Olympus VS120 User manual

User’s Manual

[Simple Operation]

VS120

Virtual Slide System

Notice

This manual describes simple operating procedures so as the person who uses it for the

first time can use with use.

For detail information, refer to [Hardware] of the attached Instructions and [Online Manual]

of software

After reading this manual carefully, keep it in a safe place.

A X 8 0 3 6

CAUTION

Reproduction, copying or duplication of a part or all of this software and manual is prohibited.

Registered Trademarks

Microsoft, Microsoft Windows are registered trademarks of Microsoft Corporation.

Adobe, Adobe Flash Player are registered trademarks of Adobe Systems Incorporated.

Other brand names and product names are trademarks or registered trademarks of their

respective owners.

Contents

Contents i

1 Acquiring Images 1

1-1 VS120-L100·························································································· 1

1-2 VS120-S5 ··························································································· 11

1-3 VS120-S1 ··························································································· 19

1-4 Setting Focus Logic ········································································· 29

1-5 Changing the Save Location for Acquired Images ······················· 30

2 Databases 31

2-1 Opening Database ············································································ 31

2-2 Registering Images··········································································· 32

2-2-1 2-2-1 Registering Image Files on a Hard Disk Drive ······································ 32

2-2-2 Registering Image Files after Viewing ···························································· 33

2-3 Setting Permission for Images························································ 34

2-4 Viewing Images················································································· 35

3 Using Scan Projects 36

3-1 Saving Scan Projects ······································································· 36

3-2 Roading Scan Projects····································································· 36

Acquiring Images / VS120-L100

Page

1 Acquiring Images

1-1 VS120-L100

This section describes how to acquire images of several slide glasses by using the automatic transport function.

For this purpose, the following modes are available:

Quick Batch: It is to acquire images automatically without making precise settings.

When this mode is selected, follow procedures in the sections whitch carry (Quick Batch) marks

on top of the sections.

Expert Batch:It is to acquire images by setting the scanning area (XY) and focus.

When this mode is selected, follow procedures in the sections whitch carry (Expert Batch)

marks on top of the sections.

1 Starting Up the System (Quick Batch) (Expert Batch)

First, turn on the monitor , followed by the

microscope control box , slide loader , and

controller to start up the system.

After the system has started up, double click the

[VS-ASW] icon on the desktop to start up the

software and begin adjustment of the stage.

Acquiring Images / VS120-L100

2 Page

2 Placing a Slide Glass (Quick Batch) (Expert Batch)

Place slide glasses in the cassette.

Before placing slide glasses in the cassette,

wipe the glasses free of dust, etc.

Open the cassette cover of the slide loader.

Place the cassette in the designated part of the

loader.

Close the cassette cover of the slide loader.

Acquiring Images / VS120-L100

Page

3 Selecting Scan Mode (Quick Batch) (Expert Batch)

Select on the upper right of the screen.

Click or .

After clicking the button, do not open or close

the cassette cover.

The locations where the slide glasses have been

placed are detected.

Acquiring Images / VS120-L100

4 Page

4 Setting Slide Glass Information (Quick Batch) (Expert Batch)

Set information for each slide glass if necessary. It is possible to acquire the image

without setting any information.

Click the slide.

If you do not need to set slide glass information for

the slide, go to step .

Enter slide glass information.

Click to select the next slide.

Repeat steps and for all the slides for

which you need to set slide glass information.

Click .

Acquiring Images / VS120-L100

Page

5 Selecting the Objective Lens (Quick Batch) (Expert Batch)

Click the Objective Lens button that you want to

use.

(The check mark appears on the selected

objective lens button.)

To change the optional settings, go to step below.

If you do not need to change the optional settings, go to

step .

To capture the image in Z mode, click (Scan one

Z plane) button and then click [Virtual Z].

For more information, refer to the online help.

If you are using a database, you can set the location for

saving captured images to the hard disk drive (default)

or database.

To save captured images to the database, refer to

Section “1-5 Changing the Save Location for Acquired

Images” (page 30).

Click .

The [More Options] window appears.

Change the necessary settings in the [More

Options] window and click .

Click (Apply settings to all slides of all

cassettes).

The slides to which the settings have been

assigned turns yellow.

Acquiring Images / VS120-L100

6 Page

6 Acquiring an Overview Image (Expert Batch)

When setting is complete, click

(The 2x objective lens is used for scanning.)

Avoid movement or vibration of the system

during scanning of overview images.

Other manuals for VS120

Table of contents

Other Olympus Microscope manuals

Popular Microscope manuals by other brands

Thermo Scientific

Thermo Scientific Nicolet iN10 Using

National

National DC3-163 instructions

KERN Optics

KERN Optics OPE-1 User instructions

OPTIKA MICROSCOPES

OPTIKA MICROSCOPES B-150D Operation manual

Prior

Prior Lux POL operating instructions

Opitec

Opitec Smartscoop 115615 instructions

KERN

KERN OPO-1 operating instructions

Topcon

Topcon SP-1P user manual

Motic

Motic PA43 Operation manual

Leica

Leica DVM5000 Setup manual

MshOt

MshOt MZ62 user manual

KERN Optics

KERN Optics OZR-5 User instructions

VWR

VWR VisiScope 384 Series instruction manual

Nikon

Nikon ECLIPSE E200 POL instructions

Leica

Leica DI C800 User's manual & installation instructions

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

ThermoFisher Scientific

ThermoFisher Scientific Continuµm manual

Leica

Leica FL560 user manual