Omega Altise AP24MT User manual

AP24MT, AP24ET,

AP15ET, AP10ET

Convection Panel Heaters

Instruction

Manual

omega altise

Important Safety Instructions

1. Disconnect the power plug before dismantling, assembling or before cleaning.

2. Make sure the heater is on a dry and even surface.

3. Always use the heater in an upright position.

4. Do not insert or allow foreign objects to enter any ventilation or exhaust opening, as this may cause an electric

shock, fire or damage to the appliance.

5. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental

capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction

concerning use of the appliance by a person responsible for their safety.

6. Children should be supervised to ensure that they do not play with the appliance.

7. The heater must not be located immediately below a socket-outlet;

8. Do not use this heater in the immediate surroundings of a bath, a shower, or a swimming pool;

9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified

persons in order to avoid a hazard;

10. Do not use your appliance with an extension cord unless it has been checked and tested by a qualified electrician

or electrical supplier.

11. Do not use the appliance for any other purpose than its intended use.

12. Do not position the appliances in close proximately to curtains or other combustible materials. Keep combustible

material such as furniture, cushions, bedding, paper, clothes, curtains etc. at least 1.0m away from the heater.

13. Do not operate in areas where gasoline, paint or other flammable liquids are used or stored.

14. Do not use the appliance in rooms less than 4m2area.

CAUTION: In order to avoid a hazard due to inadvertent resetting of the thermal cutout, this appliance must

not be supplied through an external switching device such as a timer, or connected to a circuit that is

regularly switched on and off by the utility.

WARNING: IN ORDER TO AVOID OVERHEATING, DO NOT COVER THIS HEATER

Read all instructions before using this unit. Keep them for future reference.

omega altise

Specifications

Model AP24MT AP24ET AP15ET AP10ET

Rated Voltage 240V / 50Hz 240V / 50Hz 240V / 50Hz 240V / 50Hz

Watts 2400W 2400W 1500W 1000W

Controls Manual Manual Manual Manual

Thermostat Mechanical Electronic (5-30o) Electronic (5-30o) Electronic (5-30o)

Heating Element Sheathed heating element with aluminium diffuser (safe, silent and long-lasting)

24hr Timer 9999

Wall Mountable 9999

Castors 9999

Safety Features Safety cut-out; Control box

cover; Lockable castors Safety cut-out; Control box

cover; Lockable castors

IP Status IP24 IP24 IP24 IP24

Measurements

(l x h x d mm) 1000 x 440 x 105 1000 x 440 x 105 740 x 440 x 105 580 x 440 x 105

Nett Weight (kg) 8.2 8.0 6.3 4.8

Warranty 7 year repair / replacement 7 year repair / replacement 7 year repair / replacement 7 year repair / replacement

M: mechanical thermostat E: electronic thermostat T: timer

Assembly Instructions

Remove all items of packaging from the panel. As this

convector panel heater is designed to be wall mounted OR

freestanding please follow the below instructions according

to your choice:

TO WALL MOUNT THE PANEL

Where to install the heater?

1. Ensure the safety zones (shown in mm) are kept free

(see Figure 1).

2. The panel convector must not be installed immediately

below a wall socket. The heater must be connected to

a socket outlet or permanent terminal box at least

10cm to one side of the heater (see Figure 2).

3. If the heater is installed in the Bathroom or in a humid

area, the socket outlet or permanent terminal box must

conform to the IP24 requirement (please consult an

electrician for further details).

4. The panel convector must not be installed in a draught

likely to affect the control settings (under a ventilating

fan, etc.)

ure 1.

ure 2.

omega altise

Attaching the wall mounting bracket

What you will need:

1. Screwdriver

2. Pencil/pen to mark the drill holes on the wall

3. Drill

4. 4 x screws for fixing (Suggest 4mm expansion screws

for most installations).

IMPORTANT: Only use the wall mounting bracket supplied

with the unit. For your convenience, the wall mounting

bracket is oriented centrally on the back of the unit.

Figure 3.

1. Loosen the small screw used to fix the wall mounting

bracket to the back of the unit located on the top right

hand side looking from the back. Place to one side.

2. Slide the wall mounting bracket down and away from

the unit.

3. Using the wall mounting bracket as a template for

positioning, place the bracket on the bottom of the wall.

Mark the screw-holes through the holes marked Aand

Bas shown in Figure 3.

4. Raise the bracket so that the holes marked

C and Dare aligned with the marks already made on

the wall in Step 3. Mark the upper holes through holes

E and B as shown in Figure 4. Figure 4.

5. Drill the four holes into the wall as marked. 4mm

expansion screws are suggested for use to secure the

wall-mounting bracket to the wall.

6. The unit can now be hooked onto the wall mounting

bracket through the four slots on the back. Please refer

to the Figure 5.

7. Replace and tighten the small screw used to fix the

wall mounting bracket to the back of the unit.

8. To remove the unit reverse the above steps.

Figure 5.

TO ATTACH THE CASTORS TO USE THE

PANEL AS A PORTABLE HEATER

Parts list

Support (2pcs) Castor (4pcs) Clip (2pcs)

1. Press 2 castors into the bottom of each of the supports

as shown to the right

2. Turn the body of the unit upside down, with the front of

the unit facing away from you.

3. Place the support over the base so that the securing

hooks line up with the grille on the bottom

4. Slide the support towards to front of the unit making

sure that both lines of securing hooks are firmly in

place over the base cut outs.

5. Secure in place with the clip. Some force may be

necessary.

omega altise

Operating Instructions

Preparation

Remove the screw that is used to secure the cover (1)

to the control panel in an anti-clockwise direction.

Switching on the Unit

The unit may be switched on (setting I) or off (setting

O) by using the switch (2) on the right hand side panel.

Heating

Turn the temperature selector (3) clockwise to select

the required temperature. The heater will warm the

room uniformly and quickly. Air enters the heater from

below where it is heated and then exits through the

grid at the top of the heater.

The room temperature can be set between approx.

5 °C and 30 °C. The thermostat switches the heater off

once the set temperature has been reached and

switches on and off intermittently to maintain the

required temperature.

During the first operation, the heater may

give off a smell. Ensure that the room is

well ventilated (for example, open a

window).

Timer setting

Each unit comes with a 24 hour timer (4), which

overrides the heat switches and thermostat. However,

the unit must be connected with the power supply and

switched on for the timer to work.

Manual operation

If you do not wish to use the timer function you must

push all of the time segments towards the centre and

you can manually operate the unit.

If all the time segments are pushed out, the unit will not

operate.

Automatic operation

For the unit to operate automatically, you will need to

have the unit switched on and the current time set. To

do this you will need to rotate the clock face clockwise,

until the correct time is aligned with the indicator arrow

at the top.

NB: The timer’s rotating face acts like a 24 hour

clock. The number 12 is 12pm Noon and the

number 24 represents 12am Midnight.

For times when you wish the heater to switch ON,

push the corresponding time segment towards the

centre. Each time segment represents around 15

minutes, so if you want the heater continuously ON for

2 hours, push 8 segments towards the centre face.

You can set as many ON periods as you like within a

24hr period. These settings will repeat every day until

changed.

When the power is switched OFF, or during a power

failure, the timer will stop functioning. The correct time

must be reset when power is restored.

The clock face turns CLOCKWISE ONLY.

Forcing the clock face in the other

direction will destroy timing gears and

void the product warranty

omega altise

Safety Notes

Control Panel Cover

It is recommended that you use the small screw

provided to secure the control panel cover in place to

avoid children from touching the controls, or random

operation of the unit.

Air outlet

The air outlets must not be obstructed.

For safety reasons the upper and lower air grilles must

never be covered with items such as washing nor

obstructed by items in too close proximity

Objects should not be leant against the unit nor placed

between the unit and the wall.

Never leave combustible materials, such as wood,

paper, textiles or flammable items such as wax, petrol,

aerosol cans etc. in the vicinity of the warm air outlet.

Safety thermal cut-out

The panel convector heater is equipped with a safety

cut-out that switches the heater off if it overheats.

Once the heater has switched off due to overheating,

remove the cause of the fault, e. g. blocked air grids.

When the heater has cooled down for several minutes

it will restart automatically. If the heater then cuts off

again, switch off the heater and call an authorized

serviceman

Care and Maintenance

1. Always disconnect the cord from the electrical

outlet before cleaning the unit.

2. Light accumulated dust may be removed from the

upper and lower grilles with a soft cloth or vacuum

cleaner using the dusting brush attachment.

3. Wipe the exterior surfaces of the unit occasionally

with a cloth moistened (not dripping wet) with a

mild soap solution. Dry the surfaces thoroughly

with a soft dry cloth before operating.

4. Avoid the use of gasoline, benzine, thinner etc as

they may result in damage to the unit.

5. If keeping the unit as a portable heater, please

store the unit in a clean dry place when not in use.

CAUTION! Do not immerse the heater in

water or allow water to drip into the

interior of the heater housing as this

could create a fire or electric shock

hazard.

WARNING! Do not attempt to open or

repair the heater yourself. Doing so

could void the warranty and cause

damage or personal injury.

Omega Altise products are distributed in Australia by MEA,

(A Division of Hagemeyer Brands Australia Pty Ltd)

ABN 28 001 375 686

Locked Bag 4013, Kingsgrove NSW 2208

Phone: 1300 739 033

Fax: 1800 838 899

Email: [email protected]

Web: meaappliances.com.au

This manual suits for next models

Table of contents

Other Omega Altise Heater manuals

Omega Altise

Omega Altise OAPE1800B User guide

Omega Altise

Omega Altise AHCC1800TW User guide

Omega Altise

Omega Altise Elite AE2400 User manual

Omega Altise

Omega Altise ACUBOB User guide

Omega Altise

Omega Altise AHPE222W User guide

Omega Altise

Omega Altise OACHM15B User guide

Omega Altise

Omega Altise OPM15E User manual

Omega Altise

Omega Altise OCT20LR User guide

Omega Altise

Omega Altise OACHB24W User guide

Omega Altise

Omega Altise AHCC2400TB User guide

Omega Altise

Omega Altise OAGCH15 User guide

Omega Altise

Omega Altise OAPE2000B User guide

Omega Altise

Omega Altise OCON203B User guide

Popular Heater manuals by other brands

oventrop

oventrop Regucor Series quick start guide

Blaze King

Blaze King CLARITY CL2118.IPI.1 Operation & installation manual

ELMEKO

ELMEKO ML 150 Installation and operating manual

BN Thermic

BN Thermic 830T instructions

KING

KING K Series Installation, operation & maintenance instructions

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Installation instructions and owner's manual

Well Straler

Well Straler RC-16B user guide

EUROM

EUROM 333299 instruction manual

Heylo

Heylo K 170 operating instructions

Eterna

Eterna TR70W installation instructions

Clarke

Clarke GRH15 Operation & maintenance instructions

IRSAP

IRSAP The Radiator Company Ovali Fitting instructions

Empire Heating Systems

Empire Heating Systems WCC65 Installation and owner's instructions

Wetekom

Wetekom 92 86 43 Original instructions

Desa

Desa SPC170-F owner's manual

Watlow

Watlow Watrod Electric Tubular Heaters Specifications

Haverland

Haverland ECO-DRY GPS Series Instruction & installation manual

Stelpro

Stelpro ASILVC2060 Series user guide