②. Wireless Basic Settings
SSID:Wireless LAN status authentication name ,User can access the wireless networking through status
authentication name only.
Channel:Choose a channel which few users use, it is clear and better. Can use Intelligent Analysis to choose the best
channel.
Key: Wi-Fi password, default password is :66666666
b).PPPOE(ADSL)
If your access type is PPPoE, with ADSL virtual dialing, you need to fill in following details:
User Name: Fill in ADSL access user name which supply by ISP, if you not sure can check with ISP.
Password: Fill in ADSL access password which supply by ISP, if you not sure can check with ISP.
2) Repeater Mode configuration
A. Login the Web management page, click “Repeater Mode”, then “Scan AP”
P8 CPE Station Mode configuration
B. Click “Scan AP”, pop up the picture of P9, Take WirelessAP 2 as example, choose wirelessAP 2 and click “Select
AP” after “Refresh”
