4
Bluetooth Status LED
This is a small LED next to the On/O switch that illuminates to show the current status of theWave’s Bluetooth connection.
• Flashing Slowly and Intermittently: The Wave is on and is not in pairing mode. This is also the indicator for
“auto-reconnect”, where theWave attempts to connect with the last paired Bluetooth device immediately after it
is powered on.
• Flashing Quickly and Steadily: Pairing mode.
• Solidly Lit: Paired and connected.
On/O Button
On: Press and hold the button for ~3 seconds to turn the NUUWave on. You will hear a two-tone (low-high) sound,
indicating that the speaker is on.
O: Press and hold the button for ~3 seconds to turn the NUUWave o. You will hear a two-tone (high-low) sound,
indicating that the speaker has been switched o.
Auto-o :After 30 minutes of inactivity, the NUU Wave will shut o automatically. To turn the Wave on again, Press and
hold the button for ~3 seconds. The NUUWave will not automatically shut o if you are playing audio through
Bluetooth, 3.5mm connection, or are charging a device with the USB port.
NOTE: The Bluetooth Status LED will light when the Wave is on, and go dark when it is o.
a
b
