OneTouch Select User manual
O ner’s Booklet
Manual del propietario
Blood Glucose Monitoring System
Easy to Use. Results You Can Trust.
TM
Sistema de control de glucosa en sangre
Fácil de usar. Resultados confiables.
ii
Welcome to the OneTouch® family!
OneTouch®is committed to creating a world without limits for people
with diabetes.
The OneTouch®Select™Meter makes it simple to get a test result and
review past results. This owner’s booklet will help you learn how to use
your meter properly. Please read it carefully.
f you need assistance, please contact LifeScan Customer Service at
1 800 227-8862 (available 24 hours a day, seven days a week). Please
also visit www.LifeScan.com for more information.
NOTE: Before testing, read this owner’s booklet carefully.
ii
Table of Contents
Setting up your system g. 1
Starting the test process g. 8
Getting a blood sample g. 12
Applying blood and reading results g. 24
Reviewing past results and averages g. 32
Control solution testing g. 38
Caring for your system g. 44
Understanding error and other messages g. 50
Detailed information about your system g. 59
Index g. 64
iii
Before you begin
Before using this product to test your blood glucose, carefully read this booklet
and the inserts that come with the OneTouch®Select™Test Strips and OneTouch®
Select™and OneTouch®Select™ High Control Solutions. Take note of warnings
and cautions throughout this booklet, which are identified with . Many people
find it helpful to practice the test with control solution before testing with blood
for the first time. See page 38 in the Control solution testing section.
Intended use
The OneTouch®Select™Blood Glucose Monitoring System is intended to be used
for the quantitative measurement of glucose (sugar) in fresh capillary whole
blood. The OneTouch®Select™System is intended for self-testing outside the body
(in vitro diagnostic use) by people with diabetes at home and by health care
professionals in a clinical setting as an aid to monitor the effectiveness of diabetes
control. t should not be used for the diagnosis of diabetes or for testing newborns.
Test principle
Glucose in the blood sample mixes with special chemicals in the test strip and
a small electric current is produced. The strength of this current changes with
the amount of glucose in the blood sample. Your meter measures the current,
calculates your blood glucose level, displays the result, and stores it in its
memory.
WARNING: K p th m t r and t sting suppli s away from young childr n.
Small it ms such as th batt ry door, batt ry, t st strips, lanc ts, prot ctiv disks
on th lanc ts, and control solution vial cap ar choking hazards. Do Not ing st or
swallow any it ms.
a
b
d
c
iv
The OneTouch®Select™Blood Glucose Monitoring System
Your new OneTouch®Select™System Kit includes:
a OneTouch®Select™Meter (battery included)
b OneTouch®Lancing Device
If another type of lancing device was included,
see the separate instructions that came with
that lancing device.
c OneTouch®AST™Clear Cap
d OneTouch®UltraSoft®Sterile Lancets
e Carrying Case
You will also need OneTouch®Select™ Control Solution and OneTouch®Select™ Test Strips.
Control solution and test strips are sold separately.
Documents in your kit include this owner’s booklet, a starter guide, and a warranty
registration card. f any items are missing from your kit, call Customer Service.
1
Display
T st port
nsert test strip here to
turn meter on for testing
mg/dL is the
pre-set unit of
measure
Up and down buttons
Select or change information
ndicates
selection
available
using up or
down button
OK button
Turns the meter on/off
Confirms menu selections
Setting up your system
Getting to know your OneTouch®Select™Blood Glucose Meter
and test strips
Front Back
with battery door open Test strip
M t r batt ry Batt ry
door
Confirmation
window
Contact bars
nsert into
test port
Edg to
apply sampl
Data port
2
Turning your meter on
There are two ways to turn your meter on:
To perform a test, insert a test strip as far as it
will go. The meter will briefly perform system
checks, then the display will turn on.
or,
With the meter turned off, press and hold
for two seconds to access MAIN MENU.
Check that the screen shows solid black for two seconds. f it does, the
display is working properly. f the meter does not power on, try changing
the meter battery. See pages 48–49.
Turning your meter off
There are several ways to turn your meter off:
• Press and hold for three seconds.
• Your meter will turn off by itself if left alone for two minutes.
• Go to MAIN MENU and press or to highlight METER OFF, then press .
• Before or after completing a test, remove the test strip. f you advance
from the test result screen to the MAIN MENU by pressing , removing the
test strip will not turn the meter off. Use one of the three methods above.
CAUTION: f you see
any light areas within
the black start-up screen,
there may be a problem
with the meter.
Call Customer Service.
S tting up your syst m
3
S tting up your syst m
Setting the meter language, date and time
You can change many of the settings that came pre-set with your meter.
Before using your meter for the first time or if you change the meter
battery, you should check and update these settings. Make sure you
complete steps 1 through 6 below to ensure your desired settings are
saved.
1. Turn th m t r on, s pag 2
2. G t to th SETTINGS scr n
When using the meter for the first time, or
after changing the meter battery, you will
automatically start in the SETTINGS screen.
n other cases, from the MAIN MENU,
press or to select SETTINGS. To confirm
your selection, press .
S tting up your syst m
The pre-set language, date, time and unit of
measure appear on the display. f they are
correct, press to return to the MAIN MENU.
f the language, date, or time are not correct,
select CHANGE and press .
The display now shows the LANGUAGE screen.
3. Choos a languag
Now press or to highlight the language
of your choice. To confirm your selection,
press .
The display now shows the DATE AND TIME screen.
NOTE: f you select the wrong language, press and hold for three seconds
to turn the meter off. Then, turn the meter back on and re-start from step 1.
4
Other manuals for Select
2
Table of contents
Languages:
Other OneTouch Blood Glucose Meter manuals
OneTouch
OneTouch FASTTAKE User manual
OneTouch
OneTouch Verio Reflect User manual
OneTouch
OneTouch SURESTEP User manual
OneTouch
OneTouch Verio Flex User manual
OneTouch
OneTouch Verio Instruction Manual
OneTouch
OneTouch INDUO User manual
OneTouch
OneTouch Delica Plus User manual
OneTouch
OneTouch Verio User manual
OneTouch
OneTouch UltraMini User manual
OneTouch
OneTouch Verio IQ User manual
OneTouch
OneTouch VERIO SYNC User manual
OneTouch
OneTouch VitA Instruction Manual
OneTouch
OneTouch ONETOUCH SURESTEP (WITH DATA PORT) User manual
OneTouch
OneTouch Verio IQ User manual
OneTouch
OneTouch Verio User manual
OneTouch
OneTouch UltraEasy User manual
OneTouch
OneTouch Verio IQ User manual
OneTouch
OneTouch OneTouch Ultra User manual
OneTouch
OneTouch Verio IQ User manual
OneTouch
OneTouch UltraMini User manual
