Onfloor Propel User manual
Operating Manual
PROPEL
Striker 2840 Parts List - PN 220868 - Printed in USA 03/18/08
TM
This manual is furnished with each new ONFLOOR. It provides necessary operating and preventive
maintenance instructions. Read this manual completely and understand the machine before operating
or servicing the machine.
This machine will provide excellent service. However, the best results will be obtained at minimum
costs if:
The machine is operated with reasonable care.
The machine is maintained regularly by following maintenance instructions provided.
The machine is maintained with ONFLOOR supplied parts.
Copyright © 2007 ONFLOOR
TABLE OF CONTENTS
1
RADIAL AT OPERATOR MANUAL
SAFETY PRECAUTIONS
OPERATION
OPERATOR RESPONSIBILITY
COMPONENT LOCATION
ATTACHING THE SWEEPER TO THE FORKLIFT
GENERAL SWEEPING AND BRUSH INFORMATION
SWEEPING
MAIN BROOM ADJUSTMENT
SIDE BROOM ADJUSTMENT
EMPTYING THE HOPPER
REMOVING THE SWEEPER FROM THE FORKLIFT
SWEEPER TROUBLESHOOTING
MAINTENANCE
REPLACING THE MAIN BROOM
ADJUSTING THE MAIN BROOM TAPER
REPLACING THE SIDE BROOMS
HOPPER DUST FILTER
REPLACING THE HOPPER DUST FILTER
SKIRTS AND SEALS
BEARINGS
V-BELT TENSION
STATIC DRAG CHAIN
HOPPER SKID BLOCK
TIRES
FORKTUBE PIVOT BOLT
TRANSPORTIN THE MACHINE
MACHINE JACKING
SPECIFICATIONS
Page
2-6
7
7
8
9-11
12
13-14
15
16
17-19
20-21
22
23
23-24
25
26
27
28
29-32
32
32
32
32
33
33
33
34
35
SAFETY PRECAUTIONS
2
SAFETY PRECAUTIONS
WARNING: To warn of hazards or
unsafe practices which could result
in severe personal injury or death.
FOR SAFETY: Identify actions
that must be followed for safe
operation of sweeper and forklift
equipment.
WARNING: Forklift emits noxious gases.
Operating in unventilated environments may
result in respiratory damage or asphyxiation.
For exposure limits, contact your regulatory
authorities. Keep engine tuned properly.
WARNING: Raised hopper may fall.
Stay clear of hopper.
WARNING: Moving belt and pulleys.
Keep away from belt drive.
FOR SAFETY:
1. Do not operate sweeper or forklift:
- Unless properly trained and authorized.
- Unless operator manual is read and
understood.
- If it is not in proper operating
condition.
- In flammable or explosive areas.
- In areas with possible falling objects
unless equipped with overhead guard.
The following precautions illustrated herein are
imperative for safe machine operation:
The machine is suited to sweep and collect
disposable debris. Do not use the machine in
ways other than described in this Operator
Manual. The machine is not designed for use
on public roads.
The following information signals potentially
dangerous conditions to the operator or
equipment.
3. When using machine:
- Go slow on inclines and slippery
surfaces.
- Do not carry passengers on
machine.
- Use care when reversing machine.
- Use brakes to stop machine.
- Move machine with care when
hopper is raised.
- Make sure adequate clearance is
available before raising hopper.
- Always follow safety and traffic
rules.
- Report machine damage or faulty
operation immediately.
4. Before leaving or servicing machine:
- Stop on level surface.
- Set parking brake.
- Turn off machine and remove key.
5. When servicing machine:
- Avoid moving parts. Do not wear
loose clothing.
- Block machine tires before jacking
machine up.
- Jack machine up at designated
locations only.
- Use hoist or jack that will support
the weight of the machine.
- Wear eye and ear protection when
using pressurized air or water.
6. When loading/unloading machine
onto/off truck or trailer:
- Use truck or trailer that will
support the weight of the machine.
- Block machine tires.
- Tie machine down to truck or
trailer.
SAFETY PRECAUTIONS
The following safety labels are mounted on the
machine in the locations indicated. If these or
any label becomes damaged or illegible, install
a new label in its place.
3
WARNING
Inlet
From Fan
Keep Away
WARNING
Keep Away
From Fan
Inlet
DECAL, FAN WARNING
DECAL, PINCH POINT WARNING
WARNING
Clear Of
Pinch Point
Keep Limbs
Clear Of
Keep Limbs
WARNING
Pinch Point
Keep Limbs
Pinch Point
Clear Of
WARNING
Keep Limbs
Pinch Point
Clear Of
WARNING
Surfaces.
-Stop On Level Surface.
5. Before Leaving Machine:
Agents.
And Understood.
Surface.
2. Do Not Raise Hopper:
1. Do Not Operate Machine:
Brake.
3. Do Not Use Flammable Cleaning
Or Equivalent Replacement Parts.
-When Parking Remove Key.
6. Contact Your Dealer For Manufactures Original
-Turn Off Key And Set Parking
4. Go Slow On Grades And Slippery
Front of Forklift And Inline With Forklift.
-Unless Sweeper Is Positioned Directly In
-Unless Machine Is On A Level
-In Poorly Ventilated Areas.
FOR SAFETY
-In Flammable Or Explosive Areas.
-Unless Operation Manual Is Read.
-Unless Trained And Authorized.
DECAL, FOR SAFETY
WARNING
Of Swinging
Stay Clear
Tube
DECAL, SWINGING TUBE WARNING
WARNING
Stay Clear
Tube
Of Swinging
90-88004
OLATHE,KS 66062
19925-AW.161STSTREET
Brake.
-TurnOff Key And Set Parking
6.Use Trex Company Supplied Or
-WhenParking Remove Key.
EquivalentReplacement Parts.
SERIALNO.
MODELNO.
GROSSWT.__________LBS.__________KG.
-UnlessMachine Is On A Level
-UnlessSweeper Is Positioned Directly In
Frontof Forklift And Inline With Forklift.
Surface.
Agents.
4.Go Slow On Grades And Slippery
5.Before Leaving Machine:
Surfaces.
3.Do Not Use Flammable Cleaning
FOR SAFETY
-UnlessTrained And Authorized.
-UnlessOperation Manual Is Read.
-InFlammable Or Explosive Areas.
1.Do Not Operate Machine:
-InPoorly Ventilated Areas.
AndUnderstood.
2.Do Not Raise Hopper:
-StopOn Level Surface.
2
1
3
90-88024
DECAL, PINCH POINT WARNING
SAFETY PRECAUTIONS
4
Keep Away
From
Belt Drive
WARNING
WARNING
Keep Away
From
Belt Drive
DECAL, BELT WARNING
WARNING
From
Belt Drive
Keep Away
90-88008
SAFETY PRECAUTIONS
5
90-88006
Of Hopper
Stay Clear
WARNING
DECAL, HOPPER WARNING
WARNING
Of Hopper
Stay Clear
DECAL, HOPPER WARNING
Stay Clear
Of Hopper
WARNING
90-88006
Of Hopper
WARNING
Stay Clear
DECAL, BELT WARNING
WARNING
Keep Away
Belt Drive
From
Keep Away
From
Belt Drive
WARNING
Keep Away
From
Belt Drive
WARNING
From
Belt Drive
WARNING
Keep Away
DECAL, BELT WARNING
SAFETY PRECAUTIONS
6
DECAL, BELT WARNING
Keep Away
Belt Drive
WARNING
From
DECAL, HOPPER WARNING
WARNING
90-88006
Of Hopper
Stay Clear
Keep Away
WARNING
Belt Drive
From Keep Away
From Fan
Inlet
WARNING
DECAL, FAN WARNING
Inlet
From Fan
Keep Away
WARNING
Of Hopper
Stay Clear
WARNING
OPERATION
OPERATOR RESPONSIBILITY
7
The operator’s responsibility is to oversee
daily maintenance and checkups of the
machine to ensure safe and effective
mechanical operation. The operator
is expected to inform service personnel
when required maintenance schedules
occur as stated in the MAINTENANCE
section of this operators manual.
Read manual carefully before operating
this equipment.
FOR SAFETY: Do not operate machine,
unless operation manual is read and
understood.
Check the machine for shipping damage.
Check to make sure machine is complete
per shipping instructions.
Keep you machine regularly maintained by
following the maintenance information in this
manual. We recommend taking advantage of
a regularly scheduled service contact from
your authorized dealer.
Order parts and supplies directly from your
authorized representative. Use the parts
manual provided when ordering parts.
OPERATION
MAIN
BROOM
DOOR
(/00%22%,%!3%4(!.$,%
-!)."2//-
,)&4,%6%2
3)$%"2//-
3)$%
"2//-
!$*534-%.4
+./"
&),4%2
3(!+%2
&),4%2!##%33$//2
(/00%2,!4#(,%6%2
2%4!).).'
342!02!4#(%4
2%4!).).'
342!0
-!)."2//-,%6%2
34/0!33%-",9
8
Table of contents
Other Onfloor Floor Machine manuals
