Noise LSS-6000 Series User manual
R
INSTRUCTION MANUAL
POWER LINES CDN UNIT
FOR
LSS-6000 series
MODEL
LSS-INJ6350
NOISE LABORATORY CO., LTD.
1.09 EDITION
AEE00029-00E-0J
NOTICE
The contents of this booklet are subject to chan e without prior notice.
No part of this booklet may be reproduced or transferred, in any form, for any
purpose, without the permission of Noise Laboratory Co., Ltd.
The contents of this booklet have been thorou hly checked. However, if a
doubtful point, an error in writin or a missin is found, please contact us.
Noise Laboratory Co., Ltd. shall have no liability for any trouble resultin from
the misuse or improper handlin of this product re ardless of the contents of this
booklet or arisin from the repair or remodelin of this product by a third party
other than Noise Laboratory Co., Ltd. or its authorized person.
Noise Laboratory Co., Ltd. shall have no liability for any trouble resultin from
the remodelin or modification of this product.
In no event shall Noise Laboratory Co., Ltd. be liable for any results arisin from
the use of this product.
1
1. IMPORTANT SAFETY PRECAUTIONS
Thoroughly understand the following precautions before use, as they are important
matters for handling this unit in safety.
1. As the surge output part of this unit and Lightning Surge Simulator
(Models LSS-6000 series) generate high voltage and great electric
current (6.6k 3300A maximum), carefully handle it. Mishandling
or careless operation may result in a fatal wound.
2. This unit and Lightning Surge Simulator (Models LSS-6000 series)
cannot be used in an explosive area, fire prohibited area, etc. Use
of this unit in such an area is liable to cause combustion or ignition.
3. A person who has a pacemaker on should not operate this unit and
Lightning Surge Simulator (Models LSS-6000 series), and also
should not enter the area where they are operating.
4. Test rig to be used with this unit should be capable of withstand
voltage at least 6.6k . EUT test using this unit should be performed
in a protective enclosure or cover against scattering broken pieces,
fire electric shock, etc.
5. When make connections between this unit, associated surge
generator, accessories, optional equipment and other equipment,
press STOP SWITCH of the Lightning Surge Simulator and check to
see that STOP SWITCH switch of the Lightning Surge Simulator is
lighting up beforehand. And then turn off a breaker for LINE
INPUT of this unit beforehand. Otherwise, you may receive an
electric shock.
6. When using the main unit, be sure to have the line switch of the
Lighting Surge Simulator (Models LSS-6000 series) “OFF”.
7. Read the description of important safety precautions of the
instruction manual for Lightning Surge Simulator (Models LSS-6000
series) before testing.
2
Memorandum
3
2. APPLICATION FORM FOR INSTRUCTION MANUAL
We place an order for an instruction manual.
Model: LSS-INJ6350
Serial No.:
Applicant:
Company name:
Address:
Department:
Person in charge:
Tel No.:
Fax No.
Cut off this page "APPLICATION FORM FOR
INSTRUCTION MANUAL" from this volume an keep it for
future use with care.
When an IN TRUCTION MANUAL is required, fill in the above
Application Form and mail or fax it to the following sales department of
our company.
To: Noise La oratory Co., Ltd.
1-4-4, Chiyoda, Sagamihara City
Kanagawa 229-0037, Japan
TEL: +81 (0)42 712 2051 FAX: +81 (0)42 712 2050
Cut
line
4
Memorandum
5
3. TABLE OF CONTENTS
1. IMPORTANT SAFETY PRECAUTIONS ................................................................. 1
2. APPLICATION FORM FOR INSTRUCTION MANUAL ........................................ 3
3. TABLE OF CONTENTS ........................................................................................... 5
4. PREFACE .................................................................................................................. 7
4-1.
P
REFACE
.................................................................................................................... 7
4-2.
F
UNCTIONS AND CAPABILITIES
.................................................................................. 7
5. APPEARANCE OF THE UNIT AND POSITION OF SERIAL NUMBER ...................... 8
5-1
A
PPEARANCE OF THE UNIT
........................................................................................ 8
5-2
N
AME OF EACH PART AND FUNCTION
.......................................................................... 9
5-3
S
URGE INJECTION PHASE
........................................................................................ 11
6. HOW TO CONNECT EQUIPMENT ...................................................................... 12
6-1.
H
OW TO CONNECT EQUIPMENT
................................................................................ 12
6-2.
H
OW TO SET THE TEST CONDITIONS
......................................................................... 13
7. SPECIFICATIONS .................................................................................................. 14
8. STANDARD ACCESSORIES.................................................................................. 15
8-1.
S
TANDARD ACCESSORIES
......................................................................................... 15
9. WARRANTY ............................................................................................................ 17
1 . MAINTENANCE ................................................................................................. 19
11. NOISE LABORATORY SUPPORT NETWORK ................................................. 2
6
Memorandum
7
4. PREFACE
4-1. Preface
We thank you for your purchase of the POWER L NES CDN UN T for LSS-6000
series Model: LSS- NJ6350. This manual contains how to use the LSS- NJ6350
and other important information. n order to obtain the highest performance from
your LSS- NJ6350, thoroughly understand the contents of this manual and use as
ready reference for operation.
Please read the instruction manual of the LSS-6000 series for the details on the
operation of the LSS-6000 series Lightning Surge Simulator..
This Instruction Manual will help operators handle and utilize the
POWER LINES CDN UNIT, LSS-INJ6350 in safety.
Keep this Instruction Manual in a place where it is readily available.
4-2. Funct ons and capab l t es
1. A Coupling/Decoupling Network (abbreviated CDN) unit, used in
conjunction with the LSS-6000 series Lightning Surge Simulator, applies
combination waveform pulses to the power lines of the equipment under
test. The circuit configuration complies with the EC 61000-4-5 standard
prescriptions.
2. The maximum EUT power of this unit is AC500V/50A.
3. Coupling mode can be manually selected.
4. Pulse generation can be synchronized with AC line to this unit.
8
5. APPEARANCE OF THE UNIT AND POSITION OF SERIAL
NUMBER
5-1. Appearance of the un t
PE
INTERLOCK
1 2
L1 L2 L3 N PE
LINE INPUT
AC 500Ｖ／５０Ａ
LINE ON
MAIN POWER
MAIN
AC
INPUT
NOISE LABORATORY CO.,LTD.
MADE IN JAPAN
MODEL
LSS-INJ6350
Ｓ／Ｎ
AC LINE COUPLING DECOUPLING UNIT
CERTIFICATE
査合格証
AC LINE COUPLING DECOUPLING UNIT
POWER
SUBMAIN
LSS-ＩＮＪ６３５０
LINE OUT
PENL3L2L1
L1
S.GND.COMS.HOT.COM
L2 L3 N
SUREG HOT
PENL1 L2 L3
SURGE IN
SURGE GND
DANGER 危険
⑮
⑭
⑪
⑨
⑧ ⑩ ⑫ ⑬
⑦ ⑥⑤
④③
② ①
Dimension: (W) 488×(H) 520×(D)550 mm
Weight: Approx. 90kgs
This manual suits for next models
1
Table of contents
