7
modes (such as teletext or SMART mode) are similar to TV
mode and can be used by users as a reference.
3. Ensure a stable and secure power source before turning on
the device.
1. Insert the TV plug into the socket.
2. Turn the [I / O] switch to the [I] posion.
3. Press the [icon] key to turn on the TV.
4. Wait for the TV system to fully boot.
(When the TV is working, by pressing the [power-icon] key,
the TV will enter standby mode.)
The TV will display the welcome menu. Press the [][] keys
to select a language, then press the [] key to select START.
Press the [OK] key to connue. The TV will display an antenna
selecon menu (DVB-T, DVB-C or DVB-S). Press the [][]
buons to select the antenna type, then the [] key to select
the next channel search step [Next] or skip the [Skip] search.
Conrm the selecon with the [OK] key.
If you have selected DVB-T, select the search type in the
search menu by pressing [][]. Press the [] key to switch to
the country of your choice eld. Use the [][][][] keys to
select the desired country, then the [OK] key to conrm the
selecon. Press the [] key to select [Start Scan]. Conrm the
start of the scan by pressing the [OK] key. Please wait unl
your channel search is complete.
When selecng DVB-C, select the type of search in the search
menu by pressing [][ ] (we advise you to select the DTV
opon). Press the [] key to switch to the eld displaying the
country of your choice. Use the [][][][] keys to select the
desired country, then the [OK] key to conrm the selecon.
Press the [] key to select [Start Scan].
Aer conrming the start of the search, select the type of
DVB-C search (Full or Network) by pressing the [][] buons
from the oered selecon. Note: When seng the search type
to [Network], use the [][][][] keys to set the frequency,
network code, modulaon and speed.
Press the [] key to select [Start Scan]. Conrm the start of the
scan by pressing the [OK] key. Please wait unl your channel
search is complete.
In TV mode, press the POWER buon [] to switch to idle
mode.
REMARK:
This device supports energy-saving technology. If there is
no signal in the operang mode, the TV will automacally
switch to sleep mode within ve [5] minutes. Also, by default
this device will enter the standby mode automacally aer 4
hours. (You can turn o this opon in your device sengs)
You can connect dierent devices to your TV and, depending
on the input, you can receive signals of dierent resoluons /
signal quality. Connect your device (DVD player, PlayStaon,
XBOX, PC, etc.) to the appropriate input on your TV. In TV
mode, open the input selecon menu with the [SOURCE] key.
Use the [] [] [] [] keys to select the desired input, then the
[OK] key to conrm the selecon.
REMARK:
In order to achieve the best image quality for each of the
connected devices, we recommend that you make addional
adjustments in the [Sengs] menu and the [Image] menu.
Press the [MENU] key to access the main menu
1. Press the [][] keys to select one of the submenus:
[Parental Control / Sengs / Channel / Sound / Image], press
the [OK] key to conrm the selecon and open the sub menu.
2. Press the [][] buons to select items in the menu / sub-
menu.
3. Press the [][] buons to change the value or seng.
4. Press the [RETURN] key to return to the previous menu or
the [MENU] key to return to the main menu. If you are in the
main menu, press the [MENU] key to exit the menu.
5. Sengs and opons in unavailable menus will be grayed
out.
6. Type of available sub-menu depends on the selected input
(for example, HDMI, DVB-T, etc.).
REMARK:
1. The default menu display me is 15 seconds. Aer 15
seconds of inacvity, the menu will shut down. Menu
shutdown me can be changed in the device sengs.
2. The factory parental control password is 0000.
Before using the TV for the rst me, you have to do a
search channel. Before the channel scan check your antenna
equipment, and ensure that the antenna is properly
connected.
