Oppray ML-W0194A User manual
19x15W ZOOM MOVING
User Manual
Please read this user manual before using this product.
2
INDEX
STATEMENT 3
ACCESSORIES 3
SAFETY INSTRUCTION 3
GENERAL GUIDELINES 4
INSTALLATION 6
TECHNICAL SPECIFICATION 8
PHOTOMETRIC DATE 10
CONTROL SYSTEM 11
CHANNEL DESCRIPTION: 12
CLEANING AND MAINTENANCE
20
TROUBLESHOOTING
21
3
STATEMENT
The product has well capability and intact packing when leave
factory. All of the user should comply with warning item and manual, any
misuse cause of the damages are not included in our guarantee, and
also cannot be responsible for any malfunction & problem owing to
ignore the manual.
ACCESSORIES
These items are packed together with the product:
Name
Quantity
Unit
Remark
USER MANUAL
1
PCS
DMX CABLE
1
PCS
POWER CABLE
1
PCS
CLAMP
2
PCS
SAFTY CABLE
1
PCS
SAFETY INSTRUCTION
Please keep this User Guide forfuture consultation. If you sell the unit toanother
user, be sure that they also receive this instruction booklet.
4
GENERAL GUIDELINES
NEVER OPEN THIS FIXTURE WHILE IN USE!
During the initial operation of this fixture, a light smoke or smell may emit
from the interior of the fixture. This is a normal process and is caused by
excess paint in the interior of the casing burning off from the heat
associated with the lamp and will decrease gradually over time.
This fixture is a professional lighting effect designed for INDOOR / DRY
LOCATIONS ONLY on stage, in nightclubs, theatres, etc.
Please make sure there are NO FLAMMABLE MATERIALS close to the
5
fixture while operating, to prevent any fire hazard.
The fixture must be installed in a location with adequate ventilation, at least
1.5 feet (.5m) from adjacent surfaces. Be sure no air ventilation slots are
blocked.
DO NOT attempt installation and/or operation without knowledge how to
do so.
DO NOT permit operation by persons who are not qualified to operate this
type of fixture. Most damages are the result of operations by
nonprofessionals. Consistent operational breaks may ensure the fixture will
function properly for many years to come.
DO NOT shake fixture, avoid brute force when installing and/or operating
fixture.
Always install the fixture with an appropriate safety cable. When installing
the fixture in a suspended environment, always use mounting hardware
that is no less than M10 x 25 mm, also be sure the hardware is insert in the
pre-arranged screw holes in the bracket of the fixture.
Use the original packaging and materials to transport the fixture in for
service.
DO NOT TOUCH the housing bare-hand during its operation. Turn OFF
the power and allow approximately 15 minutes for the fixture to cool down
before replacing or serving.
6
INSTALLATION
C A U T I O N S
For added protection, mount the fixture in areas outside walking paths,
seating areas, or in areas were unauthorized personnel might reach the
fixture.
Ambient operating temperature range for this fixture is 5° to 113°F. (-15°
to 45°C) Do not use the fixture under or above this temperature.
Before mounting the fixture to any surface, make sure the installation area
can hold a minimum point load of 10 times the weight of the fixture.
Fixture installation must always be secured with a secondary safety
attachment, such as an appropriate safety cable.
Never stand directly below the device when mounting, removing or
servicing.
The unit should be mounted via its screw holes on the bracket. Always ensure
that the unit is firmly fixed to avoid vibration and slipping while operating. And
make sure that the structure to which you are attaching the unit is secure and is
able to support a weight of 10 times of the unit’s weight. Also always use a
7
safety cable that can hold 12 times of the weight of the unit when installing the
fixture.
The equipment must be fixed by professionals. And it must be fixed at a place
where is out of the touch of people.
Clamp mounting
The moving head provides a unique mounting bracket assembly that
integrates the bottom of the base, the included ‘Omega Bracket’ and the
Safety Cable rigging point in one unit (see the illustration below).When
mounting this fixture to truss be sure to sere to secure an appropriately rated
clamp to the included Omega Bracket using a M10 screw fitted through the
center hole of the ‘omega bracket’. As an added safety measure be sure to
attached at least one properly rated Safety Cable to the fixture using one of
the safety cable rigging point integrated in the base assembly.
8
DMX-512 control connection:
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the
other side to the male 3-pin XLR input of the moving head. You can chain multiple Moving
head together through serial linking. The cable needed should be two core, screened cable
with XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator:
For installations where the DMX cable has to run a long distance or is in an electrically noisy
environment, such as in a discotheque, it is recommended to use a DMX terminator. This
helps in preventing corruption of the digital control signal by electrical noise. The DMX
terminator is simply an XLR plug with a 120 resistor connected between pins 2 and 3,which
is then plugged into the output XLR socket of the last fixture in the chain. Please see
illustrations below.
TECHNICAL SPECIFICATION
Input Voltage: AC90-240V 50/60Hz
LED Quantities: 19pcs 15W 4-IN-1 LEDs (R, G, B, W)
9
Control Signal: DMX512/Master-slave/Auto/Sound
Control Channel: 16/24DMX channels
Power Consumption: 350W
Display: WQERFWSFRF
Working lifetime: 100,000 hours with low power consumption
Strobe: 1-25 times/second
PAN: 540 degree with 16bit rotate
Tilt: 240 degree with 16bit rotate
Beam angle: 8-58 degrees
Color: RGBW infinite mixture
Dimmer: 0-100% linear dimming system
Dimensions: 320(L)*210(W)*380(H)mm
Packing Dimensions:450(D)*370(W)*420(H)mm
Net Weight: 8kg
Gross Weight: 9kg
Key Feature
ZOOM: 3 ZOOM motors work together with the same step
Display:LCD blue display with Chinese and English language.
Protection: Auto temperature control system with big cooling fan.
Quiet, smooth and fast PAN/TILT movement
Low noise and efficient FAN cooling system
Built-in pre-programs with macro effects.
IPOWERCON power connector
45℃ max ambient temperature
IP20 protection rating
3-Pin XLR DMX input/output
Function: With LED shutter, scan position memory and auto reposition.
Perfectly suitable for stage, theatre, TV studio, rental, DISCO and more
10
Please Note: Specifications and improvements in the design of this unit and this manual are subject
to change without any prior written notice
PHOTOMETRIC DATE
LUX Data of 8degree beam angle:
R 7200LUX 1900LUX 1000LUX 620LUX
G 14800LUX 3900LUX 1900LUX 1200LUX
B 14800LUX 3950LUX 1950LUX 1200LUX
W 15200LUX 3850LUX 1950LUX 1200 LUX
RGBW 41100LUX 10000LUX 4600LUX 2550LUX
LUX Data of 45degree beam angle:
R 1150 LUX 310 LUX 200 LUX 110 LUX
G 2450 LUX 100 LUX 350 LUX 180 LUX
B 2450 LUX 710 LUX 350 LUX 200 LUX
W 2350 LUX 700 LUX 320 LUX 200 LUX
RGBW 6600 LUX 2000 LUX 1200 LUX 700 LUX
Table of contents
Other Oppray Dj Equipment manuals
