oGrow OG03AL86-BKE User manual
OGrow Walk-in 6' x 8'
LAWN AND GARDEN
GREENHOUSE
With Heavy Duty Aluminium Frame
MODELS#
MANUAL VERSION # 2
OG03AL86-BKE
OGAL-866
Thank you for purchasing the OGROW™ greenhouse
Follow the assembly and safety instructions in this manual.
If you have any questions, please contact our Customer Service Department
Let's
Grow
Together!
Parts List.........................................
Side Walls.......................................
Back Wall........................................
Front Wall.......................................
Door Frame...................................
Roof and Full Structure.............
The Door.........................................
The Vents........................................
The Panels......................................
3-4
8
10
12
14
15
17
19
21
•
•
•
•
•
•
•
•
•
PAGE 2
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
PART# PART NAME PART
IMAGE QTY
4
1
1
1
1
1
1
1
1
6
6
1
4
1
1
1
Corner Beam
Front Right Roof Beam
Front Left Roof Beam
Rear Right Roof Beam
Rear Left Roof Beam
Right Doorway Support
Left Doorway Support
Rear Support Pole- Left
Rear Support Pole- Right
Side Support Pole
Roof Support Pole
Top Doorway Beam
Corner Bracket
Door Rail
Vent Support Bar
Rear Floor Bar
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
PART# PART NAME PART
IMAGE QTY
1
2
1
1
1
1
6
2
1
2
1
2
1
2
1
2
Front Floor Bar
Vent Stopper
Vertical Door Rail Support
Left Door Support
Rear Horizontal Support
Diagonal Support
Front Horizontal Support
Top Door Bar
Center Door Bar
Bottom Door Bar
Vent Side Bar
Door Slider
Front Diagonal Support
Vent Top Bar
Side Floor Bar
(Including Rollers)
PARTS LIST
PAGE 3
Right Door Support
20
PAGE 4
(See page 21)
PARTS LIST
32
33
34
39
40
41
42
43
44
PART# PART NAME PART
IMAGE QTY.
1
2
97
16
6
142
8
4
1
Top Roof Bar
Side Ceiling Plate
Bolt
Door Screw
Vent Screw
Panel Clip
Beam End Cap
Gutter End Cap
Long Door Support Bolt
45
47
48
49
50
51
52
A-I
PART# PART NAME PART
IMAGE
1
2
1
98
1
1
1
23
Door Frame Spacer
Spanner Wrench
Vent Brace
Nut
Vent Bottom Bar
Rail End Cap- Right
Rail End Cap- Left
Polycarbonate Panel
QTY.
NOTICE:
Read the entire IMPORTANT SAFETY INFORMATION section
at the beginning of this document – including all text under subheadings
– before set up or use of this product.
PLEASE RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
KEEP THEM IN A SAFE PLACE WHERE YOU CAN REFER TO THEM AS NEEDED.
The warnings, precautions, and instructions discussed in this manual cannot cover all possible
conditions and situations that may occur. The user must understand that common sense and
caution are factors which cannot be built into this product, but must be supplied by the user.
Assembly/Installation Precautions
1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. We recommend
that two people together assemble the greenhouse for a smooth and efficient assembly.
3. This unit contains pieces with sharp edges. The machined edges of the aluminium parts and the
ends of the panel clips may be sharp. Handle all parts carefully.
4. Keep assembly area clean and well lit.
5. Keep bystanders out of the area during assembly.
6. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
8. Build the Greenhouse on a flat and level surface. A concrete foundation is recommended for a
high-quality installation.
9. WARNING: The brass bushings inside the Rollers of this product contain lead, a chemical known
to the State of California to cause birth defects (or other reproductive harm). (California Health &
Safety Code § 25249.5, et seq.)
IMPORTANT SAFETY INFORMATION
Use/Service Precautions
1. This product is not a toy. Do not allow children to play in or climb on this product. Although this
greenhouse does include protective covers, there are still some exposed sharp edges. In addi-
tion, protective covers may fall off over time. Children must be supervised if allowed near the
greenhouse.
2. SNOW/DEBRIS ACCUMULATION HAZARD. The heavy weight of accumulated snow or other debris
can cause parts of this greenhouse to buckle suddenly. Do not allow debris to accumulate on
top of the greenhouse. If snowfall is expected, place additional supports (not provided) under-
neath the Crown (32). NEVER enter a greenhouse with accumulated debris on top.
3. Use as intended only. The product capabilities only apply to a properly and completely assembled
product.
4. Inspect periodically; replace damaged parts immediately and do not enter greenhouse if parts
are loose or damaged.
!
PAGE 5
•Before you assemble this greenhouse, you must build a proper foundation. You may use your
own base of bricks, concrete blocks or treated wood. Whatever foundation you use, ensure that
it is square – by checking that its diagonal measurements are equal – and level, and that the
greenhouse is fastened to it securely. If you have made your own base, you will need to drill
through the sill of the greenhouse.
Your greenhouse needs the proper support of a foundation to help prevent property damage and
injury in the event of strong winds or inclement weather. Wind and ground conditions vary from
site to site, and the characteristics of your site may affect the practicality and effectiveness of
anchoring methods substantially. If you have any doubt regarding the stability of the foundation
you are to use, consult a professional.
•It is always your responsibility to ensure that the greenhouse is properly anchored. Ogrow cannot
be held responsible for personal injury, damage to the greenhouse, or other property damage
that occurs as a result of improperly anchoring the greenhouse.
•Check with local authorities to obtain all required building permits and to familiarize yourself
with any building codes that may apply.
•Decide on a location for the greenhouse. The location should optimally be a level, well lit area
that is sheltered from the wind and free of overhanging branches. The door of the greenhouse
should not open towards the prevailing wind, if possible. Try to locate your greenhouse near a
convenient water source to aid you in watering your plants daily. Also, try to build your
greenhouse in a location where the soil drains easily so that the greenhouse floor is pleasant to
work on.
IMPORTANT:
READ THE FOLLOWING CAREFULLY BEFORE PROCEEDING:
!
PAGE 6
STARTING TO BUILD
Construct a base first so that the greenhouse can be immediately mounted and secured when it
is completed.
Find someone to assist you in the assembly. The work is light and should suit any able-bodied
person, who can speed up and ease assembly by assisting you.
Note that the construction takes time. Work slowly and methodically so that assembly is more
accurate and with fewer errors; rushing only leads to needing to undo and repeat steps done
erroneously. If this is your first time building a greenhouse it may take a good chunk of a day to
complete the construction properly.
Prepare the tools you will need:
• A Drill
• A Screwdriver
• A Spanner – Part 47
Lay out all the greenhouse parts around the base to ensure that nothing is missing. (See image
below.) If any parts are missing, contact us at once so that we can send you the missing parts
right away.
When you assemble the greenhouse, secure parts loosely where possible and then tighten only
when everything is in place. This allows for easy minor adjustments during construction.
GETTING READY
PAGE 7
BACK WALL
FRONT WALL SIDE WALL
SIDE WALL
VENTS ROOF DOOR
PAGE 8
STEP
2
STEP
6
STEP
4
STEP
3
STEP
5
Lay out all the parts needed for the side wall, following the layout shown below. The grooves in the
PART 1 – SIDE WALLS
ASSEMBLIN G T HE GREENHOUS E
Part# Part Name Part Image Qty.
10
22
31
33
34
49
Side Support Pole
Diagonal Support
Side Floor Bar
Gutter Bar
Bolt
Nut
6
4
2
2
24
24
33
10
10
10
31
22
22
43 52
Slide three bolts into the groove of
the support poles part 10.
STEP
1
Bolt the support poles to the
outside of the floor bar.
STEP
2
Bolt the bottom of the diagonal
support poles to the inside of the
floor bar.
STEP
3
STEP
5
STEP
4
Follow the steps below to assemble the Side Walls.
NOTE: Each step applies to all relevant wall supports.
Repeat the above steps to make the second side wall.
43 5243 52
34 49 34 49
10
34 34
49 49
31 31
10
22
33
PAGE 9
Bolt the top of the side support
poles to the outside of the gutter
bar.
Bolt the top of the diagonal support
poles to the inside of the
gutter bar.
Use the extra bolt in the outer
support poles to attach the
diagonal support poles across
the outer support poles.
STEP
6
34 49
22
10
33
22
10
Lay out all the parts needed for the back wall, following the layout shown below. Make sure that
PART 2 – BACK WALL
ASSEMBLINGT HE GREENHOUS E
16
9
8
21
05
04
22
1
1
22
13
13
Part# Part Name Part Image Qty.
1
4
5
8
9
13
21
22
34
49
Corner Beam
Rear Right Roof Beam
Rear Left Roof Beam
Rear Support Pole- Left
Rear Support Pole- Right
Corner Bracket
Rear Horizontal Support
Diagonal Support
Bolt
Nut
2
1
1
1
1
2
1
2
16
16
PAGE 10
STEP
6
STEP
2
STEP
1 & 5
STEP
3
STEP
4
This manual suits for next models
1
Other oGrow Greenhouse Kit manuals
oGrow
oGrow OGAL-46A User manual
oGrow
oGrow Walk-in OGAL-466 User manual
oGrow
oGrow OGAL-CF23 User manual
oGrow
oGrow OGAL-466A User manual
oGrow
oGrow Walk-in OGAL-666 User manual
oGrow
oGrow OGAL-866 User manual
oGrow
oGrow OG6834-S User manual
oGrow
oGrow OG03-PE5565E User manual
oGrow
oGrow OGAL-666A User manual
oGrow
oGrow OGAL-46 User manual
Popular Greenhouse Kit manuals by other brands
ACD PRESTIGE
ACD PRESTIGE MR3 H manual
Vitavia
Vitavia VA0040-TRP Assembly instructions
VegTrug
VegTrug Nursery manual
Riverstone Networks
Riverstone Networks Monticello 041315V Assembly instructions
STC
STC Easy Grow 6x12 Greenhouse Assembly instructions
CLIMA POD
CLIMA POD Spirit V7 Series Assembly instructions
