OKM FS Future Series User manual
FS Future Serie
®
FS-Thermoscan
8
User’s manual
User’s manual: FS-Thermoscan 2
Any information contained in these operating instructions may be changed without prior notice.
OKM does not make any warranty for this document. This also applies without limitation to implied assurances
of merchantability and fitness for a specific purpose. OKM does not assume any responsability for errors in this
manual or for any incidental or consequential damage or loss associated with the delivery, exploitation or usage
of this material.
This documentation is available ”as presented“ and without any kind of warranty. In no circumstances OKM
takes responsibility for lost profits, usage or data losts, interruption of business activities or all kind of other
indirectly damages, which developed because of errors in this documentation.
This instruction manual and all other stored media, which are delivered with this package should only be used for
this product. Program copies are allowed only for security- and savety purposes. The resale of these programs,
in original or changed form, is absolutely forbitten.
This manual may not be copied, duplicated or translated into another language, neither in part nor completely,
over the copyright matters without the prior written consent of OKM.
Copyright
©
2002 – 2007 OKM Ortungstechnik GmbH. All rights reserved.
OKM Ortungstechnik GmbH
www.okm-gmbh.de
Contents 3
Contents
1 Preface 5
2 Technical Specifications 6
2.1 Control Unit ...................................... 6
2.2 Laser Pointer ...................................... 6
2.3 Measurement Readings ................................. 7
3 Scope of Delivery 8
4 Controls 9
4.1 Complete View ..................................... 9
4.2 Front View ....................................... 10
5 Usage 11
5.1 Calibration ....................................... 11
5.2 Usage as stand-alone device .............................. 12
5.3 Usage as optional equipment to eXp 4000 ...................... 13
5.3.1 Thermograph .................................. 14
5.3.2 Thermo Scan .................................. 15
6 Maintenance and Services 17
OKM Ortungstechnik GmbH
www.okm-gmbh.de
User’s manual: FS-Thermoscan 4
List of Figures
1 Scope Of Delivery ................................... 8
2 Complete View ..................................... 9
3 Front View ....................................... 10
4 Schema of the thermal distribution of cavities .................... 11
5 Measurement with FS-Thermoscan .......................... 12
6 Temperature sequence of a measurement on the hillside .............. 13
7 The operating modes Thermograph and Thermo Scan of eXp 4000 . . . . . . . . 13
8 The Operating Mode Thermograph On The eXp 4000 ............... 14
9 Measurement with eXp 4000 and connected FS-Thermoscan ............ 15
List of Tables
1 Technical Specification (Control Unit) ........................ 6
2 Technical Specification (Laser Pointer) ........................ 6
3 Technical Specification (Measurement Readings) .................. 7
4 Scope Of Delivery ................................... 8
OKM Ortungstechnik GmbH
www.okm-gmbh.de
1 Preface 5
1 Preface
Dear customer,
in the first instance we want to thank you that you made your decision on a product of OKM
Ortungstechnik GmbH.
With our team of specialists we guarantee that our products are under recurrent control. Our
specialists try to implement new developments in terms of further quality improvements for you.
Of course by selling our products we cannot guarantee that you really make a find during your
research. The recognition of hidden objects and structures depends on a hugh number of factors
- like you know. Determining factors are the dielectricity constant of the ground, the grade of
mineralisation and the dimensions of an object relating to its depth. Specially in very wet soil,
clay and sand with high conductivity of the ground, recording of the measured results can be
falsified strongly.
With this product you purchased a device which stood the tests in regular operation like all
other products of us. If you are interested in where our devices have gone into action please
visit our homepage.
For our company it is necessary that we protect our developments within the framework of exist-
ing legislation to a patent or trademark registration. Therewith we offer you a higher warranty
while using our products.
Please take your time consecutively, read this user‘s manual and familiarize yourself with the
utilisation and operation of this FS-Thermoscan.
OKM Ortungstechnik GmbH
www.okm-gmbh.de
User’s manual: FS-Thermoscan 6
2 Technical Specifications
The following technical indications are medial values. During operation small variations are
quite possible.
2.1 Control Unit
Dimensions (L x W x H) ............................................... 35 x 12 x 22 cm
Weight .................................................................... about 0,9 kg
Voltage ........................................................................ 12 VDC
Operating Temperature .................................................... 0
– 50
Storage Temperature ..................................................... -20
– 60
Air Humidity ............................................................... 5% – 75%
Waterproof ......................................................................... No
Table 1: Technical Specification (Control Unit)
2.2 Laser Pointer
Laser Class ............................................... 2 (according to EN 60 825-1)
Range ...................................................................... up to 50 m
Wave Length ............................................................. 630 – 680 nm
Maximum Output ............................................................ <1 mW
Table 2: Technical Specification (Laser Pointer)
OKM Ortungstechnik GmbH
www.okm-gmbh.de
2 Technical Specifications 7
2.3 Measurement Readings
Optimal Surface Temperature ............................................. 10
– 25
Distance / Spot Size Ratio ........................................................ 8 : 1
Field Of View (Flare Angle) ........................................................ 7 ◦
Resolution ...................................................................... 0,01
Temperature Difference (min. amplification) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Temperature Difference (max. amplification) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Table 3: Technical Specification (Measurement Readings)
OKM Ortungstechnik GmbH
www.okm-gmbh.de
User’s manual: FS-Thermoscan 8
3 Scope of Delivery
In the following section you can find all standard equipment. The scope of delivery can be dif-
ferent in some circumstances because of some optional accessories which should not be included
in the basic equipment.
1 FS-Thermoscan (Control Unit)
1 External Power Supply
1 Charger For External Power Supply
1 Adapter For External Power Supply
1 User Manual
1 Carrying Case
Table 4: Scope Of Delivery
Beware that pictures in this manual could be different to delivered parts.
FS-Thermoscan (Control Unit)
External Power Supply
Charger For
External Power Supply
Adapter for
External Power Supply
Figure 1: Scope Of Delivery
OKM Ortungstechnik GmbH
www.okm-gmbh.de
4 Controls 9
4 Controls
4.1 Complete View
In figure 2FS-Thermoscan is shown with all its components.
Temperature
Sensor
Analog Display
Handhold
Laser Pointer
Connecting Plug To
External Power Supply Or eXp 4000
Figure 2: Complete View
The Handhold is used to hold the device during the measurement.
On the Analog Display all measured values are visible.
The Laser Pointer marks the position of the recording of the measured value, if activated.
With the Connecting Plug to External Power Supply Or eXp 4000 you can connect the device to an eXp
4000 or via the Adapter Cable to an external battery. You have the possibility to use the device
as a stand-alone unit without any additional devices.
OKM Ortungstechnik GmbH
www.okm-gmbh.de
User’s manual: FS-Thermoscan 10
4.2 Front View
The figure 3shows the front side of the device with all available operating elements.
Analog Display
Regulator Of
Calibration
Power On And Off Button
For Laser Pointer
Regulator Of
Sensibility
Figure 3: Front View
The Power On And Off Button For Laser Pointer is used to switch off and on the laser pointer, which
is situated on the upper side of the control unit. With its help it is possible to do accurate
measurements.
Via the Analog Display the current measure value is represented. The deflection of this display
depends on the adjustment of the calibration and the sensitivity. Further information about the
calibration of the FS-Thermoscan you can find in section 5.1 on page 11.
By using the Regulator Of Calibration you can adjust the indicator of the analog display to the center.
By using the Regulator Of Sensibility you can adjust the range of values of the measurement. So the
device can be aligned to the current temperature differences.
OKM Ortungstechnik GmbH
www.okm-gmbh.de
Other manuals for FS Future Series
4
This manual suits for next models
1
Table of contents
Other OKM Metal Detector manuals
OKM
OKM FS Future FS-Reflexion User manual
OKM
OKM PULSE NOVA User manual
OKM
OKM EVOLUTION NTX User manual
OKM
OKM FS Future Series User manual
OKM
OKM PULSE NOVA User manual
OKM
OKM Fusion User manual
OKM
OKM Future Series User manual
OKM
OKM ROVER C4 User manual
OKM
OKM FS Future Series User manual
OKM
OKM Fusion User manual
Popular Metal Detector manuals by other brands
Steinberg Systems
Steinberg Systems SBS-MD-12 user manual
GOLDEN MASK
GOLDEN MASK 5 user guide
Grizzly
Grizzly YM 203 manual
Fisher Research Labs
Fisher Research Labs 1280-X Aquanaut operating manual
Treasure Cove
Treasure Cove Vibra-Probe 560 quick guide
Accurate Locators
Accurate Locators XL16 IMAGER user guide