DO NOT PUT HOT LIQUIDS OR INGREDIENTS IN ANY
BLENDING VESSEL BEFORE BLENDING START WITH COOL OR
ROOM TEMPERATURE INGREDIENTS HEATED INGREDIENTS
CAN CREATE INTERNAL PRESSURE IN A SEALED BLENDING
VESSEL, WHICH MAY ERUPT ON OPENING AND CAUSE
THERMAL INJURY
• NEVER put hot liquids or ingredients in any blending vessel as it
can be ejected out of the appliance.
• CAUTION! Friction from the rotating blade can cause
ingredients to heat and generate internal pressure in the
sealed vessel. Do not continuously operate for more than one
minute. If the vessel is warm to touch, allow it to cool before
carefully opening it pointed away from your body.
• Extract for no longer than 1 minute. If more extraction is needed,
wait 1 minute, then repeat the extraction process in 1 minute
intervals up to three times as needed to achieve the desired
consistency. If more than three 1-minute extractions are needed,
allow the Power Base to cool for 2-3 minutes after the third
extraction before beginning the next round.
• Never permit any blended mixture to sit inside a sealed vessel
without first releasing internal pressure.
• Do not allow blended mixtures to sit for long periods of time in
a sealed container. The sugars in the fruit and vegetables can
ferment, creating gas and causing pressure to build up and
expand in the vessel which can cause ingredients to burst and
spray out when moved or opened.
• Never use the NutriBullet Balance®to blend ingredients without
adding liquid in as doing so may damage the blade.
• The cyclonic action of your NutriBullet Balance®requires the use
of liquids to make NutriBlasts and other nutritious beverages. The
NutriBullet Balance®is not intended to be used as an ice crusher,
and not without liquids. To make a delicious cold NutriBlast, we
suggest that you use frozen fruit and chilled liquids. Alternatively,
you may add crushed ice, up to 25% of the total cup volume, with
water or other liquid filled up to the “MAX” line. Do not crush ice or
