Oki ES3640eMFP User manual
Read Me First!
Changing the Inverter Unit
for use with the 4-Tray Finisher
The inverter unit comes configured for the 5-tray
finisher option.
If you have the 4-tray version of the finisher
option, you must change the inverter unit before
installing the finisher:
X
Inverter as supplied
Y
Inverter changed for use with 4-tray finisher.
Orientation:
Front Back
1. Remove the two bottom caps:
a.Turn the inverter over, then remove the
screws securing the bottom caps on either
side of the inverter.
b.Remove the end caps and store them
along with the four screws in case you
ever need to convert the unit back.
2. Turn the inverter around and remove the
screws holding the metal brackets in place.
Keep the screws and brackets handy: they
are used to help secure the extension plate
once it is repositioned.
3. Turn the inverter around and remove the two
screws holding the extension plate. Keep
them handy to reattach the plate once it is
repositioned.
4. Pull forward on the extension plate to
disengage the pins from the top channel
stops, then slide it down into the inverter
and push back to engage the pins on the
bottom channel stops.
5. Reattach the extension plate using the
screws you removed earlier.
6. Turn the inverter over and install the
brackets as illustrated below.
7. You are now ready to install the 4-tray
finisher. See the Finisher Unit Installation
Guide:
© 2005 Oki Data Americas, Inc. 58374301
Other manuals for ES3640eMFP
15
This manual suits for next models
3
Other Oki Printer Accessories manuals
Oki
Oki MPS3537mc Series User manual
Oki
Oki CX 1145 MFP User manual
Oki
Oki B8300n Use and maintenance manual
Oki
Oki B 6100 User manual
Oki
Oki B710dn Assembly instructions
Oki
Oki C3530n MFP Instruction Manual
Oki
Oki ML520n User manual
Oki
Oki C9200 Quick reference guide
Oki
Oki B4400 Series User manual
Oki
Oki 7300 User manual
