OnLyee CR1018 User manual
1. Press button once, display starts
flashing.
2. Press button to set the hour.
press button to set the minute.
3. Press button or button to save time or
wait for another 10 seconds to confirm automatically.
To change 12H/24H time format
Hold press button to change 12H/24H time format.
- 02 -- 01 -
Chapter 1 LOCATION OF CONTROLS Chapter 2 POWER RESOURCES
1. Pull out of the insulator at battery compartment to activate
CR2032 coin cell backup battery.
NOTE: Backup battery(included) doesn't support time display but can back up time &
alarm setting.
2. Connect the adapter line to DC jack , then plug into a 100~240V
AC wall power outlet.
Chapter 3 TIME SETTING
CR1018 Mirror Alarm Clock with USB Charger
CREATE YOUR PERFECT SLEEP ENVIRONMENT
SNOOZE
HOUR
MIN
DIMMER HOUR
MINUTE
SNOOZE ALARM 1 ALARM 2 ALARM
OFF
VOLUME
DST
TIM E
12H/24H
12345678910
AM
PM
DST
11
12
13
14
15
16
17
18
19
1. Dimmer Button
4. Time Button(12/24H)
7. Alarm 2 Button
10. Alarm ON Indicator
13. DST Indicator
16. Speaker
19. Back up Battery
2. Hour Button
5. Snooze Button
8. Volume Button(DST)
11. AM Indicator
14. Alarm 1 Indicator
17. DC Input Jack
3. Minute Button
6. Alarm 1 Button
9. Alarm OFF Button
12. PM Indicator
15. Alarm 2 Indicator
18. USB Output Jack
TIME
12H/24H
TIME
12H/24H
TIME
12H/24H
Contact our experts
Mad e in Chi na
Http://www.onlyee.com
Version 1.0
1. Press button, the alarm indicator will light up,
the display starts flickering.
2. Press button to set the hour,
press button to set the minute.
3. Press button or button to save alarm
time or just wait for another 10 seconds to confirm
automatically.
Setting ALARM 2 is the same as ALARM 1.
Set Alarm Ring Volume
Repeat button to adjust the alarm ring volume for your
preference.
There is 7 levels, The sequence is as follows:
04(default)-05-06-07-06-05-04-03-02-01-02........
- 05 - - 06 -
- 04 -- 03 -
Chapter 3 ALARM SETTING
1
1
Turn off Alarm
When alarm goes off:
1. Press button to temporarily turn off alarm for 9
minutes. Alarm will ring every next 9 minutes.
2. Press button to turn off alarm for 24 hours.
The alarm indicator or is still on, which means
alarm is still activated and will ring after 24 hours.
3. Cancel Alarm
Hold press button to turn off alarm1 or alarm 2
permanently. And corresponding indicator or will
turn off.
If alarm 1 goes off, then hold press button, just
turn off alarm1 permanently. indicator will turn off .
If alarm 2 goes off, then hold press button, just
turn off alarm 2 permanently. indicator will turn off.
2
1
2
Chapter 6 USB CHARGING
Plug charging cable into device such as phone or tablet.
Device can charge both your phone or tablet at the same time.
The maximum charge current is 1 Ampere.
Chapter 4 DIMMER
Repeat button to adjust the brightness of display for
your preference.
There is 7 levels, The sequence is as follows:
04(default)-05-06-07-06-05-04-03-02-01-02........
Hold press button to switch DST function.
DST indicator will turn on.
Hold press button again to turn off DST function.
DST indicator will turn off.
Chapter 5 DST
1 2
ALARM 1
HOUR
MIN
ALARM 1 SNOOZE
SNOOZE
ALARM OFF
ALARM OFF
ALARM OFF
ALARM OFF
DIMMER
22:23
2
89%
E
E
1
VOLUME
DST
VOLUME
DST
VOLUME
DST
Other OnLyee Alarm Clock manuals
