NoiseKen SG-7040A User manual

INSTRUCTIONMANUAL

MULTICHANNELSIGNALGENERATOR

MODEL SG-7040A

NOISE LABORATORY CO., LTD.

Edition 1.00

AEJ00616-00E-0A

NOTICE

•

The contents of this instruction manual（the “Manual”）are subject to change without

prior notice.

•

No part of the Manual may be reproduced or transferred, in any form and for any

purpose, without the permission of Noise Laboratory Co., Ltd.(the “Company”)

•

The contents of the Manual have been thoroughly examined. However, if you find any

problems, misprints, or missing information, please contact the dealer where you

purchased your product (the “Dealer”).

•

The Company or the Dealer will not accept any responsibility for any loss or damage

resulting from improper usage, failure to follow the Manual, or any repair or modifications

of this product (the “Unit”) undertaken by a third party other than the Company or parties

authorized by the Company.

•

The Company will not accept responsibility for any loss or damage resulting from

remodeling or conversion solely undertaken by the user.

•

In addition, please note that the Company cannot be held responsible for any

consequences arising from the use of this product.

1.IMPORTANT SAFETY PRECAUTIONS

As each of the following items is very important matter to be attended, thoroughly read it

before operation of the SG-7040 (hereinafter “the Unit”).

1. The Unit cannot be used in a fire prohibited area or other

explosive areas. If

used in such an area, the Unit is liable to cause combustion or ignition due to

electric discharge etc.

2. A person who has a pacemaker on should not operate the Unit and also should

not enter the area where it is operating.

3. Before connecting the Unit to DUT (Device Under Test), accessories for test

conditions, optional equipment and other equipment, turn off power supply of all

connected instruments and confirm there is no remaining electricity. Otherwise

you may receive an electric shock.

4. Safety recommendations are listed in Par. "5. Basic Safety

Precautions" (Page

7). Thoroughly read these recommendations before setting connection and

starting a test.

Memorandum

2.APPLICATION FORM FOR INSTRUCTION MANUAL

We place an order for an instruction manual.

Model: SG-7040A

Serial No.:

Applicant:

Company name:

Address:

Department:

Person in charge:

Tel No.:

Fax No.

Cut off this page “APPLICATION FORM FOR INSTRUCTION MANUAL”

from this volume and keep it for future use with care.

When an INSTRUCTION MANUAL is required, fill in the above Application Form and

mail or fax it to the following sales department of our company.

To: Noise Laboratory Co., Ltd.

1-4-4 Chiyoda Chuo-ku Sagamihara City,

Kanagawa Pref., 252-0237 Japan

Tel: +81-(0)42-712-2051 Fax: +81-(0)42-712-2050

Cut

line

Memorandum

3.CONTENTS

IMPORTANT SAFETY PRECAUTIONS ..................................................................................... 1

APPLICATION FORM FOR INSTRUCTION MANUAL ............................................................ 3

CONTENTS .................................................................................................................................. 5

PREFACE ..................................................................................................................................... 6

BASIC SAFETY PRECAUTIONS ................................................................................................ 7

5-1. S

YMBOLS OF

AZARD

.................................................................................................................. 7

5-2. B

ASIC

AFETY

RECAUTIONS

...................................................................................................... 7

ACCESSORY ................................................................................................................................ 9

NAME AND FANCTION OF EACH PART ............................................................................... 10

7-1. F

RONT

ANEL

............................................................................................................................ 10

7-2. R

EAR

ANEL

.............................................................................................................................. 11

SETTING AND CONNECTION ................................................................................................. 12

8-1. S

ETTING AND

REPARATION

...................................................................................................... 12

8-2. C

ONNECTION

............................................................................................................................. 12

OPERATION ............................................................................................................................... 13

9-1. I

NITIAL

ETTING

........................................................................................................................ 13

9-2. O

PERATION

................................................................................................................................ 13

10.

SYSTEM CONFIGURATION ................................................................................................. 14

11.

SPECIFICATIONS .................................................................................................................. 15

12.

ARANTY .............................................................................................................................. 18

13.

MAINTENANCE ..................................................................................................................... 20

14.

NOISE LABORATORY SUPPORT NET ORK ..................................................................... 21

4.PREFACE

We thank you for your purchase of the MULTI CHANNEL SIGNAL GENERATOR SG-7040A

(hereinafter “the Unit”). This instruction manual (“the Manual”) contains how to use the Unit and

other important information. In order to obtain the highest performance from the Unit, thoroughly

understand the contents of the Manual and use as ready reference for operation.

•This appliance generates arbitrary waveform from 1 channel to at most 4 channels.

•Connect to PC and USB cable and can control test wave pattern production and practice by Windows

Ⓡ

software.

•Capable of generating required waveforms of DC variation to perform tests for in-vehicle devices.

•Capable of connecting to bipolar power supplies.

•This instruction manual is common for all of SG-7040A series models.

SG-7040A-1 MULTI CHANNEL SIGNAL GENERATOR 1ch

（

Waveform generating unit is 1 pcs

）

SG-7040A-2 MULTI CHANNEL SIGNAL GENERATOR 2ch

（

Waveform generating unit is 2 pcs

）

SG-7040A-3 MULTI CHANNEL SIGNAL GENERATOR 3ch

（

Waveform generating unit is 3 pcs

）

SG-7040A-4 MULTI CHANNEL SIGNAL GENERATOR 4ch

（

Waveform generating unit is 4 pcs

）

The Manual will help operators handle and utilize the MULTI

CHANNEL SIGNAL GENERATOR SG-7040 in safety.

Keep the Manual in a place where readily available.

5.BASIC SAFETY PRECAUTIONS

5-1. Symbols of Hazard

5-2. Basic Safety Precautions

1. The Unit cannot be used in an explosive area, fire prohibited area, etc. Use of the Unit in

such an area is liable to cause combustion or ignition.

【

【【

【

Precautions for human body and environments

】

】】

】

2. Do not open the cover of the unit. Only service engineers qualified by the Company can

open the cover for maintenance and repair.

【

【【

【

Precautions for human body

】

】】

】

3. The Company or the Dealer will not accept any responsibility for any loss or damage

resulting from improper usage, failure to follow the Manual, or any repair or

modifications of the Unit undertaken by a third party other than the Company or parties

authorized by the Company.

【

【【

【

Precautions for human body, operation, environments and connection

】

】】

】

4. Before connecting the Unit to DUT, accessories for test conditions, optional equipment

and other equipment, turn off power supply of all connected instruments, confirm there

is no remaining electricity, and connect each cable securely. Otherwise you may receive

an electric shock or the instruments may be damaged.

【

【【

【

Precautions for human body and connection

】

】】

】

5. Use accessories and optional products supplied by the Company to operate the Unit securely

andsafely.

【

【【

【

Precautions for operation and connection

】

】】

】

DANGER 危険

It expresses a DANGER.

DANGER indicates an impending dangerous

condition resulting in a serious injury or

death

, if such a

condition is not avoided

t expresses a WARNING.

WARNING indicates a potentially hazardous

situation which, if not avoided, could result in

death or serious injury.

It expresses a CAUTION.

CAUTION indicates a potentially hazardous

situation which, if not avoided, may result in

minor or moderate injury

DANGER 危険

BASIC SAFETY PRECAUTIONS

Supply power for test within the rated range (Do not let output terminals be short-circuited). Do

notmisplacethepolarity.Otherwisethe Unitmaybedamaged.

【

【【

【

Precautions for operation and connection

】

】】

】

7. Avoid using or storing the Unit in high or low temperature environment (Operating

temperature range: 15~35°C / Operating humidity range: 25~75%).

【

【【

【

Precautions for environments

】

】】

】

8. If dewing or condensation occurs, thoroughly dry it before operating the Unit.

【

【【

【

Precautions for environments

】

】】

】

9. Avoid using the Unit in an extremely humid or dusty place.

【

【【

【

Precautions for environments

】

】】

】

10. Repair, maintenance and internal adjustment of the Unit should be performed by a

qualified service engineer.

【

【【

【

Precautions for maintenance

】

】】

】

11. Do not wipe the Unit with thinner, alcohol or similar solvent. When the body is dirty, soak

a cloth in detergent, squeeze the cloth and wipe the body with it.

【

【【

【

Precautions for maintenance

】

】】

】

12. Be sure to keep a vent of the Unit open for ventilation.

【

【【

【

Precautions for operation and connection

】

】】

】

13. Useinputand outputcableswithwithstandvoltageand current capacity.

【

【【

【

Precautions for connection

】

】】

】

Table of contents

Other NoiseKen Portable Generator manuals

NoiseKen

NoiseKen ISS-7630 User manual

Popular Portable Generator manuals by other brands

Kohler

Kohler 20EORZ Operation

Powerhorse

Powerhorse 83171 owner's manual

HURST

HURST ML-630-SI instruction manual

ETQ

ETQ TG4000 owner's manual

Briggs & Stratton

Briggs & Stratton 40265 Illustrated parts list

ConMed

ConMed 7550 Service manual

Owon

Owon Waveform Generator manual

evertz

evertz 7700 Series manual

Power Stroke

Power Stroke PS906025 Operator's manual

Firefly

Firefly Cygnus CYG2400/460/24 user manual

Draper

Draper PG950S Instructions for

PowerBoss

PowerBoss PowerBoss Operator's manual

SDMO

SDMO SH 4000 Generating set user and maintenance manual

EINHELL

EINHELL STE 5500 operating instructions

Wanco

Wanco WI3000P Operator's manual

Full Boar

Full Boar FBT-3300 instruction manual

Dwyer Instruments

Dwyer Instruments ASG manual

Westinghouse

Westinghouse WH1000i Series owner's manual