Omron CK3M-CPU1 1 Series User guide
CK3M-CPU11
CK3W-ECS300
Programmable Multi-Axis Controller
Startup Guide
for Serial Encoder
BiSS-C/EnDAT 2.1/2.2/1S Motor
O051-E1-01
• Microsoft, Windows, Windows Vista, Excel, and Visual Basic are either registered trademarks or trademarks of
Microsoft Corporation in the United States and other countries.
• EtherCAT®is registered trademark and patented technology, licensed by Beckhoff Automation GmbH, Germany.
Other company names and product names in this document are the trademarks or registered trademarks of their
respective companies.
Trademarks
Copyrights
NOTE
• All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in
any form, or by any means, mechanical, electronic, photocopying, recording, or otherwise, without the prior
written permission of OMRON.
• No patent liability is assumed with respect to the use of the information contained herein.
Moreover, because OMRON is constantly striving to improve its high-quality products, the information contained
in this manual is subject to change without notice.
• Every precaution has been taken in the preparation of this manual. Nevertheless, OMRON assumes no responsi-
bility for errors or omissions.
Neither is any liability assumed for damages resulting from the use of the information contained in this publication.
• Microsoft product screen shots reprinted with permission from Microsoft Corporation.
• This product incorporates certain third party software. The license and copyright information associated with this
software is available at http://www.fa.omron.co.jp/nj_info_e/.
Sections in this Manual
Sections in this Manual
3
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
1
2
3
Introduction
Device Configuration
Serial Encoder Connection Procedures
1
2
3
4
4Serial Encoder Status and
Error Information
CONTENTS
Sections in this Manual ........................................................................................... 3
Related Manuals....................................................................................................... 5
Revision History....................................................................................................... 6
Terms and Definitions.............................................................................................. 7
Precautions .............................................................................................................. 8
Section 1 Introduction
1-1 Summary.................................................................................................................................1-2
1-1-1 Intended Audience ......................................................................................................................1-2
Section 2 Device Configuration
2-1 Device Configuration.............................................................................................................2-2
Section 3 Serial Encoder Connection Procedures
3-1 Work Flow...............................................................................................................................3-2
3-2 Controller Setting Preparations............................................................................................3-3
3-2-1 Creation of a New Project ...........................................................................................................3-3
3-2-2 Controller Initial Setting ...............................................................................................................3-4
3-3 Serial Encoder Wiring............................................................................................................3-6
3-4 Various Controller Settings and Checking Operation ........................................................3-7
Section 4 Serial Encoder Status and Error Information
4-1 BiSS-C Encoder Error Information.......................................................................................4-2
4-2 EnDAT2.2 Encoder Status and Error Information...............................................................4-3
4-3 1S Motor Encoder Status and Error Information ................................................................4-4
CONTENTS
4Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
Related Manuals
To safely use the system, obtain manuals or user’s guides for devices and equipment that make up
the system, and confirm and understand the precautions related to safety such as “Safety Precau-
tions” and “Precautions for Safe Use”, and other contents of the manuals or user’s guides, including
“Precautions for Correct Use”, before use.
The manuals provided by OMRON Corporation (hereinafter, “OMRON”) and Delta Tau Data Systems
Inc. (hereinafter “DT”) are as shown below.
Manufac-
turer Cat. No. Model Manual name
OMRON O036 CK3M-CPU1£1
CK3W-ECS300
Programmable Multi-Axis Controller Hardware User's Man-
ual
DT O014 --- Power PMAC User's Manual
DT O015 --- Power PMAC Software Reference Manual
DT O016 --- Power PMAC IDE User's Manual
Related Manuals
5
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
Revision History
A manual revision code appears as a suffix to the catalog number on the front and back covers of the
manual.
O051-E1-01Cat. No.
Revision code
Revision
code Date Revised content
01 May 2021 Original production
Revision History
6Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
Terms and Definitions
Term Description and definition
PMAC An acronym for Programmable Multi-Axis Controller.
Power PMAC IDE Computer software that is used to configure the Controller, create user programs,
and perform monitoring.
Serial Encoder An encoder that uses communications to perform data transfer.
Terms and Definitions
7
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
Precautions
• For actual system construction, check the specifications for devices and equipment that make up
the system, use a method with sufficient margin for ratings and performance, and adopt safety cir-
cuits and other safety measures to minimize risks even if a breakdown occurs.
• To safely use the system, obtain manuals or user’s guides for devices and equipment that make up
the system, and confirm and understand the precautions related to safety such as “Safety Precau-
tions” and “Precautions for Safe Use”, and other contents of the manuals or user’s guides, including
“Precautions for Correct Use”, before use.
• The customer themselves must check all regulations, laws, and rules that are applicable to the sys-
tem.
• No part or the whole of this document may be copied, duplicated, or redistributed without the per-
mission of OMRON Corporation.
• The contents of this document are current as of May 2021.
The contents of this document may be subject to change without notice for the purpose of improve-
ment.
Special information in this document is classified as follows:
Precautions for Correct Use
Precautions on what to do and what not to do to ensure correct operation and performance.
Precautions
8Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
1
Introduction
This section provides an introduction of this document.
1-1 Summary......................................................................................................... 1-2
1-1-1 Intended Audience .......................................................................................... 1-2
1-1
Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
1
1-1 Summary
This document summarizes the procedures and confirmation methods for connecting a Serial Encoder
that supports the BiSS-C, EnDAT2.1/2.2, or 1S Motor serial communications protocol with the OM-
RON Programmable Multi-Axis Controller CK3M-CPU1£1 (hereinafter called “Controller”).
Understanding the settings and key points of the setting procedures described in Section 3 Serial En-
coder Connection Procedures on page 3-1, helps you configure the Controller to communicate with
a Serial Encoder that supports each protocol and receive absolute position information.
1-1-1 Intended Audience
This guide is intended for the following personnel, who must also have knowledge of electrical sys-
tems (electrical or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
Also, this guide is intended for personnel who understand the contents described in the DT manual.
1 Introduction
1-2 Startup Guide for Serial Encoder BiSS-C/EnDAT 2.1/2.2/1S Motor (O051)
This manual suits for next models
1
Table of contents
Other Omron Media Converter manuals
Omron
Omron E6A2-C User manual
Omron
Omron E6F-C User manual
Omron
Omron E6F-C User manual
Omron
Omron NT-AL001 User manual
Omron
Omron E6C-N - User manual
Omron
Omron K3FP Series User manual
Omron
Omron E6C3-A User manual
Omron
Omron SYSMAC CS Series User manual
Omron
Omron CK3W-AX2 2 Series User guide
Omron
Omron E6F-A User manual
