Olivetti Explor 200XS User manual
Web Cash
Explor@ 200XS-300XS
SERVICE MANUAL
Code XZAC4074
PUBLICATION ISSUED BY:
Olivetti S.p.A.
Documentazione
77, Via Jervis - 10015 Ivrea (Italy)
Copyright © 2006 Olivetti
All rights reserved.
Printed in Italy at:
INDEX
1. OVERVIEW................................................................................................................................................ 1-1
1.1 INTRODUCTION............................................................................................................................. 1-1
1.2 THE SYSTEM.................................................................................................................................. 1-2
1.2.1 System – Front panel....................................................................................................... 1-3
1.2.2 System – Rear panel........................................................................................................ 1-3
1.2.3 System – View of the inside............................................................................................. 1-4
1.2.4 System – Full view ........................................................................................................... 1-5
1.3 MOTHERBOARD ............................................................................................................................ 1-7
1.3.1 Motherboard connectors .................................................................................................. 1-8
1.3.1.1 Block diagram of motherboard connectors .................................................... 1-9
1.3.2 Motherboard jumpers ..................................................................................................... 1-10
1.3.2.1 Jumper JP1 – Compact Flash Master/Slave Setting ..................................1-10
1.3.2.2 Jumper JP5 – CMOS Operating Mode Setting...........................................1-10
1.3.2.3 Jumper JP9 – Power Mode Setting............................................................. 1-10
1.3.2.4 Jumper JP10 – CPU Frequency Setting...................................................... 1-10
1.3.2.5 Jumpers JP7 – JP8 – CPU Voltage Setting.................................................1-10
1.3.2.6 Jumper JP6 – LCD ID Setting......................................................................1-11
1.4 FRONT PANEL I/O BOARD.......................................................................................................... 1-12
1.4.1 Front panel I/O board connectors .................................................................................. 1-12
1.5 REAR PANEL I/O BOARD ............................................................................................................ 1-13
1.5.1 Rear panel I/O board connectors................................................................................... 1-13
1.5.2 Jumpers rear panel I/O board ........................................................................................ 1-14
1.5.2.1 Jumper JP1 – COM1/COM2/ Cash Drawer DC Power Setting ...................1-15
1.5.2.2 Jumper JP2 – COM3/COM4/ DC Power Setting ......................................... 1-15
1.5.2.3 Jumpers JP3 – JP4 – USB DC Power Setting............................................. 1-15
1.6 TOUCH SCREEN BOARD............................................................................................................ 1-16
1.6.1 Touch screen board connectors..................................................................................... 1-16
1.7 INVERTER BOARD....................................................................................................................... 1-16
1.7.1 Inverter board connectors ..............................................................................................1-16
1.8 BADGE READER (FIELD OPTION).............................................................................................. 1-17
1.8.1 Badge reader board ....................................................................................................... 1-17
1.8.2 Badge reader board connectors..................................................................................... 1-17
1.9 TECHNICAL DATA........................................................................................................................ 1-18
1.10 TROUBLESHOOTING................................................................................................................... 1-20
1.10.1 System errors................................................................................................................. 1-20
1.10.2 Peripheral errors............................................................................................................. 1-21
1.11 CONTROL PROCEDURES........................................................................................................... 1-23
1.11.1 Hard Disk control............................................................................................................ 1-23
1.11.2 Power supply control...................................................................................................... 1-25
1.11.3 RAM control.................................................................................................................... 1-26
XZAC4074 Service Manual III
2. INSTALLATION......................................................................................................................................... 2-1
2.1 INTRODUCTION............................................................................................................................. 2-1
2.1.1 General warnings............................................................................................................. 2-1
2.2 UNPACKING THE SYSTEM ........................................................................................................... 2-1
2.3 INSTALLATION OF THE HARDWARE...........................................................................................2-2
2.3.1 Rear panel........................................................................................................................ 2-2
2.3.2 Front panel....................................................................................................................... 2-2
2.4 INSTALLATION OF THE CUSTOMER DISPLAY (FIELD OPTION) .............................................. 2-3
2.5 INSTALLATION OF THE BADGE READER (FIELD OPTION)....................................................... 2-4
2.6 INSTALLATION OF THE SECOND DISPLAY (FIELD OPTION).................................................... 2-5
2.7 BIOS ................................................................................................................................................ 2-6
2.8 INSTALLAZIONE DRIVER.............................................................................................................. 2-6
2.8.1 List of available drivers..................................................................................................... 2-6
2.9 UTILITY............................................................................................................................................ 2-8
2.9.1 Cash drawer controller test utility..................................................................................... 2-9
2.9.2 M.S.R Card Reader Utility – Test program .................................................................... 2-10
2.9.3 Customer pole display.................................................................................................... 2-14
3. PART DISASSEMBLY/REASSEMBLY.................................................................................................... 3-1
3.1 INTRODUCTION............................................................................................................................. 3-1
3.2 REMOVAL OF THE CABLE COVER .............................................................................................. 3-2
3.3 REMOVAL OF THE REAR COVER................................................................................................3-3
3.4 REMOVAL OF THE HARD DISK ....................................................................................................3-5
3.5 REPLACEMENT OF THE POWER SUPPLY UNIT........................................................................ 3-6
3.6 REMOVAL OF THE POWER SUPPLY UNIT COOLING FAN........................................................ 3-7
3.7 REPLACEMENT OF THE CD-ROM PLAYER ................................................................................ 3-8
3.8 REMOVAL OF THE MOTHERBOARD COVER.............................................................................. 3-9
3.9 REPLACEMENT OF THE RAM .................................................................................................... 3-10
3.10 REPLACEMENT OF THE CPU..................................................................................................... 3-11
3.11 DISASSEMBLY OF THE MOTHERBOARD.................................................................................. 3-13
3.12 REPLACEMENT OF THE LOUDSPEAKERS............................................................................... 3-16
3.13 REPLACEMENT OF THE INVERTER BOARD ............................................................................ 3-17
3.14 REPLACEMENT OF THE TOUCH SCREEN BOARD.................................................................. 3-18
3.15 REPLACEMENT OF THE I/O BOARD (BACK)............................................................................. 3-19
3.16 REPLACEMENT OF THE I/O BOARD (FRONT).......................................................................... 3-20
3.17 REMOVAL OF THE BADGE READER (FIELD OPTION)............................................................. 3-22
3.18 DISASSEMBLY OF THE BADGE READER BOARD ................................................................... 3-23
3.19 REMOVAL OF THE LCD DISPLAY AND OF THE TOUCH SCREEN ......................................... 3-24
3.19.1 Removal of the touch screen ......................................................................................... 3-26
3.19.2 Removal of the LCD display........................................................................................... 3-28
IV XZAC4074
FOREWORD
This manual is intended for technicians responsible for installing and servicing Explor@ 200XS –300XS
systems. It provides all the information necessary for correct product maintenance.
SUMMARY
This manual comprises the following chapters.
• Chapter 1 provides general information about the system.
• Chapter 2 describes the installation procedures.
• Chapter 3 describes the disassembly and reassembly operations necessary to service the product.
PRE-REQUISITES
The approach to the topics covered in this manual requires knowledge of similar products.
REFERENCES
Spare parts catalogue Explor@ 200XS - cod. XZAC3839
Spare parts catalogue Explor@ 300XS - cod. XZAC3840
Product Support Plan Explor@ 200XS – cod. XZAC3841
Product Support Plan Explor@ 300XS – cod. XZAC3842
DISTRIBUTION: General
FIRST EDITION: January 2007
XZAC4074 Service Manual V
VI XZAC4074
XZAC4074 Service Manual 1-1
1. OVERVIEW
1.1 INTRODUCTION
The system described in this manual is a web cash able to operate as stand-alone or integrated in complex
architectures.
The main requirements of the reference environment include high level customization of retail and
management activities and, generally, highly flexible configuration of the appliances for insertion in the
management system.
The system uses a PC type architecture with standard operating system that permits use of specialized front
store or back-office packages. This module manages the operator interface and setting of the sales commands
sent to the fiscal module (if any) to carry out management or data transfer operations towards auxiliary devices
which may be integrated or external to the product. In the basic configuration, the operator interface consists of
the integrated LCD display, with touch screen device. Other peripherals or other I/O devices may be integrated
according to the type of operativity of the specific environment.
Figure 1-1
Figure 1-2
BASE
MODULE
OPERATOR DISPLAY WITH
TOUCH SCREEN
BADGE READER
BASE MODULE
1-2 XZAC4074
1.2 THE SYSTEM
The Explor@ 200XS-300XS system has been designed so that all the components necessary for system
functioning (CPU, RAM and various boards) are located immediately behind the LCD display module with
touch screen. The rear cover of the module must be removed in order to operate on these components.
The I/O interfaces are located in the front panel (USB and CD-ROM player) and in the rear panel which is
accessed, after removing the box, by lifting the protective cover, as shown in the figure below.
Figure 1-3
Figure 1-4
Figure 1-5
BASE
MODULE
REAR PANEL
FRONT PANEL
XZAC4074 Service Manual 1-3
1.2.1 System – Front panel
Figure 1-6
1.2.2 System – Rear panel
Figure 1-7
ON/OFF BUTTON
USB 2.0
CD-ROM
LPT COM4 VGA
MAINS SUPPLY
KEYBOARD/MOUSE COM1 COM2 COM3
USB 24V POWER
USB 12V POWER
LAN
CASH DRAWER
POWER SUPPLY
UNIT FAN
1-4 XZAC4074
IDE1/2
1.2.3 System – View of the inside
Figure 1-8
FAN, HEAT
SINK,
CPU
RAM
MOTHER
BOARD
This manual suits for next models
1
Table of contents
