NXP Semiconductors RD710 User manual

AN10992

Quick Startup Guide for RD710

Rev. 2.0 —

3 August 2011

198120

Application

note

COMPANY PUBLIC

Document information

Info

Content

Keywords

RD710, RD852, Quick startup guide, SAM AV1, SAM AV2, RC523,

RX852

Abstract This document is intended for new users to start working with the Design-

In Kit. It shows the basic functionality with MIFAREdiscover.

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

2 of 45

Contact information

For additional information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddr[email protected]om

Revision history

Rev

Date

Description

2.0

20110803

Extended usecases for MIFAREdiscover

1.1

20110712

Update due to release of new usecases of MIFAREdiscover

1.0 20110411 Initial version

20110105 Draft version

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

3 of 45

1. Introduction

The purpose of this document is to provide a set of guidelines to aid in the first operation of

the RD710 reader. The MIFAREdiscover (ver.3.x.x) will be used as a user interface to

communicate to the readers and cards, respectively.

The USB drivers are included in the CD package.

2. Installation

2.1 Required items

To use the MIFAREdiscover, the following items are required:

•MIFARE cards as MIFARE DESFire EV1, MIFARE Classic, MIFARE Ultralight

•Pegoda Reader (RD710 or RD710 as part of EV710) (see [32] – [36])

•MIFAREdiscover (see [37])

oPublic version available on NXP web (see [39])

oFull version (see [40])

2.2 Installing USB driver for the Reader

The demonstrated installation is shown on Windows 7, but it is the same in Windows XP and

Vista.

1)If you don’t have a CD that was delivered with your Pegoda, open your web browser, go to

see [38] and download and extract the zip file.

2)Connect the Pegoda RD710 with your computer.

3)Wait until Windows 7 installs a standard driver.

4)Open the Windows Device Manager and navigate to the installed Reader (see figure 1

below)

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

4 of 45

Fig 1. Device Manager

5)Click Smartcard Reader with the right mouse button and choose “Properties”.

6)Choose the tab driver and click “Update Driver”.

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

5 of 45

Fig 2. Update Driver

7)Windows will ask you how to search for the driver. Choose “Browse my computer for driver

software”.

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

6 of 45

Fig 3. Browse Computer

8)Choose “Browse”, navigate to the root directory of the CD or the previous extracted

content and click “Next”.

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

7 of 45

Fig 4. Browse for driver software on your computer

9)Wait until Windows has finished the installation.

Fig 5. Installing driver software

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

8 of 45

Fig 6. Finished installation

10) The installation is done.

2.3 Deactivate Smart Card Interface

For some customers it may be useful to deactivate the Smart Card Interface. This is

especially important for users of Windows 7. If you see that Windows repeatedly tries to

install a new Smart Card Interface you need to do the following steps.

1. Go to the Control Panel of your computer (Start – Control Panel)

2. Click “System” – “Device Manager” and then “Other devices”

3. Click “Smart Card” with your right mouse button and then disable.

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

9 of 45

Fig 7. Deactivate Smart Card Interface

2.4 Installing MIFAREdiscover

There are two different versions of MIFAREdiscover; for once the full version can be retrieved

from the doc store and the public version, which can be downloaded from the NXP

Homepage.

The public MIFAREdiscover supports the functions for MIFARE Classic (see [1]) MIFARE

Ultralight (see [13]), General ISO 14443-A (see [8]) protocol handling.

The full MIFAREdiscover supports the functions for MIFARE SAM AV2 (see [18]-[31]) support

(X and conventional), MIFARE Plus (see [5]) MIFARE DESFire EV1 (see [4]), MIFARE

Classic, MIFARE Ultralight, MIFARE Ultralight C (see [6]) and General ISO14443-A protocol

handling.

2.4.1 System Requirements

•Microsoft Windows XP SP2 or higher

•Minimum screen resolution 1024x768 pixels

•Microsoft .NET Framework 3.5 Service Pack 1 or higher [will be installed along with this

installer]

•Pegoda

•MIFARE SAM AV2 for X-mode

NXP Semiconductors

AN10992

Quick Startup Guide for RD710

AN10992

All information provided in this document is subject to legal disclaimers.

Application note

COMPANY PUBLIC

Rev. 2.0 — 3 August 2011

198120

10 of 45

2.4.2 Installation process

Install Microsoft .NET Framework 3.5 SP1 (or higher if available)

The Installer "SetupMIFAREdiscover" tries to install the Microsoft .NET Framework 3.5

Service Pack 1 by using a Net-Installer. If you have limited or no network connection to

download and install the Microsoft .NET Framework the setup process is terminated and

you have to install the Microsoft .NET Framework manually.

.NET Framework can be found online (see [41])

Install the "SetupMIFAREdiscover" package:

Install the package and follow the instructions. The whole installation process requires

administration rights. After you have successfully installed the program "MIFAREdiscover"

and all of its required components you can start "MIFAREdiscover" via the link

"Start -> All Programs -> NXP Semiconductors -> MIFAREdiscover -> MIFAREdiscover".

Read “ReleaseNotes.txt” file that you received with the MIFAREdiscover package.

Table of contents

Other NXP Semiconductors Computer Hardware manuals

NXP Semiconductors

NXP Semiconductors MCF5253 User manual

NXP Semiconductors

NXP Semiconductors HVP-56F80748-UM User manual

NXP Semiconductors

NXP Semiconductors LX2160ARDBGSG User manual

NXP Semiconductors

NXP Semiconductors PowerQUICC MPC8308_RDB User manual

NXP Semiconductors

NXP Semiconductors QorIQ LX2160A User manual

NXP Semiconductors

NXP Semiconductors I2C Bus AN11022 User manual

NXP Semiconductors

NXP Semiconductors JN5148 User manual

NXP Semiconductors

NXP Semiconductors FRDM665SPIEVB User manual

NXP Semiconductors

NXP Semiconductors UM11620 User manual

NXP Semiconductors

NXP Semiconductors i.MX 8M Installation manual

NXP Semiconductors

NXP Semiconductors MCIMX8QM-CPU User manual

NXP Semiconductors

NXP Semiconductors Qorivva MPC5643L User manual

NXP Semiconductors

NXP Semiconductors MCIMX93-EVK User manual

NXP Semiconductors

NXP Semiconductors MX93AUD-HAT-UM User manual

NXP Semiconductors

NXP Semiconductors freescale MC92604 User manual

NXP Semiconductors

NXP Semiconductors K32W061 User manual

NXP Semiconductors

NXP Semiconductors UM11650 User manual

NXP Semiconductors

NXP Semiconductors FRDM-K32L2A4S User manual

NXP Semiconductors

NXP Semiconductors UM11596 User manual

NXP Semiconductors

NXP Semiconductors TWR-PXS2010 User manual

NXP Semiconductors

NXP Semiconductors MCIMX93-EVKCM User manual

NXP Semiconductors

NXP Semiconductors MCU-Link Pro User manual

NXP Semiconductors

NXP Semiconductors MCU-SMHMI-HDUG User manual

NXP Semiconductors

NXP Semiconductors FRDM-MCXN947 User manual

Popular Computer Hardware manuals by other brands

EMC2

EMC2 VNX Series Hardware Information Guide

Panasonic

Panasonic DV0PM20105 Operation manual

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 user manual

Gigabyte

Gigabyte B660M DS3H AX DDR4 user manual

Raidon

Raidon iT2300 Quick installation guide

National Instruments

National Instruments PXI-8186 user manual

Hauppauge

Hauppauge WinTV-HVR-2250 Quick installation guide

Kontron

Kontron CP6002 user guide

Manhattan

Manhattan 702843 user manual

Aphex

Aphex 230 instruction manual

AMD

AMD Phenom II Product data sheet

Intel

Intel NUC 12 Pro user guide

dbx

dbx Zone Pro 1260 user manual

Galaxy

Galaxy GHDX2-2430S-24F4D Installation and hardware reference manual

Intel

Intel AXXRMFBU4 Quick installation user's guide

Kontron

Kontron DIMM-PC/MD product manual

ST X-NUCLEO-SAFEA1B How to use

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 installation manual