Nuvoton NUTINY-SDK-M051 User manual

NuTiny-SDK-M051 User’s Manual

For NuMicro M051™Series

The information described in this document is the exclusive intellectual property of

Nuvoton Technology Corporation and shall not be reproduced without permission from Nuvoton.

Nuvoton is providing this document only for reference purposes of NuMicro™microcontroller based system design. Nuvoton

assumes no responsibility for errors or omissions.

All data and specifications are subject to change without notice.

For additional information or questions, please contact: Nuvoton Technology Corporation.

Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

1Overview .....................................................................................................3

2NuTiny-SDK-M051 introduction.......................................................................3

2.1 NuTiny -SDK-M051 Jumper Description ....................................................................4

2.2 Pin Assignment for Extended Connector....................................................................5

2.3 NuTiny-SDK-M051 PCB Placement...........................................................................5

3How to start NuTiny -SDK-M051 on the Keil uVision®IDE...................................6

3.1 Keil uVision®IDE Software Download & Install ..........................................................6

3.2 Nuvoton Nu-Link Driver Download & Install...............................................................6

3.3 Hardware Setup....................................................................................................6

3.4 Smpl_NuTiny-M051 Example Program......................................................................7

4How to start NuTiny-SDK-M051 on the IAR Embedded Workbench.......................8

4.1 IAR Embedded Workbench Software Download &Install ..............................................8

4.2 Nuvoton Nu-Link Driver Download & Install...............................................................8

4.3 Hardware Setup....................................................................................................8

4.4 Smpl_NuTiny-M051 Example Program......................................................................9

5M052_TINY-EVB Schematic .......................................................................... 10

6To Download NuMicro™Family Releated Files From Nuvoton Company............... 11

6.1 To Download NuMicro™Keil uVision®IDE driver...................................................... 11

6.2 To Download NuMicro™IAR EWARM driver .............................................................. 12

6.3 To Download NuMicro™M051 series BSP Software Library ........................................ 13

7Revision History.......................................................................................... 13

Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

1Overview

NuTiny-SDK-M051 is the specific development tool for NuMicro M051™series –M052/M054/M058/M0516. Users can

use NuTiny-SDK-M051 to develop and verify the application program easily.

NuTiny-SDK-M051 includes 2 portions. One is M052_Tiny-EVB and the other is Nu-Link-Me. M052_Tiny-EVB is

evaluation board and Nu-Link-Me is its Debug Adaptor. Thus, users do not need additional ICE equipment.

2NuTiny-SDK-M051 introduction

NuTiny-SDK-M051 can support NuMicro M051™series. Figure 2-1 is NuTiny-SDK-M051 for M051 series and the left

portion is called M052-TINY-EVB and the right portion is Debug Adaptor called Nu-Link-Me.

M052-TINY-EVB is similar to other development board. Users can use it to develop and verify applications to emulate

the real behavior. In fact, the real chip M0516LAN is mounted on the board. The on board chip covers M052, M054 and

M058’s features. The M052_Tiny-EVB can be a real system controller to design user target system.

Nu-Link-Me is a Debug Adaptor. The Nu-Link-Me Debug Adaptor connects your PC's USB port to your target

system (via Serial Wired Debug Port) and allows you to program and debug embedded programs on the target

hardware. To use Nu-Link-Me Debug adaptor with Keil or IAR Please refer to “Nuvoton NuMicro™IAR ICE driver user

manual “ or Nuvoton NuMicro™Keil ICE driver user manual” in detail.

Figure 2-1 NuTiny-SDK-M051 (Green Color PCB Board)

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

2.1 NuTiny -SDK-M051 Jumper Description

2.1.1 Power Setting

zJP2: VCC5 Voltage connecter in M052_TINY-EVB

zJ2: USB port in Nu-Link-Me

POWER model J1 USB port J2 USB port JP2 VCC5 MCU Voltage

Model 1 X Connect to PC DC 5V output DC 5V

Model 2 X X DC 2.8-5.5V input Voltage by VCC input

X: Not use.

2.1.2 Debug Connector

zJP4: Target ICE Connector in M052_TINY-EVB

zJP8: Nuvoton ICE Connector in Nu-Link-Me

2.1.3 USB Connecter

zJ1: mini USB Connecter in M052_TINY-EVB

zJ2: mini USB Connecter in Nu-Link-Me

2.1.4 Extended Connecter

zJP1, JP5, JP6 and JP7: Show all of chip pins in M052_TINY-EVB

2.1.5 Reset Button

zSW1: Reset button in M052_TINY-EVB

2.1.6 Power Connecter

zJP2: VCC connecter in M052_TINY-EVB

zJP3: GND connecter in M052_TINY-EVB

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

2.2 Pin Assignment for Extended Connector

M052_TINY-EVB provides M0516LAN on board and the extended connector for LQFP-48 pin. Table

2-1 is the pin assignment for M0516LAN.

Pin No Pin Name Pin No Pin Name

01 MOSI_0,AIN5,P1.5 25 P2.5,AD13,PWM5

02 MISO_0,AIN6,P1.6 26 P2.6,AD14,PWM6

03 SCLK0,AIN7,P1.7 27 P2.7,AD15,PWM7

04 /RST 28 P4.4,/CS

05 P3.0,RXD 29 P4.5,ALE

06 AVSS 30 P4.6,ICE_CLK

07 P3.1,TXD 31 P4.7,ICE_DATA

08 P3.2,/INT0,STADC 32 P0.7,AD7,SCLK1

09 P3.3,/INT1,MCLK 33 P0.6,AD6,MISO_1

10 P3.4, T0,SDA 34 P0.5,AD5,MOSI_1

11 P3.5,T1,SCL 35 P0.4,AD4,/SS1

12 P4.3,PWM3 36 P4.1,PWM1

13 P3.6,/WR,CKO 37 P0.3,AD3,RTS0

14 P3.7,/RD 38 P0.2,AD2,CST0

15 XTAL2 39 P0.1,AD1,RTS1

16 XTAL1 40 P0.0,AD0,CTS1

17 VSS 41 VDD

18 LDO_CAP 42 AVDD

19 P2.0,AD8,PWM0 43 P1.0,AIN0,P1.0

20 P2.1,AD9,PWM1 44 P1.1,AIN1,T3

21 P2.2,AD10,PWM2 45 P1.2,AIN2,RXD1

22 P2.3,AD11,PWM3 46 P1.3AIN3,TXD1

23 P2.4,AD12,PWM4 47 P1.4,AIN4,/SS0

24 P4.0,PWM0 48 P4.2,PWM2

Table 2-1 pin assignment for M0516LAN

2.3 NuTiny-SDK-M051 PCB Placement

Users can refer Figure 2-2 for the NuTiny -SDK-M051 PCB placement.

Figure 2-2 NuTiny-SDK-M051 PCB Placement

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

3How to start NuTiny -SDK-M051 on the Keil uVision®IDE

3.1 Keil uVision®IDE Software Download & Install

Please connect to Keil company website (http://www.keil.com) to download the Keil uVision®IDE and install the

RVMDK.

3.2 Nuvoton Nu-Link Driver Download & Install

Please connect to Nuvoton company NuMicro™website ( http://www.nuvoton.com/NuMicro ) to download “NuMicro™

Keil uVision®IDE driver” file. Please refer the Chapter 6.1 for the detail download flow. When the download had

finished, please unzip the file and execute the “Nu-Link_Keil_Driver.exe” to install the driver.

3.3 Hardware Setup

The hardware setup is shown as Figure 3-1

Figure 3-1 NuTiny-SDK-M051 Hardware Setup

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

3.4 Smpl_NuTiny-M051 Example Program

This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-M051 board.

The example can be found on the Figure 3-2 list directory.

Directory Project File

Figure 3-2 Smpl_NuTiny-M051 Example Directory

To use this example:

Start uVision

Open the Smpl_NuTiny-M051.uvproj project file

Project-Open

Compile and link the Smpl_NuTiny-M051

application

Project - Build

Program the application into on-chip Flash ROM

Flash – Download

The LED will toggle on the M052_TINY-EVB board.

Start debug mode

Using the debugger commands, you may:

Single step through code

Run the application\

Review variables in the watch window

Reset the device to re-run the application

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK-M051 User’s Manual

4How to start NuTiny-SDK-M051 on the IAR Embedded Workbench

4.1 IAR Embedded Workbench Software Download &Install

Please connect to IAR company website (http:// www.iar.com) to download the IAR Embedded Workbench and install the

EWARM.

4.2 Nuvoton Nu-Link Driver Download & Install

Please connect to Nuvoton company NuMicro™ website ( www.nuvoton.com/NuMicro) to download “NuMicro™IAR

ICE driver user manual” file. Please refer the 6.2 for the detail download flow. When the download had finished, please

unzip the file and execute the “Nu-Link_IAR_Driver.exe” to install the driver.

4.3 Hardware Setup

The hardware setup is shown as Figure 3-1

Figure 4-1 NuTiny- SDK-M051 Hardware Setup

Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.Downloaded from Arrow.com.

NuTiny-SDK User’s Manual

4.4 Smpl_NuTiny-M051 Example Program

This example demonstrates the ease of downloading and debugging an application on a NuTiny-SDK-M051 board.

The example can be found on the Figure 3-2 list directory. (Samples code can be download from Nuvoton website)

Directory Project File

Figure 4-2 Smpl_NuTiny-M051 Example Directory

To use this example:

Start IAR Embeded Workbench

Open the Smpl_NuTiny-M051.eww workspace file

File-Open-Workspace

Compile and link the Smpl_NuTiny-M051

application

Project - Make

Program the application into on-chip Flash ROM

Project – Download and Debug

The I/O will toggle on the M052_TINY-EVB board.

NuTiny-SDK-M051 User’s Manual

5M052_TINY-EVB Schematic

CB1

0.1u

C0603

DAVDD

R11

10K

0805R

KPT-2012

KP-2012 NET2

VCC

PIN13

M052 LQFP 48

NCU120_LQFP_48

AIN1/T2/P1.1 44

AIN2/RXD1/P1.2 45

AIN3/TXD1/P1.3 46

AIN3/SS0/P1.4 47

P4.2 48

MOSI_0/AIN5/P1.5

MISO_0/AIN6/P1.6

SCLK0/AIN7/P1.7

VSS

LDO_CAP

P2.0/AD8/PWM0

P2.1/AD9/PWM1

P2.2/AD10/PWM2

P2.3/AD11/PWM3

P2.4/AD12/PWM4

P4.0

P2.6/AD14/PWM6 26

P4.6/ICE_CLK 30

P4.7/ICE_DAT 31

P0.7/AD7/SCLK1 32

P0.6/AD6/MISO_1 33

P0.5/AD5/MOSI_1 34

P0.4/AD4/SS1 35

P4.1 36

P0.3/AD3/RTS0 37

P0.2/AD2/CTS0 38

P0.1/AD1/RTS1 39

RST

RXD/P3.0

AVSS

MCLK/INT1/P3.3

9TXD/P3.1

INT0/P3.2

SDA/T0/P3.4

SCL/T1/P3.5

PWM3/P4.3

P3.6/WR/CKO

P4.5/ALE 29

P4.4/CS 28

AIN0/T2/P1.0 43

AVDD 42

VDD 41

P0.0/AD0/CTS1 40

P3.7/RD

XTAL1

16 XTAL2

P2.5/AD13/PWM5 25

P2.7/AD15/PWM7 27

PIN48

10uF

TANT-B

POWER

KPT-2012

KP-2012

10K

0805R

VCC

NET3

D12MI

PIN36

DAVDD

PIN35

PIN34

PIN1

PIN33

PIN2

PIN32

PIN3

PIN31 TICEDAT

PIN4TICERST

PIN30 TICECLK

PIN5

PIN29

PIN6

PIN28

PIN7

ADAVSS

From ICE Bridge's USB Power

PIN8

PIN27

ICE INTERFACE

TICEDAT

TICERST

VCC

JP4

HEADER 5X2

HEADER5x2

1 2

3 4

5 6

7 8

910

TICECLK

PIN9

VCC

10uF/10V

TANT-A

10K

0805R

Reset Circuit

TICERST

SW1

PUSH BOTTOM

PIN26

PIN10

20p

0805C

12MHz

XTAL3-1

0805R

D12MO

20p

0805C

0805R

NET1 PIN11 PIN25

JP2

HEADER 2

HEADER2

TP1

SIP/1P

JP3

HEADER 2

HEADER2

PIN12

PIN18

Title

Size Document Number Rev

Date: Sheet of

M052_TINY_V002.DSN 004

Nuvoton M052_TINY-EVB Board Versin 002

11Tuesday, August 10, 2010

TP2

SIP/1P

TICERST

VCC

ADAVSS

D12MO

D12MI

VCC

L0603

DAVDD

TP3

SIP/1P

JP5

HEADER 6X2

HEADER6X2

1 2

3 4

5 6

7 8

910

11 12

PIN2PIN1 PIN4PIN3

PIN8

PIN6PIN5

PIN11 PIN10PIN9

PIN7

PIN12

PIN14

JP6

HEADER 6X2

HEADER6X2

12 34 56 78 910 1112

PIN26 PIN25

PIN29

PIN28 PIN27

PIN31

PIN30

PIN33

PIN32

PIN35

PIN34

PIN36

JP1

HEADER 6X2

HEADER6X2

12 34 56 78 910 1112

PIN39

PIN38 PIN37

PIN41

PIN40

PIN45

PIN44 PIN43

PIN42

PIN46 PIN47

PIN15

L0603

PIN16

Crystal

PIN46

PIN40

PIN48

PIN44

PIN47

PIN41

PIN39

PIN38

PIN37

PIN45

PIN43

PIN42

PIN13

TICECLK

TICEDAT

TICERST TICERST

TICEDAT

TICECLK

JP7

HEADER 6X2

HEADER6X2

1 2

3 4

5 6

7 8

910

11 12

PIN17

PIN20

PIN19

PIN18

PIN16PIN15 PIN14PIN13

PIN21 PIN20PIN19 PIN18PIN17

PIN24PIN23 PIN22

PIN21

PIN24

PIN23

PIN22

Table of contents

Other Nuvoton Microcontroller manuals

Nuvoton

Nuvoton ISD61S00 ChipCorder Guide

Nuvoton

Nuvoton NuMaker-Volcano User manual

Nuvoton

Nuvoton NuMicro M031 Series User manual

Nuvoton

Nuvoton NuMicro M483 Series User manual

Nuvoton

Nuvoton Nu-LVMDM-MOS User manual

Nuvoton

Nuvoton NuMicro MS51 Series Product manual

Nuvoton

Nuvoton emWin NUC126 User manual

Nuvoton

Nuvoton NuMicro M031 Series User manual

Nuvoton

Nuvoton NuMicro NUC126 Series Product manual

Nuvoton

Nuvoton NuMaker-MS51PC User manual

Nuvoton

Nuvoton NuTiny-SDK-NUC240 User manual

Nuvoton

Nuvoton NuMicro NUC100 Series User manual

Nuvoton

Nuvoton NuMicro series Product manual

Nuvoton

Nuvoton NuMicro NuTiny-SDK-NUC029KGE User manual

Nuvoton

Nuvoton NuMicro series User manual

Nuvoton

Nuvoton NuMicro series User manual

Nuvoton

Nuvoton 1T 8051 User manual

Nuvoton

Nuvoton NuMicro Nu-Link-Gang User manual

Nuvoton

Nuvoton NuMicro NUC442 Series Product manual

Nuvoton

Nuvoton NUTINY-SDK-M058SF User manual

Nuvoton

Nuvoton NuMicro ML51 Series Product manual

Nuvoton

Nuvoton NuMaker-M031TC User manual

Nuvoton

Nuvoton NuMicro MS51 32K Series Product manual

Nuvoton

Nuvoton NuMaker M032BTAI User manual

Popular Microcontroller manuals by other brands

AMS

AMS AS7261 Demo Kit user guide

Novatek

Novatek NT6861 manual

Espressif Systems

Espressif Systems ESP8266 SDK AT Instruction Set

STMicrolectronics

STMicrolectronics ST7 Assembler Linker user manual

Texas Instruments

Texas Instruments Chipcon CC2420DK user manual

Lantronix

Lantronix Intrinsyc Open-Q 865XR SOM user guide

NEC

NEC 78GK0S/K 1+ Series Application note

Mikroe

Mikroe SEMITECH N-PLC Click Application note

Intel

Intel Agilex user guide

Cypress

Cypress CY4607 HX2VL quick start guide

DIGITAL-LOGIC

DIGITAL-LOGIC MICROSPACE manual

Texas Instruments

Texas Instruments TMS320F2837 D Series Workshop Guide and Lab Manual

CYPRES

CYPRES CY14NVSRAMKIT-001 user guide

Texas Instruments

Texas Instruments INA-DUAL-2AMP-EVM user guide

Espressif Systems

Espressif Systems ESP8266EX Programming guide

Abov

Abov AC33M8128L user manual

Laird

Laird BL654PA user guide

Silicon Laboratories

Silicon Laboratories C8051F800 user guide