Noahtec WESECUU User manual
Letter Of Thanks
Dear Customer:
Thanks for purchasing security cameras from WESECUU and we really
appreciate your trust.
WESECUU is a factory with more than 500 staffs and stays in security camera
industry for over 10 years. Only with your support, we can stick to our dreams,
and strive to build WESECUU to be a stronger company offering better products
and service.
The highest priority of WESECUU is always our customers. From selecting raw
material to packing products, we carefully test every step.
WESECUU is committed to protect your properties all the time. You can not only
view the local video or playback recorded videos on monitors, but also remotely
view the videos on mobile phone. The intelligent motion detection alert can send
push notifications to your phone so that you can instantly know what happens
around your properties or anywhere you want to monitor.
If you are satisfied with our product, could you please share your purchase
experience on Amazon? Your precious customer review will help us shape our
business to the best and let other customers know more about WESECUU.
Your ongoing support and patronage are our motivation to go further.
On behalf of all colleagues in WESECUU, we sincerely appreciate your support.
Please let us know if there is anything we can do to assist you further.
Thanks again and wish you all the best.
Yours sincerely,
All staffs in WESECUU
For any questions, please contact us:
Toll Free: +1 888 971 6718
Email ID: serviceus@wesecuu.net
Content
Overview ..............................................................................................1
Safety Warning.....................................................................................2
Inspection of Package List....................................................................2
Preparation to setup .............................................................................3
Camera System Setup .........................................................................4
System Setup.......................................................................................7
How to customize record plan ..............................................................8
Customize Schedule Record ................................................................8
How to customize human detection alarm plan ....................................9
How to turn off camera floodlight: .......................................................10
Backup ...............................................................................................13
Remote view on Smart Phone
..........................................................14
Frequently Asked Questions ..............................................................19
Q1: What if one or two cameras show offline?....................................19
Q2: APP offline or Display device not connected................................20
Q3: How can I Restore the system back to factory? ...........................20
Q4: What if I forgot my system login password?.................................21
Q5: Why can’t I record or playback?...................................................22
Q6: After connecting, why nothing show on screen? ..........................23
Q7: What if my USB flash drive can’t be detected by the system?......24
Q8: How does human detection recording work? ...............................24
Q9: Do I need to set the system only record when human detected for
saving hard drive storage? .................................................................24
Q10: How to add a new camera to NVR recorder?.............................24
Q11：Human shape detection didn't work..........................................25
Q12：The mobile phone can’t receive the alarm message.................26
Q13: How to change the camera lighting mode? ................................26
Q14: Can I exchange the provided Ethernet Cable to my own?..........27
Q15: Remote view on PC-client software ...........................................27
Q16: What if I forgot the password of the XMEye Pro APP?................27
1
Overview
Thank you for purchasing our PoE Security Camera System. Please read
this User Manual if having any inquires during installation and operation.
Description about AI Human Alarm Camera with floodlight
AI Human Alarm: Camera can detect human activity. Detection area, time
and trigger action can be customized.
Siren alarm: It will turn on once human movement detected. Siren Sound
can be customized. (Your self-recorded deterrent sound can also be
customized)
IR Night Mode: Camera has built-in IR LEDs and floodlight LEDs. IR LEDs
will automatically switch on for normal night vision when camera
environment gets dark.
Floodlight: It will turn on once human detected at night, and it won’t turn on
at daytime.
Instant app alert: Once an intruder is detected, an alert message will be
sent to your phone.
Human detection recording: Camera will start to record once human are
detected, and switch on the floodlight automatically to offer a colorful video at
night.
Note: PC monitor without speaker can’t delivery sound. Need to connect
an extra speaker with the NVR’s audio output.
2
Safety Warning
We provide one 48V power adapter for PoE NVR box, cameras are
powered over Ethernet cable (PoE). Please do not use NVR’s power cord
to connect camera with power supply, camera will be damaged by the
strong voltage.
Our cameras have IP66 waterproof and dust-proof level. However,
speaker output is located at camera’s bottom, please do not mount
cameras upside down outdoor (speaker side upside), water may get in
through speaker port and damage camera.
Please use waterproof tape on Ethernet cable connection exposed out.
Inspection of Package List
Here is the list for product and relevant accessories. If there is anything
broken or missing, please contact us as soon as possible.
Camera Appearance
1. Standby power supply port. (Do not connect)
2. Network port：Ethernet port for Video and Power input.
Name
Quantity
Name
Quantity
NVR Box
1
Waterproof Lids
4/6/8
IP cameras
4/6/8
Screws
for cameras
4/6/8
Network Cable
1
Power adapters for NVR (52V)
1
USB Mouse
1
User’s Manual
1
3
1, Power supply.
Unnecessary to
connect.
2, Network port
3
Preparation to setup
Before installation, be sure to have following items:
TV/PC monitor (Not laptop or all-in-one computer), 960P or higher resolution
VGA/HDMI cable
Router (WAN)
Hard drive. Hard drive is required for recording. If you purchase the system
without HDD pre-installed, please install one by yourself.
Please make sure the size and configuration: 1 to 4TB HDD can be
supported. Internal, SATA Interface, 3.5/2.5inches.
Notice: This user manual designed for different system model, if your
system has pre-installed hard drive, please skip this step, and check further
steps to install the system.
How to install hard drive into NVR box:
Please power off NVR before installing hard drive.
Loose the top two screws to remote the cover Connect data wire and power wire to hard drive
Connect data wire and power wire to Main Board Screw HDD to the bottom, replace cover
Notice: New Hard Drive need to be formatted before recording. After installation,
on your monitor, please navigate to Main Menu>Advanced>HDD Info,
choose the hard drive, click Format Storage.
4
Camera System Setup
Connect cameras to NVR by provided Ethernet cable.
Connect NVR to power supply by provided 52V power adapter.
NOTICE：DO NOT USE NVR’s ADAPTER FOR CAMERA
Connect provided mouse to NVR box.
Connect NVR to PC Monitor or TV by VGA/ HDMI cable, please kindly noted
that the system doesn’t support on laptop and All- in-One PC for initial Setup.
Connect NVR to the router by provided Ethernet cable, the router must be
WAN (wide area work).
(Image may vary for different model)
Notice：We provide 70ft Ethernet cables for each camera. If needed, you can
replace the Ethernet cable up to 300ft. Normal Cate 5/6 Ethernet cable supported.
We don’t recommend adding on Ethernet cables on original cables by any kind
of Ethernet connector, it may cause video or power lose.
After system initialization, camera’s image will come up one by one in minutes.
If no image comes up, please check FAQ 1 on page19.
Or contact Customer Service for tech support.
5
Installing cameras
Do not attempt to mount your cameras until you are able to view images on
your TV or PC monitor first.
Disconnect all Ethernet cables from cameras after testing.
Punching positioning: put camera base on the wall, locate the positions of
the holes by pencil.
Using electric drill to punch in the marked areas, make sure every hole is deeper
than 30mm.
Knock the plastic rivets into the guide holes and ensure that they are
tightened up
Fixing IP camera: The structure of camera is integrated, please use 3 screws
provided to fix camera on the wall.
Bracket adjustment: loosen according to screws on camera base,
adjust camera’s direction, then, fasten screws.
Please install and adjust camera angle refer to following steps.
6
Precautions for installation angle
Note: Wall, glass or tree will reflect camera’s IR red light at night. So, we don’t
recommend mounting cameras around too many obstacles. It will decrease
night vision video quality and accuracy of human detection a lot.
Other Wrong Installation Scenes
Wrong Installation Scenario:
Cameras are installed closely to the
wall, which reflect light at night with
the IR LEDs.
After adjustment: Getting much
clearer night vision after turn
camera lens towards right.
When camera lens towards tree,
other area hard to see because of
IR light reflection
Object in front of camera lens
and it reflect IR lights
7
System Setup
Change Password: After installing the
system, turn on your NVR and cameras
by the correct power adapter separately,
camera image will show on screen one
by one. Right click your mouse at
monitor, choose Main Menu, for safety
consideration, you’ll be asked to change
password and set security questions
first.
Notice: Please remember the password and security QA, it may take efforts to
reset password if you forgot the password.
Log in: Click Next, you’ll see
password page pop up. Input
your password. Simply click
Log in to access the system.
Set Time: After login,
please navigate to Main
Menu>Date Time, set time
zone and time.
Note: If you forgot password,
please check FAQ4 on page21
Table of contents
