numskull PS4 User manual
PS4
Games Tower and Charger
FEATURES
• Dual USB ports, compatible with all PS4s
• Charge 2 controllers simultaneously
SAFETY INFORMATION
This games tower and charger is for use with the PS4 console
and controllers. It is designed to charge your DUALSHOCK®4
wireless controllers and simultaneously store your games.
• Before using this product, read through this documentation
• Keep the product in a dry place and do not expose to dust
• Do not twist and pull on the connectors and cables
• Do not spill liquid on the product and its connectors
• Do not short-circuit this product
• Never disassemble burn or expose this product to high
temperatures
• Never use any other adapter than the power adapter
included with the PS4™ Games Tower and Charger
EN
TECHNICAL DATA
• Input: DC 5V
• x2 Micro USB adapters included
1. Charging Base
3. Multi Region Power Adapter
5. Charging positions for DUALSHOCK®4
Wireless Controllers
7. DC 5V connector
2. Micro USB adapters for DUALSHOCK®4
Wireless Controllers (not suitable for any
other brand of controller)
4. Operation and charging indicator LEDs
6. DC input
8. Clips (To hold the charging wire)
INSTALLING THE ADAPTER
Connect the Micro USB adapter (2) to the Micro-USB port on
the DUALSHOCK®4 Wireless Controller.
TECHNICAL FEATURES
INSTRUCTIONS (STORAGE UNIT)
• Slide the 2 x Bottom sections (9) into the Left Side section
(10) and Top section (8) as shown
• Carefully position Right side section (11) in line with
assembly and attach firmly
• Do not apply excessive force when attaching sections. They
should slide together with relative ease.
• Position the game storage assembly in a standing position
then place the Charging Base (1) on top and slide it to the
left until it locks into place. This is a tight fit and once locked
in place cannot be removed again unless unlocked by sliding
to the right.
1x Top Section (8)
1x Left Side Section (9)
Clips (to hold charging wire) (12)
2x Bottom Section (9)
1x Right Side Section (10)
INSTRUCTIONS (CHARGING MAT)
• Connect the DC 5V connector (7) to the DC input (6)
located on the side of the charging base
• Place the charging base on top of the games tower assembly
• Plug the power adapter (3) into an electrical outlet
• Place your DUALSHOCK®4 Wireless Controller equipped
with the Micro USB adapter (2) directly onto the Charging
Base (1), on top of, and in the same position as the controller
drawings
NOTES
PS4 console USB port only supports charging of one DUALSHOCK®4
Wireless Controller. If two DUALSHOCK®4 Wireless Controllers are
attached, the USB port will auto shut down without doing any harm to the
console itself.
LED STATUS INDICATORS
The charging LEDs (4) will display a constant GREEN to indicate
charging and will turn to BLUE once fully charged. A FLASHING
GREEN LED indicates an error with the product. Once they are fully
charged please remove the DUALSHOCK®4 Wireless Controllers from
the Charging Base (1). If NO LED appears this means no charging is
occuring or the Charging Base (1) is idle.
TROUBLESHOOTING
EN – Multi-Region Power adapter instructions
FR - Instructions d'adaptateur d'alimentation multi-région
DE - Multi-Region-Netzteilanweisungen
IT - Istruzioni per l'adattatore di alimentazione in più aree
ES - Instrucciones del adaptador de corriente multiregión
PT- Instruções do adaptador de energia de várias regiões
WARRANTY INFORMATION
Worldwide, Rubber Road Ltd warrants to the consumer that this Numskull product will be free
from material defects and manufacturing flaws for a period of two (2) years from the original date
of purchase. Should the product appear to be defective during the warranty period, immediately
contact Technical Support, who will indicate the procedure to follow. If the defect is confirmed, the
product must be returned to its place of purchase (or any other location indicated by Technical
Support). Within the context of this warranty, the consumer’s defective product will, at Technical
Support’s option, be either repaired or replaced. Where authorized by applicable law, the full
liability of Rubber Road Ltd and its subsidiaries (including for indirect damages) is limited to the
repair or replacement of the Numskull product. The consumers legal rights with respect to
legislation applicable to the sale of consumer goods are not affected by this warranty. This warranty
shall not apply: (1) if the product has been modified, opened, altered or has suffered damages as a
result of inappropriate or abusive use, negligence, an accident, normal wear, or any other cause not
related to a material defect or manufacturing law; (2) in the event of failure to comply with the
instructions provided by Technical Support; (3) to software not published by Rubber Road Ltd, said
software being subject to a specific warrant provided by its publisher. Retain this information,
colours and decorations may vary.
These goods come with guarantees that cannot be excluded under the Australian Consumer Law
and New Zealand Consumer Guarantees Act. You are entitled to a replacement or refund for a
major failure and compensation for any other reasonably foreseeable loss or damage. You are also
entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the
failure does not amount to a major failure.
If purchased in Australia or New Zealand, this product comes with one year (12 months) warranty
from date of purchase. Defects in the product must have appeared within one year from date of
purchase, in order to claim warranty. All warranty claims must be facilitated back through the
retailer of purchase in accordance with the retailers returns policy and procedures. Any expense
incurred as a result of returning the product to the retailer of purchase are the full responsibility of
the customer.
" ", "PlayStation", “ ” and “ ” are registered trademarks of Sony Interactive Entertainment
Inc. All rights reserved. Licensed for sale in Europe, Africa, Middle East, Russia, India and Oceania and for use
exclusively with PlayStation®4. Manufactured by Rubber Road Ltd, United Kingdom, AL7 1HH
(Rubberroad.co.uk).
AUSTRALIA
Bluemouth Interactive
Level 2, 2 Darling Street
South Yarra
VIC 3141, Australia
Phone: (03) 9867 2666
Email - [email protected]
Visit - www.bluemouth.com.au
NEW ZEALAND
Fiveight Distribution Ltd
Unit B, 39 Westpoint Drive
Hobsonville
Auckland 0618, New Zealand
Phone: (64) 9 479 1530
Email - [email protected]
Visit - http://www.fiveight.co.nz
PS4
Socle de rangement et de charge
FONCTIONNALITÉS
• Insérer l’adapteur Micro USB (2) dans le port prévu à cet
eet sur la manette sans fil DUALSHOCK®4
INFORMATION DE SÉCURITÉ
Cette tour de jeux et chargeur est à utiliser avec la console PS4
et les contrôleurs. Il est conçu pour recharger vos contrôleurs
sans fil DUALSHOCK®4 et stocker simultanément vos jeux.
• Lire attentivement ce document avant d’utiliser le produit
• Conserver le produit au sec et à l’abri de la poussiére et de la
lumiére du soleil
• Ne pas tordre ou tirer trop vigoureusement sur les fiches et
les cables
• Ne pas renverser de liquide sur le produit et ses fiches
• Ne pas court-circuiter le produit
• Ne jemais désassembler, bruler ou exposer le produit a des
temperatures elevees
• Ne jemaids utiliser d’autres adapteurs que l’adapteur
électrique fourni avec le socle de rangement et de charge
pour jeux PS4
FR
DONNÉES TECHNIQUES
• Entrée: DC 5V
• x2 adaptateurs micro USB inclus
1. socle de recharge
3. Adaptateur secteur multi-régions
5. Positions de recharge pour
DUALSHOCK®4 Contrôleurs sans fi
7. Connecteur DC 5V
2. Adaptateurs micro USB pour
DUALSHOCK®4 Contrôleurs sans fil
(ne convient à aucune autre marque de
contrôleur)
4. Voyants de fonctionnement et de charge
6. Entrée DC
8. Clips (pour maintenir le fil de charge)
INSTALLATION DE L’ADAPTATEUR
Insérer l’adapteur Micro USB (2) dans le port prevu à cet eet
sur la manette sans fil DUALSHOCK®4.
TECHNISCHE CARACTÉRISTIQUES
ASSEMBLAGE DU RANGEMENT DE JEUX
• Glissez les 2 x sections inférieures (9) dans la section côté
gauche (10) et la section supérieure (8) comme illustré
• Positionner avec précaution la partie latérale droite (11) en
ligne avec le montage et fixer fermement
• N’appliquez pas de force excessive lors de la fixation des
sections. Ils devraient glisser ensemble avec une relative
facilité.
• Positionnez l’ensemble de rangement du jeu en position
debout, puis placez la base de chargement (1) sur le dessus et
faites-la glisser vers la gauche jusqu’à ce qu’elle se verrouille
en place. Il s’agit d’un ajustement serré et une fois verrouillé
en place ne peut pas être retiré à moins que déverrouillé en
glissant vers la droite.
1x partie superieure (8)
2x barres inferieures (9)
1x partie gauche (10)
1x partie droite (11)
Attaches (maintiennent les cables
de charge en place)
Other manuals for PS4
3
Table of contents
Languages:
Other numskull Batteries Charger manuals
