Nuna pipaicon User manual
ECE R129/00
child height 40cm–85cm
child weight≤13kg
and PIPAFIX™* base instructions
*must be used to meet i-Size standard
EN
Contents
Illustrations 3–10
English (EN)
Safety and Recommendations 11
Product Information 12–13
Parts List 14
WARNING 15–17
Installation Concerns 18
Aeroplane Installation 18
Contents of the Box 19
Handle Adjustment 19
Installation with Base 20–21
Height Adjustment 22
Securing Child 23
Canopy 24
Detach Canopy and Seat Pad 25
Installation without Base 26
Cleaning and Maintenance 27
Warranty, Product Registration & Contact 28
Vehicle Fitting Information 29–53
34
Illustrations
3
1
2 3
1
2 3
1
4
5
position 1 position 2 position 3
A
I
R
B
A
G
2
6
1
2
8
97
56
1
10
12 2
1
11 13
15
16
17
14
1
22
18
19
20
1
2
78
22
23
24
25
26
27
29
28
30
21
31
910
32
33
34
41
Max. 13kg
40cm-85cm
withISOFIX
base
37
38
39
40
35
1
36
1
3
2
EN
EN
11 12
Safety and
Recommendations
Please take note of the following before using the Nuna PIPATM
icon infant child restraint.
If you have any questions or comments regarding the PIPA icon
infant child restraint, we will be glad to hear them through our web
site www.nuna.eu
Please keep the instruction manual at the bottom of the soft goods.
IMPORTANT! RETAIN FOR
FUTURE REFERENCE. READ
CAREFULLY.
Read these instructions carefully before use and keep them for
future reference. Your child’s safety may be affected if you do
not follow these instructions.
Product Information
figure for
installation
child height 40cm-85cm/
child weight≤13kg
(approximately 1.5 years
old or under)
suitable for
child weight≤13kg
child age≤18 months
" i-Size" (Integral Universal ISOFIX infant
child restraint Systems) is a category of
infant child restraint System for use in all
i-Size seating position of a vehicle.
EN
EN
13 14
1 According to the ECE R129/00 Regulation, the infant child
restraint with Base is a Universal ISOFIX Class C, D infant child
restraint and should be tted using the ISOFIX connections.
2 This is an “i-Size” child restraint System. It is approved to
Regulation ECE R129/00, for use in, “i-Size compatible” vehicle
seating positions as indicated by vehicle manufacturers in the
vehicle users’ manual.
3 If in doubt, please consult the infant child restraint manufacturer
or the retailer.
This is an i-Size ISOFIX infant child restraint SYSTEM.It is
approved to ECE R129/00 series of amendments for not all vehicle
manufacture's handbooks list i-Size compatibility yet. This seat and
base is also approved for use in ISOFIX compatible vehicles. Please
refer to the vehicle manufacturer's website or consult your dealer.
It will fit vehicles with positions approved as i-Size ISOFIX positions
(as detailed in the vehicle handbook), depending on the category of
the infant child restraint and of the fixture. If in doubt, consult either
the infant child restraint manufacturer or vehicle manufacturer.
Parts List
Some module may vary depending on model
12
13
14
11
1 Head Support
2 Seat Pad
3 Side Guides
4 Infant Insert
5 Adjustment Webbing
6 Adjustment Button
7 Safety Buckle
8 Shoulder Harness Straps
9 Canopy Mount
10 Canopy
11 Handle
12 Handle Button
13 Rear Guide
14 Stroller Release Handle
15 ISOFIX Connector
16 Shell Indicator
17 ISOFIX Guides
18 Load Leg
19 Load Leg Adjust Button A
20 Load Leg Indicator
21 Load Leg Adjust Button B
22 Infant Child Restraint
Release Button
23 Lock-off
2
3
4
59
678
10
1
23
15
16
18 20
21
22
17
19
EN
EN
15 16
WARNING
NO PIPA icon infant child restraint can guarantee full
protection from injury in an accident. However, proper
use of this PIPA icon infant child restraint will reduce
the risk of serious injury or death to your child.
To use this PIPA icon infant child restraint with the
ISOFIX connections according to the ECE R129/00
Regulation, your child must meet the following
requirements.
Child height 40cm-85cm/Child weight≤13kg
(approximately 1.5 years old or under).
To use this PIPA icon infant child restraint
according to the ECE R129/00 Regulation, your
child must meet the following requirements.
Child weight≤13kg/Child age≤18 months
Any straps of PIPA icon infant child restraint and
vehicle seat should be tightened and not twisted.
DO NOT install this PIPA icon infant child restraint
without following the instructions in this manual or
you may put your child at serious risk of injury or
death.
NEVER leave your child unattended with this PIPA
icon infant child restraint.
DO NOT make any modication to this PIPA icon
infant child restraint or use it along with component
parts from other manufacturers.
DO NOT use this PIPA icon infant child restraint if it
has damaged or missing parts.
DO NOT have your child in large/oversized clothes
because this may prevent your child from being
properly and securely fastened by the shoulder
harness straps and the crotch strap between the
legs.
DO NOT leave this PIPA icon infant child restraint or
other items unbelted or unsecured in your vehicle
because unsecured PIPA icon infant child restraint
can be thrown around and may injure occupants in
a sharp turn, sudden stop, or collision.
DO NOT place rear-facing PIPA icon infant child
restraint on frontal seat with air bag. Death or
serious injury may occur. Please reference vehicle
owner’s manual for more information.
NEVER use a second-hand PIPA icon infant child
restraint or an PIPA icon infant child restraint whose
history you do not know because they may have
structural damage that endangers your child’s
safety.
NEVER use ropes or any other substitutes to secure
PIPA icon infant child restraint in vehicle or to secure
child into PIPA icon infant child restraint.
DO NOT use this PIPA icon infant child restraint
without the soft goods.
The soft goods should not be replaced with
any besides the ones recommended by the
manufacturer. The soft goods constitute an
integral part of the PIPA icon infant child restraint
performance.
DO NOT put anything other than the recommended
inner cushions in this PIPA icon infant child restraint.
Be sure that the PIPA icon infant child restraint is
installed in such a way that no part of it interferes
with movable seats or in the operation of vehicle
doors.
DO NOT continue to use this PIPA icon infant child
restraint after it has suffered any type of crash, even
a minor one. Replace immediately as there may be
invisible, structural damage from the crash.
Remove this PIPA icon infant child restraint and
base from the vehicle seat when it is not in regular
use.
Consult the distributor for issues concerning
maintenance, repair and part replacement.
To avoid the risk of falling out, always secure the
child using the safety harness when the child is
placed in PIPA icon infant child restraint, even when
the PIPA icon infant child restraint is not in the
vehicle.
EN
EN
17 18
Before carrying the PIPA icon infant child restraint
by hand, ensure that the child is fastened with the
safety harness, and that the handle is correctly
locked in a vertical position.
To avoid serious injury or death, NEVER place PIPA
icon infant child restraint on elevated surface seat
with child in it.
The parts of this PIPA icon infant child restraint
should not be lubricated in any way.
Always secure child in PIPA icon infant child
restraint, even on short trips, as this is when most
accidents occur.
DO NOT use this PIPA icon infant child restraint
for more than 5 years after the purchase date as
parts may degrade over time, or from exposure
to sunlight, and may not perform adequately in a
crash.
Please keep this PIPA icon infant child restraint
away from sunlight, otherwise it may be too hot for
child’s skin. Always touch test seat before placing
child in it.
Frequently check the ISOFIX guides for dirt and
clean them if necessary. Reliability can be effected
by ingress of dirt, dust, food particles etc.
DO NOT place any objects in the load leg area in
front of your base.
Correct Installation is only permitted by use of the
ISOFIX connectors.
After your child is placed in this PIPA icon infant
child restraint, the safety belt must be used
correctly, and ensure that any lap strap is worn low
down, so that the pelvis is rmly engaged.
DO NOT use any load bearing contact points
other than those described in the instructions and
marked on the PIPA icon infant child restraint.
Installation Concerns
This PIPA icon infant child restraint with the Base is
suitable for vehicle seats with i-Size ISOFIX anchor
points. (1)
DO NOT place rear-facing PIPA icon infant child
restraint on front seat with air bag. Death or serious
injury may occur. (2) Please reference vehicle
owner’s manual for more information.
DO NOT install this PIPA icon infant child restraint
on vehicle seats that face sideways or rearward with
respect to the moving direction of the vehicle. (3)
It is recommended to install this PIPA icon infant
child restraint on the rear vehicle seat. (4)
DO NOT install this PIPA icon infant child restraint
on vehicle seats unstable during installation.
Aeroplane Installation
The Nuna PIPA icon can only be installed using a
2-point safety belt if being used in an aircraft.
DO NOT install in a vehicle using a 2-point safetybelt.
When being used in an aircraft, the child restraint must
only be installed rear facing on the seat.
Nuna child restraint width is 450mm, but some aircraft
seat widths are 430mm. For narrow seat, please place
padding under the seat to raise the height and allow it
to t between the arm rests.
This child restraint’s base is NOT certied for use in
aircraft.
Table of contents
Languages:
Other Nuna Stroller manuals
