Onn ONA16TM008 User manual
Model: ONA16TM008
PRODUCT GUIDE
13-32” Tilting TV Wall Mount
2
25 lb
(11.3 kg)
We’ll Make It Stress-Free
If you have any questions,
just give us a call.
877-689-1665.
We’re ready to help!
3/8 in.
(10 mm)
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS – PLEASE READ ENTIRE MANUAL PRIOR TO USE
Before getting started, let’s make sure this mount is perfect for you! Para Español ver página 16
No
—
Perfect!
Yes
—
This mount is NOT compatible. Call 877-689-1665 to find a compatible mount.
Please read through these instructions completely to be sure you’re comfortable with this easy install process.
Also check your TV owner’s manual to see if there are any special requirements for mounting your TV.
If you do not understand these instructions or have doubts about the safety of the installation, assembly or use
of this product, contact Customer Service at 877-689-1665.
Do you have
all the tools
needed?
1
2
3
4
What is your
wall made of?
Ready to begin?
Does your TV
(including accessories)
weigh more than
25 lb (11.3 kg)?
CAUTION:
DO NOT install
into drywall alone
Drywall with
wood studs?
Perfect!
CAUTION: Avoid potential personal injuries and property damage!
●This product is designed for use in wood stud, solid concrete, and concrete block walls - DO NOT install into drywall alone
●The wall must be capable of supporting five times the weight of the TV and mount combined
●Do not use this product for any purpose not explicitly specified by manufacturer
●Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Wood Stud Install
Concrete Install
Awl
Pencil Level Stud Finder
Screwdriver
Tape
Measure
1/8 in.
(3 mm)
Wood
Drill Bit
Electric
Drill Hammer
7/16 in.
(12 mm)
Socket
Wrench Wrench Drill Bit
3/8 in.
(10 mm)
Concrete
Unsure?
Solid concrete or
concrete block?
Call Customer Service: 877-689-1665
Concrete Kit required (not included)
3
Dimensions
in.
[mm] TILT
4
NOTE: Not all hardware included will be used.
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts are included and
undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact Customer Service. Never use damaged parts!
Supplied Parts and Hardware
M4 x 12mm
M5 x 12mm
M6 x 12mm M6 x 35mm
M5 x 35mm
M4 x 35mm
M6 x 14mm M6
22mm
M4 / M5 M6/M8
M8 x 20mm
TV Bracket
TV Bracket
Extenders*
† Nylon locking bracket nuts
are poly-locks and will need
to be forcibly tightened.
Screws
(Extension Bracket)*Nuts
(Extension Bracket)*†* Only needed for TVs with
20.0 x 20.0 cm (7 7/8 x 7 7/8 in.)
hole patterns
03 x4 04 x4
05 x4
06 x4
07 x4
08 x4
09 x4
10 x4
11 x4
13 x4
12 x4 14 x4
01 x1
02 x2
TV Screws
Washers
Spacers
Parts and Hardware for STEP 1
5
1/4 x 2¾ in.
15 x1
Wall Plate
Lag Bolts
16 x2
C1 x2
C2 x2
Concrete Installation Kit (not included)
Contact Customer Service at 877-689-1665 to have these
additional pieces shipped directly to you.
1/4 in.
1/4 x 2½in.
Fischer UX 10 x 60R Anchor
Parts and Hardware for STEP 2
C3 x2
R
Concrete Anchors
For concrete installations ONLY
CAUTION: Do not use in drywall or wood
6
STEP 1 Attach TV Bracket to TV
1.1 Measure Your TV Hole Pattern
cm
inches
inch dimensions are approximate
Measure the width and height of your TV hole pattern in cm.
Record your measurements:
Width__________cm x Height ________ cm
75 mm = 7.5 cm ≈ 3 in.
100 mm = 10 cm ≈ 4 in.
200 mm = 20 cm ≈ 7 7/8 in. W
H
7
1.2 Assemble Your TV Bracket
Determine which TV bracket configuration to use, A or B, based
on your TV hole pattern measurements (W x H) from STEP 1.1.
A20.0
10.0
10.0
7.5
7.5
These smaller hole patterns only use TV bracket 01 .
Do not use the two TV bracket extenders 02 and four screws 03
and four nuts 04 .
7.5 x 7.5
10.0 x 10.0
20.0 X 10.0
Assemble TV bracket extenders 02 onto TV bracket 01 as illustrated.
Secure using four screws 03 and four nuts 04 in the corner holes shown.
NOTE: Nuts 04 are poly-locks and need to be forcibly tightened.
20.0 x 20.0
B
03
20.0
20.0
03
04
02
03
04
01
02
02
01
Dimensions in cm
Dimensions in cm
TV Hole Pattern
Measurement
TV Hole Pattern
Measurement
3/8 in. (10 mm)
wrench
02
8
1.3 Select TV Screw Diameter 1.4 Select TV Screw Length
Hand thread screws into the threaded inserts
on the back of your TV to determine which
screw diameter (M4, M5, M6 or M8) to use.
M5 M6 M8M4
FLAT BACK ROUND BACK CABLESINSET HOLES
ab
If your TV has a flat back AND you want your TV closer to
the wall, use the shorter screws (a).
Use the spacers and longer screws (b) to accommodate:
●Round/irregular back TVs
●TVs with inset mounting holes
●Extra space needed for cables
Too Short
Too Long
CAUTION:
Verify adequate thread
engagement with your screw/
washer/spacer combination
AND TV bracket (STEP 1.5).
-Too short will not hold the TV.
-Too long will damage the TV.
Correct
Standard configurations
are shown. For special
applications, or if you
are uncertain about your
hardware selection,
contact Customer Service
at 877-689-1665.
9
1.5 Attach TV Bracket
01
01
TV Bracket Configuration B
(from page 7)
Illustrated with spacers
TV Bracket Configuration A
(from page 7)
Illustrated with spacers
02
Position your TV bracket configuration over your TV hole pattern - making sure the brackets are vertically centered and level.
Install using either the screw/washer (a: Flat Back) or screw/washer/spacer (b: Round Back / Extra Space) combination you selected for your TV.
CAUTION: Avoid potential personal injuries and property damage! DO NOT use power tools for this step. Tighten the screws only enough
to secure the TV bracket to the TV. DO NOT overtighten the screws.
IMPORTANT: Ensure TV bracket is securely fastened before moving on to the next step.
14
05
09
06
10
07 08
11
12
12
13
13
aFlat Back
bRound Back / Extra Space
10
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate 15 at your desired height and line up the holes with your stud center line. Level the mark the two hole locations.
3. Drill two pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2 3/4 in. (69.8 mm). Be sure to drill into the center of the stud.
23
≤ 5/8 in.
(16 mm)
12¾ in. (69.8 mm)
1/8 in.
(3 mm)
15
CAUTION: Avoid potential personal injury or property damage!
• Drywall covering the wall must not exceed 5/8 in. (16 mm)
• Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
STEP 2A Attach Wall Plate Wood Stud Installation
Table of contents
Other Onn TV Mount manuals
