Olympus TG-2 User manual

DIGITAL CAMERA

Instruction Manual

TG-2

ƔThank you for purchasing an Olympus digital camera. Before you start to use your new camera, please

read these instructions carefully to enjoy optimum performance and a longer service life. Keep this

manual in a safe place for future reference.

ƔWe recommend that you take test shots to get accustomed to your camera before taking important

photographs.

ƔIn the interest of continually improving products, Olympus reserves the right to update or modify

information contained in this manual.

Checking the contents of the box

Digital camera Strap Lithium Ion

Battery

(LI-90B)

USB-AC adapter

(F-2AC)

USB cable

(CB-USB8)

OLYMPUS Setup

CD-ROM

Lens ring

Names of Parts

1Connector cover

Connector cover lock

LOCK knob

Speaker

5Multi-connector

6HDMI micro connector

7Strap eyelet

8Self-timer lamp/LED Illuminator/

AF illuminator

9Flash

Lens

Lens ring

Tripod socket

Battery/card cover

Battery/card cover lock

Other accessories not shown: Warranty card

Contents may vary depending on purchase location.

1Stereo microphone

2GPS antenna

3Monitor

4 Shutter button

5Indicator lamp

6 nbutton

7 Zoom buttons

8Rbutton (shooting movies)

9 Mode dial

qbutton (switching between

shooting and playback)

Arrow pad

INFO (changing information display)

#(ash)

Y(self-timer)

(erase)

Abutton (OK)

button

Attaching the camera strap

123

Pull the strap tight so that it does not come

loose.

Arrow pad

H(left)

G(down)

F(up)

I(right)

FGHI instruct to press the up/down/left/right

arrow pad.

Inserting and removing the

battery and card (commercially

available)

1 Follow Steps 1, 2and 3to

open the battery/card cover.

Battery/card cover

Battery/card

cover lock

LOCK knob

Turn off the camera before opening the battery/

card cover.

2 Insert the battery while sliding the

battery lock knob in the direction

of the arrow.

Battery lock knob

Insert the battery as illustrated with the Cmark

toward the battery lock knob.

Damage to the battery exterior (scratches, etc.)

may produce heat or an explosion.

Slide the battery lock knob in the direction of the

arrow to unlock, and then remove the battery.

3 Insert the card straight until it

clicks into place.

Write-protect

switch

Always use SD/SDHC/SDXC/Eye-Fi/FlashAir

(with Wireless LAN function) card with this

camera. Do not insert other types of memory

cards. “Using the card” (p. 79)

ƔDo not touch the metallic parts of the card directly.

To remove the card

Press the card in until it clicks and comes out slightly,

then remove the card.

4 Follow Steps 1, 2and 3 to

close the battery/card cover.

When using the camera, be sure to close and

lock the battery/card cover.

Charging the battery

Connect the USB cable and USB-AC adapter to the

camera and charge the battery.

For charging the battery abroad, see “Using your

charger and USB-AC adapter abroad” (p. 79).

ƔThe battery is not fully charged at shipment. Before

use, be sure to charge the battery until the indicator

lamp turns off (up to 4 hours).

Connecting the camera

AC outlet

USB cable

(supplied)

Connector cover

Multi-connector

LOCK knob

Connector cover

lock

Indicator lamp

On: Charging

Off: Charged

When to charge the batteries

Charge the battery when the error message shown

below appears.

Battery Empty

Error message

Flashes in red

Never use any cable other than supplied or

Olympus-designated USB cable. This may cause

smoking or burning.

The included F-2AC USB-AC adapter (hereafter

referred to as USB-AC adapter) differs

depending on the region where you purchased

the camera. If you received a plug-in type USB-

AC adapter, plug it directly into AC outlet.

The included USB-AC adapter has been

designed to be used for charging and playback.

Do not take pictures while the USB-AC adapter

is connected to the camera.

Be sure to unplug the power plug of the USB-AC

adapter from the wall outlet when the charging is

complete or the playback ends.

For details on the battery, see “Battery Handling

Precautions” (p. 98). For details on the USB-AC

adapter, see “USB-AC adapter” (p. 99).

ƔIf the indicator lamp does not light, check the USB

cable and USB-AC adapter connections.

ƔThe battery can be charged while the camera is

connected to the computer via USB. The charging

time varies depending on the performance of the

computer. (There may be cases in which it takes

approx. 10 hours.)

Turning on the camera and

making the initial settings

When you turn on the camera for the rst time, a

screen appears enabling to set the language for the

menus and messages displayed in the monitor, and

the date and time.

To change the selected date and time, see “Setting

the date and time d[X]” (p. 49).

1 Press the nbutton to turn

on the camera, press FGHI

of the arrow pad to select your

language and press the Abutton.

2 Press FG of the arrow pad to

select the year for [Y].

Back

Y/M/D

Y M D Time

-- -- -- --

:..

2013

Date and time setting

screen

3 Press Iof the arrow pad to save

the setting for [Y].

Back

Y/M/D

Y M D Time

-- -- -- --

:..

2013

4 As in Steps 2 and 3, press

FGHI of the arrow pad to

set [M] (month), [D] (day), [Time]

(hours and minutes), and [Y/M/D]

(date order), and then press the

Abutton.

For precise time setting, press the Abutton as

the time signal strikes 00 seconds.

5 Press HI of the arrow pad to

select time zone and then press

the Abutton.

ƔUse FG to turn daylight saving time

([Summer]) on or off.

’13.02.26 12:30 Back

Summer

Seoul

Tokyo

Before Using GPS

The camera’s GPS (Global Positioning System)

feature determines your position (latitude and

longitude) and stores this information with pictures

taken with the camera.

The camera uses supplementary orbital data

(assisted GPS or A-GPS) for improved signal

acquisition.

A-GPS data must be updated every 14 days.

Before using GPS, you will need to set the camera

clock to the correct date and time. (p. 49)

Updating A-GPS Data

1 Install the update software

(OLYMPUS A-GPS Utility).

ƔDownload the update software from the

following website and install it on your

computer.

http://sdl.olympus-imaging.com/agps/

The update software can also be installed from

the supplied PC software.

2 Connect the camera to the

computer and launch the update

software.

“Connecting with a computer”

(p. 56)

ƔOnce the software has started, follow the

on-screen instructions.

Using GPS

1 Select [On] for [GPS Settings] >

[GPS] in the d(Settings Menu 3)

tab. (p. 55)

ƔOnce the camera has determined the position,

=and location coordinates will appear in

the display.

0:340:34

ORM

GPS

0.00.0

AUTO

ISO

AUTO

ISO

4:3

>Blink: Searching GPS signal

=Light: Receiving GPS signal

ƔThe camera may take a few minutes to determine

position after a period of disuse.

If the icon is still ashing after several minutes,

the camera is probably having difculty detecting

a signal. Move to an unobstructed outdoor area or

otherwise change your location.

2 Press INFO button in the shooting

display.

ƔThe displays change in the order of Normal ĺ

Detailed ĺNo info. ĺMeasurement position

information each time F(INFO) is pressed.

ƔNearby landmarks in the GPS database will

be displayed.

---------

Updated 1 min ago

2013/02/26

12:30

Latitude/Longitude

N123°56' 78''

E123°56' 78''

Barometer

877hpa

Altitude/Water Depth

1200m

LOG

Back

Update GPS

1Landmark name

2Landmark information

position

3Electronic compass

4Update status

5GPS tracking active

6Latitude

7Longitude

8Atmospheric/

Hydraulic pressure

9Altitude/Water depth

0Current date and

time

HI Select a landmark.

AUpdate GPS data.

ƔSome countries or regions may regulate the use of

GPS devices. Follow all local regulations.

ƔTurn GPS off when on board aircraft and in other

locations in which the use of GPS devices is

prohibited.

ƔThe provision of A-GPS data may be terminated

without prior notice.

ƔPosition data may be unavailable or contain errors

in the following locations:

ƔLocations without a clear view of the sky

(indoors, underground or underwater, or near

trees or tall buildings)

ƔLocations subject to strong magnetic or radio

interference (near high-voltage power lines,

magnets, electronic devices, or cell phones

operating in the 1.5 GHz band)

ƔGPS data may take more time acquire or be

unavailable in some locations or at certain times

of day.

ƔDo not cover the GPS antenna with your hands or

metal objects.

ƔIf the battery is low, the camera cannot acquire

GPS data while the camera turns off.

ƔThe camera is not equipped for GPS navigation.

ƔWhile [Track] is [On], the GPS receiver will

continue to draw power from the battery when the

camera is off.

ƔGPS data are not recorded with movies.

ƔPress the INFO button while the camera is turned

off. The current time and the shooting location are

displayed for approx. 30 seconds.

Learning how to use the

camera

ƔPress the nbutton to turn on the camera and

enter the standby mode. (Press the nbutton

again to turn off the camera.)

ƔSelect the shooting mode, and press the shutter

button to shoot a still image.

ƔTo shoot a movie, press the Rbutton.

ƔSet the shooting functions using the function

menu or the setup menu.

ƔTo view images, press the qbutton to switch to

playback mode.

ƔTo return to standby mode, press the qbutton

again, or press the shutter button halfway down

and then release it.

ƔPress and hold the qbutton while the camera is

turned off to start up the camera in the playback

mode.

ƔIn this case, pressing the qbutton again sets

the camera to the standby mode.

Shooting still images

1 Press the nbutton to turn on

the camera.

2 Select the shooting mode. (p. 14)

3 Hold the camera and compose the

shot.

When holding the camera, take care not to cover

the ash, microphone or other important parts

with your ngers, etc.

Take care so that the ash window is not

exposed to ngerprints or dirt.

Press and hold Abutton to brighten the monitor

when there is difculty in seeing the monitor. The

monitor brightness returns to the default setting if

no operations are performed for 10 seconds.

Other manuals for TG-2

Table of contents

Other Olympus Digital Camera manuals

Olympus

Olympus FE 115 - Digital Camera - 5.0 Megapixel Installation guide

Olympus

Olympus FE-5000 Instruction Manual

Olympus

Olympus E-M1 Installation guide

Olympus

Olympus E-PL3 User manual

Olympus

Olympus CAMEDIA C-460 Zoom User manual

Olympus

Olympus TG-320 User manual

Olympus

Olympus D-360 R User manual

Olympus

Olympus Stylus 1040 User manual

Olympus

Olympus CAMEDIA C-350ZOOM User manual

Olympus

Olympus AZ-1 ZOOM User manual

Olympus

Olympus 262064 User manual

Olympus

Olympus FE-25 Instruction Manual

Olympus

Olympus Camedia D-100 User manual

Olympus

Olympus CAMEDIA C-470 Zoom Installation guide

Olympus

Olympus SP 310 - Digital Camera - 7.1 Megapixel Installation guide

Olympus

Olympus SP 320 - Digital Camera - 7.1 Megapixel User manual

Olympus

Olympus E-PL1 Setup guide

Olympus

Olympus OM-10 User manual

Olympus

Olympus 80 - Stylus 80 Quartz Date 35mm Camera Assembly instructions

Olympus

Olympus AZ-1 ZOOM User manual

Olympus

Olympus TG-620 User manual

Olympus

Olympus Stylus 840/ 840 User manual

Olympus

Olympus D-450 Zoom User manual

Olympus

Olympus VG-120 Setup guide

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Nikon

Nikon COOLPIX A Reference manual

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions