Noritz CR60 User manual
Installation Manual (Noritz CR60 Rack –Wheel Dolly Kit) –V2 9.20 Page 1of 6
(CONFIDENTIAL-The information contained in these documents is confidential, privileged and only for the information of the intended recipient
and may not be used, published or redistributed without the prior written consent of Noritz America Corp.)
Installation Manual
Noritz CR60 Rack –Wheel Dolly Kit
Installation Manual (Noritz CR60 Rack –Wheel Dolly Kit) –V2 9.20 Page 2of 6
(CONFIDENTIAL-The information contained in these documents is confidential, privileged and only for the information of the intended recipient
and may not be used, published or redistributed without the prior written consent of Noritz America Corp.)
Purpose
The Noritz CR60 Rack –Wheel Dolly Kit provides the installer a much easier method of moving
the complete rack to the appropriate location. Step by step instructions on installation of CR60
rack wheel dolly kit.
Sections
1. Parts and Accessories
2. Installation Steps
a. Wheel Dolly Rack Axle installation
b. Lifting rack wheel dolly
c. Moving Rack
d. Removal of Rack Wheel Dolly
Installation Manual (Noritz CR60 Rack –Wheel Dolly Kit) –V2 9.20 Page 3of 6
(CONFIDENTIAL-The information contained in these documents is confidential, privileged and only for the information of the intended recipient
and may not be used, published or redistributed without the prior written consent of Noritz America Corp.)
1. Parts and Accessories
Installation Manual (Noritz CR60 Rack –Wheel Dolly Kit) –V2 9.20 Page 4of 6
(CONFIDENTIAL-The information contained in these documents is confidential, privileged and only for the information of the intended recipient
and may not be used, published or redistributed without the prior written consent of Noritz America Corp.)
2. Installation Steps
a. Wheel Dolly Rack Axle
i. Locate holes on bottom of CR60-WH Models (Top Frame), open tube on each base stand
of the CR60-FS Models:
ii. Place rack wheel dolly over opening
iii. Center rack wheel dolly hole over opening
iv. Insert and run wheel dolly rack axle through rack tube, insert lynch pins on EACH side of
axle. Close lynch pins on each side.
Installation Manual (Noritz CR60 Rack –Wheel Dolly Kit) –V2 9.20 Page 5of 6
(CONFIDENTIAL-The information contained in these documents is confidential, privileged and only for the information of the intended recipient
and may not be used, published or redistributed without the prior written consent of Noritz America Corp.)
b. Lifting rack wheel dolly (Example: CR60-FS-6)
i. Insert wheel dolly lift bar in base
ii. (1) Pull DOWN the lift bar, (2) PLACE support bar between side of rack base and wheel
dolly. Make sure to center on both sides.
iii. Make sure BOTH casters are outward and straight for easy mobility
iv. Repeat on other side of rack
Installation Manual (Noritz CR60 Rack –Wheel Dolly Kit) –V2 9.20 Page 6of 6
(CONFIDENTIAL-The information contained in these documents is confidential, privileged and only for the information of the intended recipient
and may not be used, published or redistributed without the prior written consent of Noritz America Corp.)
c. Moving Rack
i. Rack is now ready to be easily moved
ii. 2 people recommended for better mobility
d. Removal of Rack Wheel Dolly and placing CR60 base on the ground
i. (1) Pull DOWN the lift bar, (2) REMOVE support bar between side of rack base and
wheel dolly. Remove lynch pins and wheel dolly axles.
Table of contents
Other Noritz Rack & Stand manuals
Popular Rack & Stand manuals by other brands
Salamander
Salamander Acadia AC/W/L400/WH Assembly instructions
Fohhn
Fohhn VAT-09 Mounting instruction
ricoo
ricoo FS0522 quick start guide
AMSOIL
AMSOIL BMK-22 Installation and service instructions
Kargo Master
Kargo Master 48220 installation guide
Milestone AV Technologies
Milestone AV Technologies SIMPLICITY SLF2 installation instructions
