Nikon Z50 User manual

Other manuals for Z50

2

Table of contents

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions

Samsung

Samsung SCC-C4253 user manual

1

SB2J02(11)

6MOA9911-02

En Features Available with “C” Firmware Version 2.30

Updating the Z 50 “C” rmware from version 2.20 to version 2.30 gives

access to the features described below. For information on features

available with prior updates, see the Z 50 Reference Manual.

To view the camera rmware version or update the camera rmware,

select Firmware version in the setup menu. The latest rmware for

the Z50 is available for download from the Nikon Download Center.

https://downloadcenter.nikonimglib.com/

2

New Options for Custom Settings f2 “Custom ControlsNew Options for Custom Settings f2 “Custom Controls

(Shooting)”: “Save Focus Position” and “Recall Focus Position”(Shooting)”: “Save Focus Position” and “Recall Focus Position”

Save focus position and Recall focus position have been added to

the roles that can be assigned to camera controls using Custom Set-

ting f2 (Custom controls (shooting)). You can save the current focus

position by assigning Save focus position to Lens Fn button and then

pressing and holding the lens Fn button. The saved position can be in-

stantly restored by assigning Recall focus position to Lens Fn2 but-

ton and pressing the lens Fn2 button (“memory recall”). You may nd

this useful if you frequently return to subjects at a xed focus distance.

• Memory recall is available only when an autofocus Z mount lens

equipped with Fn and Fn2 buttons is mounted on the camera. If the

lens is not equipped with an Fn2 button, the camera cannot save the

focus position even if the Save focus position is assigned to the lens

Fn button.

• Focus positions can be saved and recalled in both photo and video

modes.

• Focus positions can be saved in any focus mode.

• The stored focus position is reset when the lens is detached.

3

Memory RecallMemory Recall

1 Select Save focus position for Custom

Setting f2 (Custom controls (Shooting))

> Lens Fn button.

2 Select Recall focus position for Custom

Setting f2 (Custom controls (Shooting))

> Lens Fn2 button.

3 Focus on the desired subject in the shoot-

ing display and press and hold the lens Fn

button.

If the operation is successful, an icon will

appear in the shooting display to indicate

that the focus position has been saved.

4 Press the lens Fn2 button.

• The saved focus position will be restored.

• Holding the lens Fn2 button activates

manual focus, and the camera will not

refocus if the shutter-release button

is pressed halfway while the control is

pressed.

4

©2022 Nikon Corporation

D Cautions: Memory Recall

• Focus positions cannot be saved while shooting information is dis-

played.

• Changes in ambient temperature may result in focus being recalled

to a position dierent from that at which it was saved.

• Previously-saved focus positions tend to change if recalled after

lens focal length is adjusted via zoom. If a saved focus position is re-

called after the lens focal length is adjusted, the camera will sound

four short beeps, provided that an option other than O is selected

for Beep options > Beep on/o in the setup menu.

A Beep

• If an option other than O is selected for Beep options > Beep on/

o in the setup menu, the camera will sound two short beeps when

a focus position is saved or recalled in photo mode.

• A beep does not sound in silent photography, video mode or when

O is selected for Beep options > Beep on/o.