Nobu Toro User manual
Wall Mounted Air-Conditioning Unit
Επιτοίχια Μονάδα Κλιματισμού
Aer Conditonat model Split de Perete
For correct use of this unit, please read this manual carefully and
keep it for future reference.
Για τη σωστή χρήση της μονάδας, παρακαλούμε διαβάστε
προσεκτικά το εγχειρίδιο και φυλάξτε το για αναφορά στο μέλλον.
Pentru o utilizare corecta, va rugam sa cititi cu atentie acest manual
si sa il pastrati pentru o consultare ulterioara.
English/Ελληνικά/Romana
Wi-Fi MODULE
User’s Manual
Εγχειρίδιο Χρήσης
Manual de utilizare
3
CONTENTS
Introduction to Wi-Fi fuctions 4
Wi-Fi module Installation 5
Download and install the control software 7
Reset AC Wi-Fi module 9
Smartphone, pad or other mobile terminals connect
to Wi-Fi or hotspot 9 Congure the Devices 11
Manage the Devices 12
Others 13
Appendix A: «Cong failed check items» 13
4
Introduction to Wi-Fi Functions
The AC system is equipped with remote control technology, with the
Wi-Fi module inside the machine connected to the display panel and
the command to run the AC transmitted. The AC system is in constant
connection with a wireless router or access point attached to the Internet.
Mobile terminals such as smart phones and tablet computers, on which
special control software are installed and Wi-Fi modules successfully
congured locally, can be used as remote controllers once they are
connected to the Internet.
5
Wi-Fi module installation
Follow these steps to install the Wi-Fi module on the indoor unit:
1 . Open the front panel (see Fig.1)
2. Fix the Wi-Fi module inside the front panel.
a) In the models 9000 & 12000 btu (see Fig. 2):
b) In the models 18000
and 24000 btu the
Wi-Fi module is xed
inside the housing,
so it is necessary to
remove it
(see Fig. 3):
Fig. 1
Fig. 2
Fig. 3
6
Wi-Fi module installation
3. Connect the Wi-Fi module to the air connector that is free (see Fig.4).
a) On models 09 and 12, the air connector is loose outside the electrical box.
b) On models 18 and 24, the air connector is loose inside the electrical box.
CAUTION: Always perform the VM-Fi module installation with the unit removed
from the power supply
4. Close the front panel (see Fig.5).
Fig. 4
Fig. 5
7
Download and install the control software
The control software can be downloaded and installed as follows.
1. For mobile terminals such as smart phones and tablet (Android 4.1 and
iOS 6.0 or above only), search and download ‘AC Freedom’from Google
Play orApp store on and Install It on your system.
2. You may also use your mobile terminal (Android 4.1 and iOS 6.0 or above
only) to scan the‘QR code’ (see Fig.6) with a third party scan tool, which will
automatically direct you to the download interface of AC Freedom for you
to download and install the software.
Once the control software is installed,
enter the “Scanning lnterface” (for
downloading the Welcome Page).
There are two types of log-ons
contained In the Scanning lnterface
(See Fig.7):
Android iOS
Fig. 6
Fig. 7
8
Download and install the control software
Fig. 8
Fig. 9
1. By clicking “scan” and scanning the QR code on the right. (see Fig. 9)
2. By entering the activation code
(6364d) in the area prompted by
“enter activation code” (see Fig. 9)
9
Reset AC Wi-Fi module
Note: The remote control provided in this gure is just one of many models
which is for your reference only. Please rely on the model you have
actually bought, though the operations are the same for all models.
In the case of rst time conguration or after changing the connected
wireless router is, the Wi-Fi module inside the air conditioner needs to
be reset.
• If remote controller with “HEALTH” button, reset the Wi-Fi module
follow method 1;
• If remote controller no “HEALTH” button, reset the Wi-Fi module
follow method 2.
Method 1:
When AC is running, press
“HEALTH” button 8 times,
reset successfully after twice
“beep” sounds. (see Fig. 10)
Fig. 10
press “HEALTH”
button 8 times
10
Reset AC Wi-Fi module
Smartphone, pad or other mobile terminals
connect to WIFI or hotspot
Activate the Wi-Fi function of the mobile terminal and connect it to a
wireless router or an access point.
Note:
A wireless router is required for the Wi-Fi function to work. Please purchase
one if you do not already have one
Note: If the device is not connected successfully, please reset the air
conditioner Wi-Fi in the same way.
Method 2:
When AC is running, press
“COOL” button and “+”
button together for 3s, hear
“beep” sound for 8 times,
then interval 2s and hear
twice “beep” sounds, reset
successfully, (see Fig.11)
Press “COOL”
button and
“+” button
together
for 3s.
Fig. 11
Table of contents
Languages:
