe the operating mode of the device (operating
time/operation and breaks) in accordance with the
operating and operating instructions. Clean the device
regularly.
Pollution of the device may result in a decrease
in operating parameters and possible subsequent
irreversible damage.
• If any safety component/component (mechanical,
electrical) is part of the unit, never disable this part/
component! If the safety component/part is damaged or
not working, do not use the appliance!
Safety of the operating environment
• Do not use the device in an industrial environment or outside environment.
• Always keep the operating environment clean and well lit.
• Do not place the device on an unstable surface. Overriding or dropping the
device may result in personal injury or damage to the device.
• Do not expose the appliance to:
- electromagnetic fields,
- direct sunlight, sources and equipment producing excessive heat
- fall, vibration and mechanical stress,
- excessive dust,
- water and excess moisture,
- insect,
- aggressive effects of the external environment.
• Exposing the device to the above effects may result in adverse effects or
irreversible damage.
• The operating environment of the device must always be in accordance
with the basic characteristics set.
• Do not use an electric appliance in areas with flammable liquids, gases or
dust. The appliance may be the source of scaling, which may result in the
ignition of dust or vapors.
Features of the operating environment
1. Ambient temperature: +5 - +40 ° C
2. Humidity: 5 - 85%
3. Altitude: <2000m
4. Occurrence of water: occasional condensation of water or occurrence of
water vapor
5. Existence of foreign bodies: quantity and type of dust are not significant
Electrical safety
• Class II electrical equipment is equipped with a protection against electric
shock by double insulation or enhanced insulation of hazardous live
electrical parts. Protection class device II must not be equipped with
means for connecting a protective earth.
• Class III electrical appliances are such devices that are powered by a low
voltage (battery or accumulator) source, and do not pose any danger to
the user from the point of view of electrical shock.
Bluetooth technology
Warning!
• Microwave radiation from a Bluetooth device may have a negative impact
on the proper operation of electronic medical devices. Switch off this
Bluetooth device at the following locations, as this may present a risk of
danger:
near flammable gases, hospitals, trains, aircraft or service stations; near
automatic doors or fire alarms.
• Be careful when communicating using Bluetooth wireless technology.
• We are not responsible for the leak of Bluetooth communication
information.
• To ensure compliance with the Bluetooth standards specified by the
Bluetooth SIG and authentication, you need a Bluetooth-enabled device.
• Although the connected device complies with the Bluetooth standard,
some devices may not be able to connect or function properly, depending
on the features or specifications of the device.
Inserted battery notifications
• If the headset is powered by a rechargeable battery, charge it only with
suitable rechargeable chargers designed for these headphones.
• If you do not own the charger, the battery is charging while connected to
the PC via the supplied USB cable.
• When you are not using the charger, disconnect the charger from the
mains and the headphones.
• Do not leave a fully charged battery connected to the charger, as
overcharging may shorten its life.
• If you do not use a fully charged battery, it will self-discharge.
• Never use a damaged charger.
• Battery capacity and battery life will be reduced if you leave the headset in
hot or cold places, such as a closed car in summer or winter.
• Always keep the battery in an environment with a temperature between 15
°C and 25 °C.
• Battery performance is particularly limited at temperatures below freezing.
• The rechargeable battery is located inside the headphones and is not
accessible to the customer.
• Do not throw unnecessary batteries into the fire - they could explode.
• The battery can explode even when damaged.
Cleaning the headphones and their accessories
• When using and cleaning the headphones, observe the following
procedure and instructions:
- Keep the headphones dry. Precipitation, humidity, and various fluids and
condensates contain minerals that cause corrosion of electronic circuits.
When the headphones are closed, allow them to dry completely.
- Do not use or store the headphones in a dusty and dirty environment. It
may shorten the life of electronic circuits, damage to the battery and the
deformation or melting of some plastics.
- Do not store the headphones in a cool environment. When the
headphones are warmed to the operating temperature, condensation can
occur inside them and damage the electronic circuits.
- Do not attempt to open the headphones.
- Do not let the headphones fall, do not bother and do not mess with
them. By rough handling you can damage internal circuits and delicate
mechanics.
- Do not color the headphones. Color can wear moving parts and prevent
proper operation.
Warning!
• Listening with a device at high volume may damage your hearing. For
reasons of road safety, do not use the device while driving or cycling.
There is a risk of serious injury!
• Never underestimate the potential hazards and take extreme caution!!!
Introduction
Stereo Bluetooth Headset lets you wirelessly listen to music from your
compatible audio / phone and connected
with a compatible mobile phone, also make calls and receive calls in
handsfree mode.
The player can be the function of the audio player of your mobile phone,
tablet or laptop or a separate music player. You can use the headset with
compatible devices that support Bluetooth wireless technology.
You can also use the headphones as standard headphones after connecting
them to the audio output jack on the source device with the supplied mini
jack (3.5 mm) jack cable.
Be sure to read this manual carefully before using the headphones. Also
read the instructions for your mobile phone (tablet, other Bluetooth device)
that contains important safety information
and maintenance.
Keep the headphones and their accessories out of the reach of small
children.
Power sources
Power from built-in rechargeable battery
The device is powered by a built-in rechargeable battery.
Before first use or whenever the battery is weak (the red LED blinks every
5 seconds, the beeps sound every 5 minutes, or the headset switches off
completely), charge the battery. You can charge your device from a power
source with a suitable charger that has a microUSB connector.
Connect the charger to a power socket and connect the microUSB
connector to the microUSB connector on the headphones.
If you do not own a suitable charger, you can charge the battery by
connecting the headphones to the PC with the supplied USB cable. When
connected, the battery will be charged in the headphones from the PC.
During charging, the red LED lights up. When the indicator goes off, the
battery is fully charged.
Description of parts and controls
A u button (On/Off/Play/Pause/Answer/End call / Last number call)
B M/+ button (Forward/Volume up)
C m/- button (Rewind/Volume Down)
D LED indicator (Headphone status/battery/charging status)
E Microphone
F MicroUSB connector
(Connecting the charger/connecting from the USB connector of the PC for
charging)
G 3.5 mm AUDIO IN connector (Connecting external audio devices)
H Slot for microSD card
General Operations
Turn on your device
To turn on the device, press and hold u for 2 seconds. The bluetooth LED
lights up for 1 second and the device is turned on. To enable the pairing
mode, turn the machine off from the off state by pressing and holding the
u button for 2 seconds.
Once the unit is turned on, a “Pairing” sound will sound and the bluetooth
and red LED will flash alternately (pairing preparation).
The device always switches to Bluetooth mode (default setting).
Turn off the device
To turn off the device, press and hold the u button for 2 seconds. The LED
turns off when the device is turned off.
When you turn it on again, the device always switches to Bluetooth mode
(default), regardless of the shutdown mode.
Inserting earphones
Place the earphones on your ears so that your ear shells comfortably sit on
your ears. L Place a letter marked L with your left ear and a shell marked
with the letter R on your right ear.
Caution!
When using headphones, your ability to perceive ambient sounds is
reduced. Do not use headphones where there is danger.
Table of contents
Other Orava Headphones manuals
