Onida FIRE TV 32HIF3 User manual
INTRODUCTION:
Thank you on Your purchase of ONIDA FIRE TV. Your TV comes with the latest technology
to enhance your TV experience.
Your ONIDA FIRE TV can control all Alexa Enabled Devices.
The latest eco-friendly power saving technology will ensure the TV will go into sleep
mode within 30 minutes, if the TV is idle and no input is connected to the TV.
WHAT'S IN THE BOX :
1. LED TV 2. Remote Control
3. Stand Left & Right 4. Screws for Stand
5. Wall mount 6. Screws for wall mount
7. Concrete Plug(x2) 8. Concrete Screws
9. User Guide. 10. Marketing Insert. (optional)
Note: *Batteries are not provided with this LED/LCD TV model
After Unpacking, please inspect your TV for damage. If you notice any damage please
consult your Dealer
Accessories may not be placed all together. Take care not to throw them away
unintentionally.
This product contains possibly dangerous parts (such as plastic bags), that can be
breathed in or swallowed by young children accidentally. Keep these parts out of reach
of young children.
INTRODUCTION & OPERATION FOR ONIDA FIRE TV :
Your ONIDA Fire TV remote includes a wireless remote with a 5-way directional track pad
that allows you to quickly and easily navigate your device.
Before you can use the remote, you must install the 2 AAA batteries and pair it
with your ONIDA Fire TV .
1.Slide open the battery compartment on the back of the Remote
control.
2.insert two AAA size batteries. Make sure to match the (+) and (-)
ends of batteries match with Remote (+) and (-).
3.SIide back the battery compartment. Make sure it clicks into
place.
Tips For Better Life For Battery:
For better reliability and longevity use 1.5 volt x 2 AAA"ALKALINE BATTERIES'’
page:2
page:3
Onida Fire TV Hardware Basics
DIGITAL
AUDIO OUT
HEAD PHONE
COMPOSITE/
VIDEO IN
HEAD PHONE
USB 2.0
OPTICAL
AUDIO OUT
COMPOSITE IN
R. AUDIO IN
L. AUDIO IN
ANTENNA
LAN HDMI 3 HDMI 2 HDMI 1/ARC
Power/lnput Button: on the bottom Of TV
1. To switch the TV from Standby, please press this button once.
2. When the TV is ON by pressing once the list of Input Sources Will be
displayed and you can select any source from the mentioned
list by highlighting the source. (*Optional)
3. When TV is ON, by pressing & holding this key for few seconds to put the TV into
Standby
*This function work in selected onida model only
Note: The location and names of the function buttons and power button on the TV may
vary according to TV model.
page:4
Guide
Setting
It displays "Recently accessed or used content
It will display the "Apps and Games" which downloaded Launch these Apps. from any screen
with TV set in ON condition or TV is in standby, by pressing these hot keys
Press to open the LIVE TV programs guide
Access Quick setting menu
Recent
The Fire TV Remote App is not designed to play games. Some games might work, but performance will vary.
Play/Pause
CH+/CH-
Press the rewind button once to skip 10 seconds backward Press and
hold the rewind button to continue navigating backward in the video.
Additional presses allow you to cycle through the available speed options.
Stand By
Alexa
Select
Back
Rewind
Turns TV power ON or OFF, when your TV is OFF the LED indicator on the
front of the Tv will light up
Hold down to turn on the ALEXA- enable microphone and start voice
input. Release the button to end voice input. with ALEXA, you can use
your voice to search for content control playback, and much more.
(ALEXA Voice service requires Amazon account)
Confirm a selection
volume +/-
Increase(+) or Decrease (-) the TV volume
Returns you to the Home screen from any screen on your Fire TV device.
Presents various functions and settings depending on which screen you are
accessing.
Start, Resume, or Play back of USB contains or internet video streaming
Mute
Home
Menu
Forward
Return to the previous screen
Mute or Unmute the audio of TV
Press the forward button once to skip 10 seconds forward. Press and hold the
forward button to continue navigating forward in the video. Additional presses
allow you to cycle through the available speed options.
To navigate channel UP or Down
action Move UP, DOWN, LEFT or RIGHT
Navigation
Initial Setup for Onida Fire TV With Unboxing
Setting up language
When the TV is switched on for the first time, the desired language selection menu is
shown. Follow the below instructions to select the menu language:
1.) Press the navigation button (4) on the Remote control to highlight the desired language
then press the select button (3) on the remote control to confirm the selection
Refer following image for language setup. please refer fig.1
2.) Once the language option has been chosen, customer should choose'Continue' in
continue or store use mode page. please refer fig.2
Pairing Your Remote Control With TV Set:
Customer can be use following procedure for pairing remote with fire TV.
Procedure 1.Here customer scan QR code from mobile which is displayedon TV screen
and download Fire TV App. from google play store. and select set up new device and
follow the instructions.
OR (please refer fig,3 on next page for Remote control pairing )
Procedure 2. Customer press remote “SELECT”(3) button for Set up with Remote, it is
searching remote and paired remote automatically with Fire TV ,
Fig.1
Fig.2
page:5
Some time it will be happen it is take a time or not paired automatically, customer refer
following image which is shown on TV screen for paired remote control manually, pressing
the “HOME’’ (9) button on the remote for 10 second. refer fig.4
When remote paired with Onida Fire TV following POP UP massage shown, it means now
TV is connected to Fire TV. refer fig.5
Pairing Your Remote Control With TV Set:
Fig.3
Fig.4
Fig.5
page:6
Set Up a Wireless or Wired Connection
Fire TV supports wireless or wired Internet connections. Connect your Fire TV device to
the Internet to access movies, TV shows, games, and apps.
Wired Network Connection :(with initial setup )
a. Connect one end of an Ethernet cable (not included) to the back of your Fire TV, and then
connect the other end to your router. click on “Configure Ethernet connection”and enter
your IP address ,refer fig.6 and fig.7 ,
you will now be asked to sign in to your Amazon account ,please refer “Sing in to your
Amazon account page
fig.6
fig.7
b. From the Home screen, select Settings > System. Next to Network, you will see
Wired.
c. After you connect to a wired network, press the Home button to display the Home
screen.
* ,no needs In the initial setup flow after remote paring screen, network page will show
to point (b) and point (c) connecte wireddevice will automatically for network no need
to setting button
page:7
Wireless Network Connection:
a. From the Home screen, select Settings > Network > Wi-Fi.Your Amazon Fire TV device automatically detects
nearby Wi-Fi networks that broadcast their network name. Some networks are open for everyone to join, while
others require a password to connect.
b. Under Available Networks, select a wireless network and enter the network password (if required)
using the onscreen keyboard. You can also use the keyboard in the Fire TV Remote App.
*In the initial setup flow after remote paring screen, network page will show and device will automatically scan
for network no need to setting button. refer fig.8 and fig.9
Fig.8
Fig.9
TIP :
• For optimal wireless performance, do not place your Amazon Fire TV in an enclosed cabinet, as it impacts signal
strength to the device, remote, and game controllers.
• For Fire TV, if you are switching from a wired to a wireless connection, disconnect the Ethernet cable
from your Amazon Fire TV device before switching to a wireless connection.
refer fig.10,and fig.113.) WPS button (Wi-Fi Protected Setup)
a.) For select routers, it is possible to establish connection between the TV and the router without the need for
a password. Refer to the router user manual for more details.
b.) Press the navigation button (4) and select 'Connect using WPS Push Button', then press the select button (3)
to confirm.
c.) Press the WPS button on the router. The TV will connect to the router automatically without the use of a
password.
page:8
3.) WPS button (Wi-Fi Protected Setup)
d. A code will appear on the screen. Enter this code into the router. It may take up to two minutes to connect.
Refer fig. 10 and fig.11 for WPS
Fig.10
Fig.11
In order to use your Amazon Fire TV device, register it to your Amazon account.Refer fig.12
To register your device, connect it to the Internet. To learn more, go to Set Up a Wireless or Wired
Connection on page
Signing-in to Amazon account refer fig.12,fig.13,and fig.14
To verify that your Amazon Fire TV device is registered to your Amazon account:
1. From the Home screen, select Settings > My Account.
• If no account is currently registered, select Register to register your Amazon Fire TV device to the
desired Amazon account.
• If you would like to register a different Amazon account, select the Amazon account that is currently
registered, and then select Deregister.
Following step for register your account
remote Press the navigation button (4) and select 'I already have an Amazon account then press
remote the select button (3) to confirm.
page:9
If you purchased your Amazon Fire TV device online from Amazon using your Amazon account, it should
already be registered to you. If you purchased your Amazon Fire TV device from another retailer or
received it as a gift, follow the on-screen instructions for entering your Amazon account information and
password.
Note: If you do not have an Amazon account, press the navigation key (4) and select "l am
new to Amazon and follow the instruction on screen to register. Refer fig.12
Once selected, you will be prompted to visit a web link to complete registration on the
handheld device such as mobile phone or tablet
page:10
Fig.12
Fig.13
Fig.14
Signing-in to Amazon account
This manual suits for next models
3
Table of contents
Other Onida LED TV manuals
