NOVAKON NPP Series User manual
Revision V1.0
Release Date: August, 2023
©2023 Copyrights Reserved
User Manual
Novakon Panel PC – NPP Series
NPP-215P01
Fanless Industrial Modular Panel PC
Intel
®
Celeron
®
J6412
NPP-215P01 User Manual
1
Warning!
Caution
Risk of explosion if the battery is replaced with an incorrect type.
Batteries should be recycled where possible. Disposal of used batteries must be in
accordance with local environmental regulations.
Electric Shock Hazard – Do not operate the machine with its back cover removed.
There are dangerous high voltages inside.
This equipment generates, uses and can radiate radio frequency energy and
if not installed and used in accordance with the instruction manual, it may cause
interference to radio communications. It has been tested and found to comply
with the limits for a Class A computing device pursuant to FCC Rules, which are
designed to provide reasonable protect
ion against such interference when
operated in a commercial environment. Operation of this equipment in a
residential area is likely to cause interference in which case the user at his own
expense will be required to take whatever measures may be required to correct
the interference.
NPP-215P01 User Manual
2
Safety Precautions
Follow the messages below to prevent your systems from damage:
◆Avoid your system from static electricity on all occasions.
◆Prevent electric shock. Do not touch any components of this card when
the card is power-on. Always disconnect power when the system is not
in use.
◆Disconnect power when you change any hardware devices. For instance,
when you connect a jumper or install any cards, a surge of power may
damage the electronic components or the whole system.
NPP-215P01 User Manual
3
Table of Contents
Warning!................................................................................…………………………….…1
Caution/Disclaimer……..……………………..…………………………………………………………………1
Safety Precautions…………………………………………………………………….…..……………………..2
Chapter 1 Getting Started
1.1 Features………………………..………………………...…………………………..4
1.2 Specifications…………………...………………………………………………….4
1.3 Dimensions…………………………....…….……………………………………..6
1.4 Brief Description..………………………………………..………………….……7
1.5 Installation of SSD and Memory……………………………………..…..7
1.6 VESA Mounting…………………………………..………………………………9
1.7 Panel Mounting……………………………………..………………….……….9
Chapter 2 Hardware
2.1 Motherboard Introduction……………………...……………..………....10
2.2 Specifications…………………………..…………………………………………10
2.3 Jumpers and Connectors Location……………………………………...13
2.4 Jumpers Setting and Connectors…………………………………..……15
Chapter 3 BIOS Setup
3.1 Introduction……………………………...…….……...…………………………24
3.2 The Main Menu………………………………………………………………….25
3.3 Advanced…………………,………………………..………………………………26
3.4 Chipset……………,………………………………………………………………...39
3.5 Security…………,,……………………………………….………………………...41
3.6 Boot……………………………………………………………….…………………..44
3.7 Save & Exit……..………………………………………….……………………..45
NPP-215P01 User Manual
4
Chapter 1 Getting Started
1.1 Features
21.5” Industrial Compact Size Panel PC
Flat front panel touch screen
Fanless design
Intel® Celeron® J6412 (2.0 GHz) CPU
DC 9~36V wide-ranging power input
IP66 compliant front panel
Projected capacitive touchscreen support 7H anti-scratch surface
1.2 Specifications
NPP-215P01
LCD
LCD Size
21.5 inches TFT-LCD
Touch Type Projected Capacitive Touch
Luminance (cd/m²)
500 (Typical)
System
CPU
Onboard Intel Celeron J6412 (2.0 GHz )
Chipset SoC
Memory
8GB DDR4 3200 MHz (16GB/32GB Optional)
I/O Port
USB
4 x USB 3.2 Gen 1, 1 x USB 2.0 (Optional)
Serial 1 x DB9 (RS-232/422/485 & RI/5V/12V) (COM1 for optional)
1 x DB9 (RS-232/422/485) (COM2 for optional)
2 x DB9 (RS-232) (COM3/COM4 for optional)
Audio
1 x Audio Line Out
LAN 2 x GbE LAN RJ-45
HDMI
2 x HDMI 2.0
Power 1 x 2 pins terminal block for external power switch (Optional)
1 x 3 pins terminal block power connector
1 x power switch on/off
Storage Space
Storage (SSD) 1 x 2280 M.2 M-Key (PCIe x2, SATA 6Gb/s)
NPP-215P01 User Manual
5
Expansion
Expansion Slot
1 x Full-size mini PCIe
Touch Screen – Projected Capacitive Type
TS Control IC
Chip on flex
Interface USB
Light Transmission Over 85%
Power
Power Input DC 9~36V
Mechanical
Color Silver (Pantone 877C)
Front Bezel Metal Aluminum front bezel/ Steel for back cover
IP Rating IP66 compliant front panel
Environmental
Operating
temperature
0~50°C
Storage temperature -20~60°C
Humidity 10 to 90% @ 40°C, non- condensing
Certification CE / FCC Class A
Operating System Support
OS Support
Windows 10 IoT, Debian 11
NPP-215P01 User Manual
7
1.4 Brief Description of NPP-215P01
This is a 21.5” Industrial Compact Size Panel PC, which comes with flat front
panel touch screen and fanless design. It is powered by Intel J6412(2.0 GHz)
processor; and 8GB DDR4 3200MHz memory (16GB/32GB memory is for option).
NPP-215P01 is DC 9~36V wide-ranging power input and IP66 compliant front panel.
The model features projected capacitive touch supports 7H anti-scratch surface is
ideal for use as PC-based controller for industrial automation & factory automation.
1.5 Installation of SSD and Memory
Step 1
There are two screws to deal with when
enclosing or removing the chassis.
Step 2
Slide the BOX PC downward.
NPP-215P01 User Manual
8
Step 3
Carefully flip the BOX PC and lay it flat.
Step 4
You can replace Memory or SSD directly
by unscrewing one screws as shown in
the picture.
NPP-215P01 User Manual
9
1.6 VESA Mounting
The NPP-215P01 is designed to be VESA mounted as shown in Picture. Just carefully
place the unit through the hole and tighten the given screws from the rear to secure
the mounting.
Figure 1.21: VESA Mounting
1.7 Panel Mounting
There are eight holes located along the four sides of NPP-215P01. Insert the clamp
from the four sides and tighten them with the nuts provided.
Figure 1.22: Panel Mounting
Other manuals for NPP Series
1
This manual suits for next models
1
Table of contents
Other NOVAKON Touch Panel manuals
Popular Touch Panel manuals by other brands
IBASE Technology
IBASE Technology ASTUT-152-RE1S user manual
YASKAWA
YASKAWA TP 610C manual
B&R
B&R Power Panel C Series user manual
Beijer Electronics
Beijer Electronics X2 control Hardware and installation manual
AXIOMTEK
AXIOMTEK GOT321W-521 user manual
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Operation manual
