Optoma S316 User manual
1English
Table of Contents ............................1
Usage Notice...................................2
Safety Information...............................2
Precautions.........................................3
Eye Safety Warnings ..........................5
Product Features ................................5
Introduction......................................6
Package Overview..............................6
Product Overview ...............................7
Main Unit.............................................. 7
Control Panel ....................................... 8
Input/Output Connections .................... 9
Remote Control.................................. 10
Installation ..................................... 11
Connecting the Projector ..................11
Connect to Computer/Notebook ........ 11
Connect to Video Sources ................. 12
Powering the Projector On / Off........13
Powering On the Projector................. 13
Powering off the projector.................. 14
Warning Indicator............................... 14
Adjusting the Projected Image..........15
Adjusting the Projector’s Height ........ 15
Adjusting the Projector’s Zoom /
Focus ................................................. 16
Adjusting Projection Image Size ........ 16
User Controls ................................18
Control Panel & Remote Control ......18
Control Panel ..................................... 18
Remote Control Battery Installation ... 19
Remote Control.................................. 20
On-screen Display Menus ................24
How to operate .................................. 24
Menu Tree.......................................... 25
IMAGE ............................................... 27
IMAGE | Advanced ............................ 29
IMAGE | Advanced | Signal (RGB) ... 31
DISPLAY............................................ 32
DISPLAY | 3D ................................... 35
SETUP............................................... 36
SETUP | Security ............................... 38
SETUP | Audio Settings..................... 40
SETUP | Advanced ............................ 41
OPTIONS........................................... 42
OPTIONS | Advanced........................ 44
OPTIONS | Lamp Settings................. 45
OPTIONS | Optional Filter Settings ... 46
Appendices....................................47
Troubleshooting ................................47
Replacing the Lamp..........................53
Installing and Cleaning the
Dust Filter .........................................55
Compatibility Modes .........................56
Computer/Video/HDMI/Mac
Compatibility ...................................... 56
3D Input Video Compatibility ............. 57
RS232 Commands and Protocol
Function List .....................................58
RS232 Pin Assignments .................... 58
RS232 Protocol Function List ............ 59
Ceiling Mount Installation..................63
Optoma Global Ofces .....................64
Regulation & Safety Notices .............66
Table of Contents
2
English
Usage Notice
Safety Information
The lightning ash with arrow head within an equilateral triangle is
intended to alert the user to the presence of uninsulated “dangerous
voltage” within the product’s enclosure that may be of sufcient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH
VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE
CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
Class B emissions limits
This Class B digital apparatus meets all requirements of the Canadian
Interference-Causing Equipment Regulations.
Important Safety Instruction
1. Do not block any ventilation openings. To ensure reliable operation of
the projector and to protect from over heating, it is recommended to
install the projector in a location that does not block ventilation. As an
example, do not place the projector on a crowded coffee table, sofa,
bed, etc. Do not put the projector in an enclosure such as a book case
or a cabinet that restricts air ow.
2. Do not use the projector near water or moisture. To reduce the risk
of re and/or electric shock, do not expose the projector to rain or
moisture.
3. Do not install near heat sources such as radiators, heaters, stoves or
any other apparatus such as ampliers that emits heat.
4. Clean only with dry cloth.
5. Only use attachments/accessories specied by the manufacturer.
6. Do not use the unit if it has been physically damaged or abused.
Physical damage/abuse would be (but not limited to):
Unit has been dropped.
Power supply cord or plug has been damaged.
Liquid has been spilled on to the projector.
Projector has been exposed to rain or moisture.
Something has fallen in the projector or something is loose inside.
Do not attempt to service the unit yourself. Opening or removing covers
may expose you to dangerous voltages or other hazards. Please call
Optoma before you send the unit for repair.
7. Do not let objects or liquids enter the projector. They may touch
dangerous voltage points and short out parts that could result in re or
electric shock.
8. See projector enclosure for safety related markings.
9. The unit should only be repaired by appropriate service personnel.
3English
Usage Notice
Precautions
Please follow all warnings, precautions and
maintenance as recommended in this user’s
guide.
▀■Warning- Do not look into the projector’s lens when the lamp is
on. The bright light may hurt and damage your eyes.
▀■Warning- To reduce the risk of re or electric shock, do not
expose this projector to rain or moisture.
▀■Warning- Please do not open or disassemble the projector as
this may cause electric shock.
▀■Warning- When replacing the lamp, please allow the unit to
cool down. Follow instructions as described on pages
53-54.
▀■Warning- This projector will detect the life of the lamp itself.
Please be sure to change the lamp when it shows
warning messages.
▀■Warning- Reset the “Lamp Reset” function from the on-screen
display “OPTIONS | Lamp Settings” menu after
replacing the lamp module (refer to page 45).
▀■Warning- When switching the projector off, please ensure
the cooling cycle has been completed before
disconnecting power. Allow 90 seconds for the
projector to cool down.
▀■Warning- Do not use lens cap when projector is in operation.
▀■Warning- When the lamp is approaching the end of its lifetime,
the message “Lamp Warning: Lamp life exceeded.”
will show on the screen. Please contact your local
reseller or service center to change the lamp as soon
as possible.
When the lamp
reaches the end
of its life, the pro-
jector will not turn
back on until the
lamp module has
been replaced.
To replace the
lamp, follow the
procedures listed
under “Replacing
the Lamp” section
on pages 53-54.
4
English
Usage Notice
Do:
Turn off and unplug the power plug from the AC outlet before
cleaning the product.
Use a soft dry cloth with mild detergent to clean the display
housing.
Disconnect the power plug from AC outlet if the product is
not being used for a long period of time.
Do not:
Block the slots and openings on the unit provided for
ventilation.
Use abrasive cleaners, waxes or solvents to clean the unit.
Use under the following conditions:
- In extremely hot, cold or humid environments.
Ensure that the ambient room temperature is within
5 - 40°C.
Relative Humidity is 5 - 40°C, 80% (Max.),
non-condensing.
- In areas susceptible to excessive dust and dirt.
- Near any appliance generating a strong magnetic eld.
- In direct sunlight.
5English
Usage Notice
Eye Safety Warnings
▀■Avoid staring/facing directly into the projector beam at all
times. Keep your back to the beam as much as possible.
▀■When projector is used in a classroom, adequately supervise
students when they are asked to point out something on the
screen.
▀■In order to minimize the lamp power, use room blinds to
reduce ambient light levels.
Product Features
▀■SVGA (800x600) / XGA (1024x768) / WXGA
(1280X800) Native resolution
▀■HD compatible – 720p and 1080p supported
▀■BrilliantColorTM Technology
▀■Kensington Lock
▀■RS232 control
▀■Rapid shutdown
▀■Full 3D(*) (See page 57)
▀■The Product Features shall be congured by the manu-
facturer as per practical conditions.
(*) For models with
HDMI Input.
Product features may
vary depending on
model.
6
English
Introduction
Documentation :
User’s Manual
Warranty Card
Quick Start Card
WEEE Card
(for EMEA only)
Due to different
applications in
each Country,
some regions
may have
different
accessories.
Power Cord
IR Remote Control
Package Overview
Unpack and inspect the box contents to ensure
all parts listed below are in the box. If something
is missing, please contact your nearest customer
service center.
Battery
Projector VGA Cable(*)
VGA
Ent er
Menu Zoom
Carrying case(*)
CR2025
3V
(*) The acces-
sory depends on
model’s specica-
tions.
7English
Introduction
Product Overview
Main Unit
Focus Ring1.
Zoom Lever2.
IR Receiver3.
Control Panel4.
Input / Output Connections5.
Kensington6. TM Lock Port
Ventilation (inlet)7.
Speaker8.
Lens Cap9.
Tilt-Adjustment Feet10.
Ventilation (outlet)11.
1
9
The interface
is subject to
model’s speci-
cations.
Do not block
projector in/out
air vents.
7
11
5
21
3
10
8
4
6
8
English
Introduction
6
1 2
78
11
Source1.
Keystone Correction2.
Enter3.
Re-Sync4.
Help5.
Four Directional Select Keys6.
Temp LED7.
Power8.
On/Standby LED 9.
Lamp LED 10.
Menu11.
Control Panel
5
10
3 4
9
9English
Introduction
USB VGA1-IN/YPbPr/
VIDEO
VGA-OUT
VGA2-IN/YPbPr
HDMI
AUDIO1-IN
AUDIO-OUT AUDIO2-IN S-VIDEO
RS-232C
Input/Output Connections
Composite Video Input Connector1.
S-Video Input Connector2.
VGA-Out Connector (Monitor Loop-through Output)3.
VGA2-IN/YPbPr Connector 4.
(PC Analog Signal/Component Video Input/HDTV/YPbPr)
VGA1-IN/YPbPr/5. Connector
(PC Analog Signal/Component Video Input/HDTV/YPbPr/
Wireless function via VGA Dongle)
HDMI Connector6. (*)
Security Lock Slot7.
Audio2 Input8. Connector (3.5mm mini jack)
Audio Output Connector ( 3.5mm mini jack)9.
Audio1 Input Connector (3.5mm mini jack)10.
RS-232 Connector (9-pin)11.
USB Connector (Connect to PC for Remote Mouse func-12.
tion/USB Service for rmware upgrade)
Power Socket13.
Monitor loop
through only sup-
port in VGA1-IN/
YPbPr.
The interface is
subject to model’s
specications.
VGA dongle is a
optional accesso-
ry. Please contact
Optoma service
for details.
(*) for optional.
Remote mouse
requires special
remote.
7 9 10 11 12 138
2 3 4 51 6
10
English
Introduction
Remote Control
The interface is
subject to model’s
specications.
Source1.
Re-Sync2.
Video and S-Video3.
HDMI4.
3D5.
Volume +/-6.
Four Directional Select7.
Keys
Menu8.
AV Mute9.
Mute10.
IR LED Indicator11.
Power On/Off12.
VGA13.
Keystone +/-14.
Aspect15.
Enter16.
Zoom17.
Brightness Mode18.
VGA
Enter
Menu Zoom
3
V
O
L
T
S
CR2025
Before using the
remote control
for the rst time,
remove the trans-
parent insulation
tape. See page
19 for battery
installation.
12
13
15
14
7
10
9
8
4
5
3
2
1
11
66
17
16
18
14
Other manuals for S316
1
This manual suits for next models
1
Table of contents
Other Optoma Projector manuals
Optoma
Optoma EX612 User manual
Optoma
Optoma TW766W User manual
Optoma
Optoma ZU606Te User manual
Optoma
Optoma HD25 User manual
Optoma
Optoma HD71 Technical manual
Optoma
Optoma OMA-S User manual
Optoma
Optoma H57 User manual
Optoma
Optoma DS329 User manual
Optoma
Optoma Pico PK301+ User manual
Optoma
Optoma DX346 User manual
Optoma
Optoma EH7700 Installation guide
Optoma
Optoma X351 User manual
Optoma
Optoma W307USTi User manual
Optoma
Optoma HD83 User manual
Optoma
Optoma ZH350 User manual
Optoma
Optoma GT760 User manual
Optoma
Optoma HD50 User manual
Optoma
Optoma TH1060P Technical manual
Optoma
Optoma TS526 User manual
Optoma
Optoma W320ust User manual
