Omron CX-SUPERVISIOR - GETTING STARTED V2.0 User manual
Cat. No. W08E-EN-01
CX-Supervisor
Software Release 2.0
GETTING STARTED
Cat. No. W08E-EN-01 Note: Specifications subject to change without notice.
Authorized Distributor:
Printed in Europe
Cat. No. W08E-EN-01 CX-Supervisor Software Release 2.0 GETTING STARTED
CX-Supervisor
Getting Started
Software Release 2.0
OMRON Getting Started with CX-Supervisor
Revision 2.0 Page i
Notice
OMRON products are manufactured for use according to proper procedures by a qualified operator
and only for the purposes described in this manual.
The following conventions are used to indicate and classify precautions in this manual. Always heed
the information provided in them. Failure to heed precautions can result in injury to people or
damage to the product.
DANGER! Indicates information that, if not heeded, is likely to result in loss of life or
serious injury.
WARNING Indicates information that, if not heeded, could possibly result in loss of
life or serious injury.
Caution Indicates information that, if not heeded, could result in relatively serious
or minor injury, damage to the product, or faulty operation.
OMRON Product References
All OMRON products are capitalised in this manual. The word “Unit” is also capitalised when it
refers to an OMRON product, regardless of whether or not it appears in the proper name of the
product.
The abbreviation “PLC” means Programmable Logic Controller and is not used as an abbreviation for
anything else.
Getting Started with CX-Supervisor OMRON
Page ii Revision 2.0
OMRON Getting Started with CX-Supervisor
Revision 2.0 Page iii
Visual Aids
The following headings appear in the left column of the manual to help you locate different types of
information.
Note: Indicates information of particular interest for efficient and convenient
operation of the product.
1, 2, 3… Indicates lists of one sort or another, such as procedures, checklists etc.
Represents a shortcut on the Toolbar to one of the options available on the
menu of the same window.
Indicates a program must be started, usually by clicking the appropriate
option under the standard Windows ‘Start’ button.
OMRON, 2007
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or
transmitted, in any form, or by any means, mechanical, electronic, photocopying, recording, or
otherwise, without the prior written permission of OMRON.
All copyright and trademarks acknowledged.
No patent liability is assumed with respect to the use of the information contained herein. Moreover,
because OMRON is constantly striving to improve its high-quality products, the information
contained in this manual is subject to change without notice. Every precaution has been taken in the
preparation of this manual. Nevertheless, OMRON assumes no responsibility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information contained in
this publication.
Getting Started with CX-Supervisor OMRON
Page iv Revision 2.0
OMRON Getting Started with CX-Supervisor
Revision 2.0 Page v
About this Manual
This manual describes the CX-Supervisor application and its installation.
This manual contains the following:
Getting Started. A description of CX-Supervisor installation and its use for the first time.
Basic Tutorial. A quick guide of use for the first time.
Advanced Tutorial. A detailed step by step tutorial for the key areas.
A Glossary of Terms and Index are also provided.
Warning: Failure to read and understand the information provided in this manual may result in
personal injury or death, damage to the product, or product failure. Please read each
section in its entirety and be sure you understand the information provided in the
section and related sections before attempting any of the procedures or operations
given.
Getting Started with CX-Supervisor OMRON
Page vi Revision 2.0
OMRON Getting Started with CX-Supervisor
Revision 2.0 Page vii
TABLE OF CONTENTS
CX-Supervisor ............................................................................................................... Page
Getting Started with CX-Supervisor ............................................ 1
Welcome to CX-Supervisor........................................................................................... 1
About this Manual ......................................................................................................... 2
System Requirements .................................................................................................... 3
Installing CX-Supervisor ............................................................................................... 4
Copy Protection ............................................................................................................. 4
Starting CX-Supervisor.................................................................................................. 8
Customising CX-Supervisor Settings ............................................................................ 9
The CX-Supervisor Help System................................................................................... 9
Basic Tutorial................................................................................ 11
Advanced Tutorial........................................................................ 25
Glossary of Terms......................................................................... 49
Index............................................................................................... 53
This manual suits for next models
1
Table of contents
Other Omron Software manuals
Omron
Omron CX-MOTION User manual
Omron
Omron ZEN-SOFT01-V4 - 12-2008 User manual
Omron
Omron NS-RUNTIME - SOFTWARE 2007 User manual
Omron
Omron CX-ONE V1.1 - SETUP 11-2005 User guide
Omron
Omron VISION COMPOSER User manual
Omron
Omron CX-SUPERVISOR - SCRIPT REFERENCE REV2.0 User manual
Omron
Omron CX-MOTION-NCF - V1.9 User manual
Omron
Omron SYSMAC Gateway User manual
Omron
Omron CX-Supervisor User manual
Omron
Omron CX-ONE - INTRODUCTION GUIDE Reference manual
Omron
Omron NT - SUPPORT TOOL FOR WINDOWS V4 User manual
Omron
Omron CX-ONE - SETUP 02-2009 User guide
Omron
Omron CX-SERVER LITE User manual
Omron
Omron CX-PROFIBUS User manual
Omron
Omron NS-RUNTIME - SOFTWARE User manual
Omron
Omron ONE SOFTWARE - User manual
Omron
Omron CX-Supervisor User manual
Omron
Omron WS02-CXPC1-V9 - V9 User manual
Omron
Omron THERMOTOOLS User manual
Omron
Omron CX-PROCESS TOOL V5.2 - 12-2009 User manual
