oozoo Q00200 User manual
USER MANUAL
MODELS Q00200 - Q00209
OOZOO
SMARTWATCHES
First use
Charging the watch
Long-press the button to switch the device on and o.
The watch requires a bluetooth connection with a smartphone that has at
least Android 4.4 or IOS 8.0.
You can charge the watch by pulling o the strap on either side of the watch
case This exposes a standard USB-plug, which you can use with any generic
USB-charger or your computers USB-port.
Please charge the device before rst use. It will take 1 to 2 hours to fully
charge it.
Downloading the app
To download the app, scan the QR code below with your device or search
the app store for ‘FlagFit 2.0’
Functions
Time: The display shows the time, battery and connection icon.
Step tracking: It tracks steps walked or run.
Distance: It tracks the travelled distance and calculates the amount of steps
based on the users weight and height.
Calories: It calculates the amount of calories you have burned based on the
users weight, height and travelled distance.
Heart Rate Monitor: If you have turned on the ‘hourly readings’ button in
‘Device Management’ in the app, the device measures the heart rate every
hour. You can also manually measure the heart rate.
Note: The results of a heart rate measurement are for reference only, and cannot be used as the basis of medical related aspects.
Blood Pressure Monitor: If you have turned on the ‘hourly readings’ button in
‘Device Management’ in the app, the device measures the blood pressure
every hour. You can also manually measure the blood pressure.
Note: The results of a blood pressure measurement are for reference only, and cannot be used as the basis of medical related aspects.
SPO2 Monitor: If you have turned on the ‘hourly readings’ button in ‘Device
Management’ in the app, the device measures the SPO2 every hour. You
can also manually measure the SPO2.
Note: The results of a blood oxygen measurement are for reference only, and cannot be used as the basis of medical related aspects.
Stopwatch: Long-press the button to enter the stopwatch-mode. Short-press
the button to start and end it.
Sleep Monitor: This will record your sleep, including deep sleep, light sleep
and awakenings based on your wrist movement during your sleep. Please
set up your sleep time in your ‘Personal Information’ in the ‘Wearfit‘ app.
Note: The results of the sleepmonitor are for reference only, and cannot be used as the basis of medical related aspects.
Call reminder: When you receive a new call, the device will vibrate
and display the caller ID. You can install this reminder by turning on the
notification button in ‘Device Management’-‘Reminder’ in the ‘Wearfit‘ app.
Message Reminder: When you receive a new message, the device will
vibrate and display the text. You can install this reminder by turning on the
notification button in ‘DeviceManagement’-‘Reminder’ in the ‘Wearfit‘ app.
Multi Sport Mode: Long press the button to enter the sport mode. It will
record sport time, calories birned nd average heart rate.
Note: The results of a heart rate measurement are for reference only, and cannot be used as the basis of medical related aspects.
Frequently asked questions
1. Can’t find the device when paring the device?
Try one of the following:
Please ensure your Bluetooth is turned on and the mobile phone
system is Android 4.4/IOS 8.0 or higher.
Please ensure the distance between your phone and device is less
than 10 meters.
Please ensure that the device is charged and doesn’t display ‘low
power’. If there is still a problem when fully charged, please contact us.
For Android systems; please enter phone settings ‘App &Notication >
Permission > FlagFit 2.0 app’ and turn on all notications.
For IOS system; please ignore the other device from Bluetooth-settings
in your smartphone and try again.
2. Can’t connect the device with the app?
Sometimes the Bluetooth service of smartphones will act weird. Please
restart your Bluetooth and/or restart the smartphone and try again.
3. The app doesn’t display any data?
Please make sure that the device is connected correctly to the smart
phone. Pull down the homepage in the app to refresh the data from
the device. Make sure that your smart phone and device are charged.
4. Wrong time?
Please make sure that the device is fully charged and connected
correctly to the smart phone. The time will be synced automatically
with your smart phone.
Maintenance
• The watch is IP67 waterproof (1m. deep water for max. 30 minutes).
Please do not wear the device when taking a shower.
• When the watch falls or collides, it may cause damage or scratches to the
watch.
• Do not disassemble the device yourself.
• Keep the device away from high temperature and re.
• Use a soft cloth to clean the device. Do not use soap, shower gel or any
other cleaning supplies to clean it.
• Please charge the device one time per three months, if put idle for a long
time.
Specications
• Screen size 0.96 inches
• Waterproof IP67 (dust tight and splash proof)
• Material Soft TPU
• Battery capacity 90mAh
• Battery type polymer Lithium
• Standby time up to 7 days
• Charge time 2 hours
• Charge method USB
The company reserves the right to amend the contents of this manual without notice. Some func-
tions cannot be applied to all mobile phones for normal conditions. Please understand that all test
data generated (heart rate, SPO2, blood pressure) by this product is an indication and for person-
al use only and NOT FOR MEDICAL PURPOSES.
This manual suits for next models
1
Table of contents
Other oozoo Watch manuals
