3
Loose clothes, jewelry or long hair can be caught in moving parts which is obviously dangerous.
g) If devices are installed and collection facilities, ensure that they are connected and properly used.
Use of dust collection can reduce the hazards caused by dust.
f) If the use of the tool in a damp environment is unavoidable, use a residual current device.
The application of a residual current protective device reduces the risk of electric shock.
4) Warning and operating of the drywall sander
a) Do not install. Use your work for the correct power tool.
With the right power tool will do the job better and safer at the rate range.
b) Do not use the power tool if the switch is damaged.
A power tool that can no longer be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the socket and / or remove the battery before making any adjustments,
changing accessories, or storing power tools.
This precaution prevents the inadvertent startup of the power tool.
d) Store idle power tools out of reach of children. Don’t let people use the device which is not familiar
with this drywall sander tool or have not read the instructions manual yet.
Power tools are dangerous if they are used by inexperienced people.
e) Maintain the power tool with care. Make sure of moving parts work properly and binding of moving
parts are broken or damaged so that the function of the power tool is compromised. You can repair
damaged parts before operating the unit.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean.
Properly maintained cutting tools with sharp cutting edges are less and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these instructions. Take into
account the working conditions and work being performed. The use of power tools other than those
intended could result in dangerous situations.
5) Service
a) Have your power tool repaired only by qualified personnel using original spare parts. This ensures
that the device remains safe.
Additional safety
WARNING! Read all warnings and instructions to reduce the risk of injury.
WARNING! The tool can arise when working with the dust be harmful:
• Apply for grinding Always wear goggles and a dust mask.
• No asbestos-containing materials process. Asbestos is considered carcinogenic.
•Be especially careful when sanding lead-containing materials:
- All persons who work with the device or entering the workplace, have a special mask to protect
against lead paint and vapor wear.
- Children and pregnant women may not enter the workplace.
- In the workplace, not eat, drink or smoke.
• Contact with or inhalation of sanding dust (eg of lead-based paints)
the operator and may lead to other health problems present. Always wear appropriate personal
protective equipment, eg a dust mask when sanding and use the dust bag.
•The power cord away forever from the moving parts of the device.
• Wear safety glasses, especially when sanding overhead.
ELECTRICAL SAFETY
•Set the power source must match the specifications on the nameplate.
•If the power supply cord is damaged, it must be replaced by the manufacturer or its service agent or
similarly qualified person in order to avoid hazards.
•After replacing a cord or plug, must be the old cable or old plugs are immediately discarded. The
insertion of a loose cable into the AC outlet is dangerous.
•Use only approved extension cords that are appropriate for the power consumption of the device. The
ladder must have a square cross-section of at least 1.5 mm. Be dealt with by using a cable drum, the
cable must always whole.
• Do not wrap the cable and avoid physical contact with the cable.
