Niveo Professional NWA220 User manual
Manual Niveo Professional NWA220 Outdoor CPE
User Manual of 11ac 1200Mbps Outdoor CPE
NWA220
NWA
This is the user manual of 11ac 1200Mbps Outdoor CPE, which will approximate guide you how to set and apply the
NWA 220 Outdoor CPE
Manual Niveo Professional NWA220 Outdoor CPE
1st Hardware and Operation mode Instruction
.
WAN: Gigabit WAN Port, connect with ADSL modem or Internet mainly. It will be LAN port under Outdoor CPE and
WiFi Repeater operation mode
Power Supply:
Powered by PoE Switch
The connection diagram shows as P2, Internet cable from PoE Switch to Outdoor CPE’s WAN Port, then PC access
into Outdoor CPE wired/wireless.
Pls note, the outdoor CPE support IEEE 802.3at PoE, the switch should comply with IEEE 802.3at PoE standard.
P2
Connect Outdoor CPE with PC:
User can connect the PC with Outdoor CPE by Wireless SSID and LAN cable:
The diagram of wireless connection showed as follow:
Pls note: the default SSID is WirelessAP2.4G/5.8G, SSID’s
password is 66666666
Manual Niveo Professional NWA220 Outdoor CPE
2nd：Login
Default IP: 192.168.188.253
Username: admin
Password: admin
1）Connect the Outdoor CPE with computer
2）Configure the PC’s local connection IP address as 192.168.188.X (X is number from 2 to 254), subnet mask is
255.255.255.0, follow P4 and P5 to finish.
P4 Setting of computer’s IP address
Manual Niveo Professional NWA220 Outdoor CPE
P 5 Setting of computer’s IP address
3) Input 192.168.188.253 into IE browser, then pop up the login page, the default login user name: Admin,
Passwords: admin, pls do following P6
P6 Login
Manual Niveo Professional NWA220 Outdoor CPE
3rd : WEB GUI interface Setting:
1) Status
After login, then P7 Device Status will be showed:
P7: Device Status
In this Outdoor CPE, the default operation mode is AP mode.
Then in 2.4G Wireless Setting, GUI configuration page showed as below:
User can configure the SSID, password, band width, channel here, thenApply to finish.
Manual Niveo Professional NWA220 Outdoor CPE
P8. 2.4G Wireless setting
5.8G Wireless Setting GUI configuration setting showed as P8:
P9 5.8G Wireless Setting
Manual Niveo Professional NWA220 Outdoor CPE
LAN Setting to configure the DHCP or Fix IP
P10 LAN Setting
AP location setting: can mark where the AP set up, and AP name as P11:
P11 AP Position setting
Manual Niveo Professional NWA220 Outdoor CPE
2) Wizard Configuration:
Click Wizard in Status page, will pop up following page to configure the operation mode:
There are four operation mode of this ceiling Outdoor CPE, and there are explanation for each operation mode for
better application.
P12 Operation mode
1. Gateway Mode:
Click Gateway mode, will pop up following pictures:
Pls choose the right WAN setting mode, then click next to continue.
Manual Niveo Professional NWA220 Outdoor CPE
P13. WAN setting in Gateway Mode
P14 Wireless Setting in Gateway Mode
When click Next, then will complete the Gateway mode setting and show following picture:
Manual Niveo Professional NWA220 Outdoor CPE
P15 Complete the setting in Gateway Mode
When return to Status, the page showed as follow:
P16 Status in Gateway Mode
2. WiFi Repeater mode
Click WiFi Repeater operation mode in Wizard, then following page will pop up, and choose the right SSID to bridge,
Other manuals for NWA220
2
Other Niveo Professional Wireless Access Point manuals
