OIC Korea R4N Series User manual
Installation and User's Guide
Video Wall Solution
R4N SERIES
USER
MANUAL
<All contents of this document may change without prior notice, and actual product appearance may differ from that depicted herein>
R11 2
[ USER MANUAL ]
LCD Display Monitors
Two-Year Limited
Warranty
Orion Images Corporation (“OIC”) warrants to the first purchaser that its LCD Display monitors are free from defects in materials
and workmanship under normal use. The warranty is two years beginning on the date of invoice, as further described in the
following text.
During the first 30 days of the warranty period, OIC will exchange the product without charge to the purchaser. After 30 days, OIC
will offer the repair of devices only up to the conclusion of the two-year warranty period. OIC may, at OIC’s sole option, use
rebuilt, recondition, new parts or components when repairing any device.
To request warranty service, you must call OIC’s Customer Service at (714) 766-6300, ext. 121 within the warranty period.
If warranty service is required, OIC will issue a Return Material Authorization Number. You must ship the products back to OIC
in their original or equivalent packaging, prepay shipping charges and insure the shipment or accept the risk of loss of damage
during shipment. OIC will ship the repaired or replacement products to you freight prepaid if you use an address in the
continental U.S. or Canada, where applicable. All other locations will require shipping costs to be covered by the purchaser.
This warranty does not cover:
1. Damage due to shipping and external causes, including accident, abuse, misuse, problems with electrical power, servicing not
authorized by OIC, usage not in accordance with product instructions, failure to perform required prevent maintenance,
problems caused by use of parts and components not supplied by OIC, act of God, tampering or normal wear and tear;
2. Products on which the serial number has been altered, defaced, or removed;
3. Products purchased
outside the United States and Canada;
4. Products whose back covers have been opened, replaced, modified, or show signs of tampering both physically or electrically.
OIC MAKES NO EXPRESS WARRANTIES BEYOND THOSE STATED IN THIS WARRANTY STATEMENT. OIC DISCLAIMS ALL OTHER
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. SOME STATES (OR JURISDICTIONS) DO NOT ALLOW LIMITATIONS ON IMPLIED
WARRANTIES, SO THIS LIMITATION MAY NOT APPLY TO YOU.
OIC’S RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS LIMITED TO REPAIR AND REPLACEMENT AS SET
FORTH IN THIS WARRANTY STATEMENT. THESE WARRANTIES GIVE YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE
OTHER RIGHTS WHICH VERY FROM STATE TO STATE (OR JURISDICTION TO JURISDICTION).
OIC DOES NOT ACCEPT LIABILITY BEYOND THE REMEDIES SET FORTH IN THIS WARRANTY STATEMENT OR LIABLITY FOR
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION ANY LIABILITY FOR PRODUCTS NOT BEING
AVAILABLE FOR USE.
SOME STATES (OR JURISDICTION) DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE PROCESSDING EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU.
These provisions apply to OIC’s limited two-year warranty only. For provisions of any service contract covering your systems,
refer to the separate service contract that you will receive.
R11 3
[ USER MANUAL ]
<TABLE OF CONTENTS>
1 SAFETY INSTRUCTION 4
2 FCC RF INTERFERENCE STATEMENT 8
3 INSTALLATION 9
4 OSD MENU SETTING 15
5 SPECIFICATION 23
6 R4N COMMANDER (Video Wall Control Protocol) 27
7 TROUBLESHOOTING 38
8 LIMITED WARRANTY 38
R11 4
[ USER MANUAL ]
•Follow this safety instruction to use the monitor properly and prevent the damage.
•Keep this user’s guide book for later use.
1. SAFETY INSTRUCTION
* This safety instruction has “Warning” & “Caution” as below
Warning - If the user does not follow this instruction,
it may cause the serious damage to the user.
Caution - If the user does not follow this instruction, it may cause the slight
damage to the user or cause some damages to the monitor.
Warning
Never remove the back cover and touch
the inside of the monitor.
If you need a service, please contact the
service center.
Keep away the monitor from the
direct sunlight and a heating appliance.
Never put objects of any kind into this
product as they may result in a risk of fire
or electric shock.
Connect the power cord to the wall
outlet tightly. If the power cord or plug are
defective and the wall outlet is not
tight, please do not use them.
R11 5
[ USER MANUAL ]
Warning
Do not install this monitor on the outside
and near water. It may cause damage to
the product, electric shock and fire.
When lightning and thundering, unplug
the monitor from the wall outlet and
never touch it.
Unplug this product from the wall outlet,
when it does not operate for a long time.
When smoking and noising from the
monitor, unplug the product from the wall
outlet and contact a service center.
WARNING : How to fix
Do not open this product as it contains high voltage inside.
It may create an electric shock.
If the user disassembles and remove the back cover, it does not make sure
to make up for the damage and do a service and exchange the monitor.
For cleaning do not use liquid cleaners.
Never touch the power plug with wet-
hands.
R11 6
[ USER MANUAL ]
Cautions
Install this monitor some distance
from the wall and do not install unless
proper ventilation is provided.
Place this product on a stable place.
If not, it may fall, causing serious
damages to the monitor and people.
The openings must not be blocked by
curtain, rug or other similar surface.
Before carrying the monitor, turn it off and
unplug the signal cables and the power
cord from the wall outlet.
When carrying this monitor, be careful
not to damage the panel and drop it
It may cause some trouble.
Take the power plug out from the wall
outlet.
Do not pull the cable. It may snap the
inner-wires and cause overheating and fire.
R11 7
[ USER MANUAL ]
Cautions
Install this monitor about 50cm far from
the eyes and an angle of 0~15 degrees
below eyes. Too close installation may
cause having weak sight.
Do not press the LCD panel with hands or
the sharpened material hardly.
For cleaning, unplug the monitor from the
wall outlet. Do net use the liquid cloth.
Use the soft cloth.
Do not use the chemical liquid for cleaning.
It may cause fading and breakage.
WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT EXPOSE
THIS EQUIPMENT TO RAIN OR WATER.
Instructions for Disposal of Electrical and Electronic Equipment in Private Households
Disposal of used Electrical and Electronic Equipment
(Applicable in the European Union and other European countries with garbage separate
disposal and collection methods)
This symbol on the product, or in the related documents in the package, indicates that this
product shall not be treated as normal household waste. Instead, it should be taken to a proper
applicable collection point or depot for the recycling of electrical and electronic equipment.
By ensuring this product is disposed of correctly, you will help prevent possible negative consequences for
the environment and human health, which could otherwise be caused by inappropriate waste handling of
this product. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this product, please contact your local city authority,
your household waste disposal service or the place where you purchased the product.
R11 8
[ USER MANUAL ]
NOTE
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures.
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio, TV technician for help.
- Only shielded interface cable should be used.
Finally, any changes or modifications to the equipment by the user not expressly approved by the grantee or
manufacturer could void the users authority to operate such equipment.
DOC COMPLIANCE NOTICE
This digital apparatus does not exceed the Class A limits for radio noise emissions from digital apparatus set out
in the radio interference regulation of Canadian Department of communications.
2. FCC RF INTERFERENCE STATEMENT
R11 9
[ USER MANUAL ]
3.1 UNPACKING
Remove the package cover and place the product on a flat and secure surface or in the installation location.
This equipment should be unpacked and handled with care. If an item appears to have been damaged
in shipment, notify the shipper immediately. Check whether all the following device and accessories are
included with the main system. If any items are missing, notify your Sales or Customer Service Representative.
3.2 PARTS
3. INSTALLATION
LCD Monitor &
Keypad
UTP Cable DP Cable HDMI Cable
Joint Bracket(2EA) &
BHMS M4x8 BK(8EA)
User ManualRemote ControllerBattery
Power Cable
Serial Cable(M/F Straight cable)
R11 10
[ USER MANUAL ]
3.3 KEYPAD
1) KEYPAD CONTROLLER
OSD KEY FUNCTION
On/Off the OSD menu or exit the source selection menu
Move the cursor the choose on the OSD menu
Select the source on the INPUT menu
Move up the cursor to choose on the OSD menu
Activate the auto adjustment of RGB source
Return to normal mode from power saving mode
Control down the OSD menu or move to the previous menu
Volume down
Select the OSD menu
Control up on the OSD menu
Volume up
Turn the power ON or OFF. There will be a few seconds delay before the display appears.
The power LED(next the power switch) lights with green when the power is turned ON.
The power is turned off by pressing the power switch again and power LED goes red.
This KEYPAD is attached to a magnet, so you can freely paste
If you want to replace with a longer cable Please purchase separately
UTP Cable (1.5m)
KEYPAD
*Depending on the product model type, there may be variations in appearance.
This manual suits for next models
7
Table of contents
