User Manual XLP 504
09/2016 | 01 9Please note
FOR YOUR SAFETY
Intended use
The XLP 504 label printer is designed for printing label material, using the thermal or thermal trans-
fer printing process. In addition, the dispenser version of the printer can dispense self-adhesive la-
bels and can rewind the remaining backing paper (ar alternatively the complete label material). It is
possible to use a wide range of label materials and thermal transfer ribbons. Label stock must be
in roll shape or fan-folded. The label web can optionally be pulled-in from outside the printer through
the slots in the rear side or bottom plate.
Observe the technical specifications of the printer, see Technical data on page 23. Any other type
of or more extensive application will be considered abnormal use.
NOVEXX Solutions shall assume no liability for damage resulting from non-intended use of the ma-
chine.
Safety notes
Follow the instructions
Safe and efficient operation of the printer can only be guaranteed if you observe all necessary in-
formation.
• Before operating the printer, read the operating instructions and all other notes carefully.
• Observe the additional safety and warning notes on the printer.
Qualifications required
• Trained staff is required for inserting and changing foils and material.
• Users need to be instructed in the use of the printer so they can work safely and independently.
• Users should be able to resolve minor operational issues and faults by themselves.
• At least two users should be instructed.
Requirements for safe operation
• Only use the printer in enclosed areas with environmental conditions matching the values given
in the technical specifications!
• Only operate the printer on a plane, solid support.
• Make sure that the power supply socket for the printer is readily accessible!
• Only trained and authorized personnel should operate the printer!
• During operation, the printhead can become hot! Care should be taken when touching the print-
head!
• Do not make any modifications or any additional casing for the printer!
• Do not allow any liquids to enter into the printer!
• Repairs to the printer may only be performed by authorized specialists who are aware of the
risks involved!
• Lay the power supply cable, data cables and compressed air hoses (if applicable) in a way that
nobody can stumble over it.
• In case of emergency, switch off the printer and disconnect the power supply cable!
• Only use original accessories!
