Optika OPTIKAM PRO HDMI User manual
Version: 1
Issued: 18, 03, 2014
Model
OPTIKAM PRO HDMI
High-performance Full HD HDMI camera
INSTRUCTION MANUAL
Page 2
Table of Contents
Package Contents.
Installation of camera drivers and software.
Some notes.
How to test your Camera.
Select the right driver.
Getting started with Optika Vision Lite, a very easy measuring and documentation software.
Getting started with optika IsView, a complete software for measuring, adjusting, capturing images and
video clip.
HDMI user guide .
MENU button.
Equipment disposal.
Page 3
Package Contents
DESCRIPTION QUANTITY
HDMI Camera 1
12V 2000mA power supply 1
MicroSD card 1
MicroSD card Reader 1
USB cable 1
HDMI cable 1
Calibration slide 1
CD 1
Page 4
Installation of camera drivers and software
1. Operating system requirements: all the Windows O.S.
2. Please insert your CD and run:
\optika vision lite\ setup.exe
3. Now the Optika Vision Lite icon appears on your desktop.
4. Please Run
\optika IsView\ setup.exe
5. Now the Optika IsView icon appear on your desktop
6. You don’t need to install any driver.
7. PlugtheCamerainyourPC:thecamerawillbeidentiedautomatically.
Some notes
Often a PC has some ports on the front and some on the back: the ports on the back are usually faster. We suggest to use
these ones.
If you connect the camera into another USB port, Windows needs to recognize its Driver again even if it has alredy done this
operation for the first USB port.
It may happen sometimes that Windows doesn’t recognize a Camera using one of your PC USB ports, while gives no prob-
lem using another port.
How to test your Camera
In order to check if your Camera works correctly, it’s not necessary to put it into the microscope: it’s enough to connect it into
the USB port, run Vision Lite using the icon on your desktop, select the right driver and check whether the shown image is
not totally black.
Select the right driver
Please select: USB CAMERA.
With Optika Vision Lite you have to tell the Software which is the Driver by selecting the microscope-shaped icon. With Optika
IsView the live image coming from your camera will automatically appear.
Page 5
Getting started with Optika Vision Lite, a very easy measuring and documentation
software.
Run Optika Vision Lite by clicking on its icon on your desktop.
Select the right Driver for capturing the image. Note that after choosing the driver and before capturing the image you can
set the brightness, saturation, gamma ecc..
Then you can capture the image.
The image is now ready for being manipulated using Optika Vision Lite.
Getting started with optika IsView, a complete software for measuring, adjusting,
capturing images and video clip.
Run Optika IsView by clicking on your desktop.
The live image with easy buttons for set your camera live view will automatically appear.
HDMI user guide
ON/OFF (Zoom In) MENU
WB/MANUAL AWB (Zoom Out) CONFIRM/CAPTURE
Page 6
The button is used to set the White Balance, it can also be used as a LEFT arrow when you are in the MENU.
The button is used to confirm your choice, to save a still image into the MicroSD card or to save a Video Clip,
it can also be used as a RIGHT arrow when you are in the MENU.
The button is used as a Zoom IN, it can also be used as a UP arrow when you are in the MENU.
The button is used as a Zoom OUT, it can also be used as a DOWN arrow when you are in the MENU.
The button is used to activate the MENU that can be shown on the HDMI Screen only.
ON/OFF button: Press and hold for 2 seconds to switch on/off your HDMI.
Zoom In/Out button
Zoom In: Long press continuously to zoom in the current preview image.
The max magnification is 10, the step is 0.1.
Zoom Out: Long press continuously to zoom out the current preview image.
Page 7
MENU button
Display set
1. Press MENU button to go to menu panel like below picture.
2. Select DISPLAY SET and press MENU button to enter DISPLAY SET,
the corresponding menu will be shown as below,
3. Press UP or DOWN button to move up/down to select the parameter, press LEFT or RIGHT to adjust the value of this
parameter.
The default set and range of parameters in DISPLAY SET are:
Contrast: 8 Ranges from 0 to 15;
Sharpness: 2 Ranges from 0 to 15;
Saturation: 6 Ranges from 0 to 15;
Brightness: 12 Ranges from 0 to 15;
Gamma: 2 Ranges from 0 to 3;
4. Select BACK to save the adjustment and press MENU button to exit DISPLAY SET back to main menu.
Page 8
Camera Set
1. Select CAMERA SET and press MENU button to enter Camera set menu as below picture show.
2. Select EXPOSURE and press LEFT or RIGHT button to change the exposure mode.
There are Manual, Auto, Hold mode available.
The default set is AUTO EXPOSURE when the camera power up.
3. Select SHUTTER and press LEFT or RIGHT button to adjust the value of Exposure time.
Note: Only Manual exposure is set, the value can be adjusted.
4. Select GAIN and press LEFT or RIGHT button to adjust the value of Gain.
Note: Only Manual exposure is set, the value can be adjusted.
5. Select FREQUENCY menu and press LEFT or RIGHT button, it will pop up a window to ask to change frequency or not
as below picture. There are 50HZ and 60HZ can be adjust to suit the different light frequency.
6. Select DEFAULT and press LEFT or RIGHT button, it will pop up a window to ask if like to reset the camera or not. The
camera is set as auto exposure when reset the camera.
7. Select BACK and press MENU button to return main menu.
Page 9
Color Set
1. Select Color set from main menu and press MENU button to enter Color set menu as below picture show.
2. Select Image MODE and press LEFT and RIGHT button to change the image mode.
Color, Mono, Negative are available. Color is the default set.
3. Select RED GAIN and press LEFT or RIGHT to adjust the RED GAIN value. It ranges from 0 to 99.
The default value is 50.
4. Select BLUE GAIN and press LEFT or RIGHT to adjust the BLUE GAIN value. It ranges from 0 to 99.
The default value is 50.
5. Select WB CONTROL and press LEFT or RIGHT button to change AUTO WB to MANUAL WB.
Please move the image to blank, and switch to MANUAL AWB to do white balance.
6. Select BACK and press MENU button to return the main menu.
Cross Set
1. Select Cross set from main menu and press MENU button to enter Cross set menu as below picture show.
2. Select Line and press LEFT or RIGHT button to adjust the value of line number. The max line number is 8. If there are
more than 1 line shown in the screen, adjust line number to switch different lines. The user can change LINE number to
CROSS to activate cross hair.
3. Select LINE DIR and press LEFT or RIGHT button to adjust the line direction, there are horizontal and vertical line direc-
tion available.
Note: The default set of LINE DIR is OFF.
4. Select LINE SIZE and LEFT or RIGHT button to adjust the line width. It ranges from 1 to 5. The default value is 1.
5. Select POSITION and press LEFT or RIGHT button to adjust the horizontal or vertical position. Vertical line position
ranges from 0 to 1080. Horizontal line position ranges from 0 to 1920.
6. Select LINE COLOR and press LEFT or RIGHT to change the different color of line.
RED, BLUE, GREEN, WHITE, BLACK are available. The default color is red.
7. Select BACK and press MENU button to return main menu.
Page 10
Special Set
1. Select Special set from main menu and press MENU button to enter Special set menu as below picture show.
2. Select FREEZE to freeze the current preview image.
3. Select COMPARE
4. Select MIRROR and press LEFT or RIGHT button to mirror the current preview image. The default value is OFF.
5. Select INVERSE and press LEFT or RIGHT button to inverse the current preview image. The default value is OFF.
Save
• Capture still image.
Short Press to capture still image. If the SD card doesn’t exist, it will pop up a window saying “SD card Exit”.
• Save video.
Long Press to take A video and save it to micro SD card. If the SD card doesn’t exist, it will pop up a
window saying “SD card Exit”.
Table of contents
Languages:
Other Optika Camcorder manuals
Popular Camcorder manuals by other brands
Panasonic
Panasonic AG-HMC152EN operating instructions
Insignia
Insignia NS-DCC5HB09 - Camcorder - 720p user guide
MYDLINK
MYDLINK DCS-6100LH Quick installation guide
Sony
Sony video Hi8 Handycam CCD-TR555 operating instructions
SECURECOM
SECURECOM V-5014B installation guide
Panasonic
Panasonic HDC-SD100 operating instructions
