Nikon D300 User manual

Upgrading the Firmware for the D300

Upgrading the Firmware for the

D300

Windows 

Thank you for choosing a Nikon product. This guide describes how to

upgrade the camera firmware for the D300.

If you are not confident that you can perform the update

successfully, the update can be performed by a Nikon-authorized

service representative.

The D300 has two sets of firmware, A and B, which must be updated separately. After

updating the A firmware, repeat steps 4–5, below, to upgrade the B firmware.

Important

The camera may be damaged if power is interrupted or camera controls are operated during the

update. Do not turn the camera off, remove or disconnect the power source, or operate camera

controls during the update. If the update is not completed successfully and the camera becomes

inoperable, take the camera to a Nikon-authorized service representative for inspection.

Get ready

To upgrade the camera firmware, you will need:

The camera

A UC-E4 USB cable or a memory card reader

One of the following power sources:

An EH-5/EH-5a AC adapter

A fully-charged EN-EL3e rechargeable Li-ion battery

A Nikon-approved memory card that has been formatted in the camera (note that

all data on the memory card will be deleted when the card is formatted; before

formatting the card, back up any data you wish to keep to a computer or other

device).

file:///K|/En/En/d300ab_win_en_ABF.html (1 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

The camera

User's Manual

Check the current camera firmware version

Turn the camera on.

Press the MENU

button and select

Firmware version

in the setup menu.

Two firmware versions (A and B) will be

displayed. Both should be earlier than 1.03.

Press OK and turn the camera off.

Download and extract the new firmware

Right-click an empty area of the desktop and select New > Folder from the menu

that appears. Name the folder as desired.

file:///K|/En/En/d300ab_win_en_ABF.html (2 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

Right-click the I agree - Begin download link on the download site and select

Save Target As. Save the file to the folder created in Step 3-1.

Open the folder created in Step 3-1 and

double-click F-D300-V110W.exe.

The following files will be extracted to a “D300Update”folder in the new folder:

A3000110.bin Camera A firmware

B3000110.bin Camera B firmware

“D300Update”folder

file:///K|/En/En/d300ab_win_en_ABF.html (3 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

Copy the firmware to the memory card

The firmware can be copied to the camera memory card either by connecting the

computer directly to the camera using the USB cable, or by removing the memory card

from the camera and inserting it in a card reader.

Important

Only one of the two sets of firmware (A or B) can be updated at a time. Use separate

memory cards for each set of firmware, or update firmware A as described below, then

format the memory card and repeat the process for firmware B.

Direct USB Connection

Note: Use the EH-5/EH-5a AC adapter or a fully-charged EN-EL3e rechargeable Li-ion

battery.

Turn the camera off and insert a formatted memory card. For information on

formatting memory cards, see the camera

User's

Manual

After turning the camera on, press the MENU

button, select the setup menu, and set the

USB option to Mass Storage.

Turn the camera off and connect the USB cable as shown below.

file:///K|/En/En/d300ab_win_en_ABF.html (4 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

UC-E4 USB cable

Turn the camera on.

If Nikon Transfer is installed, it will start automatically; to exit, select Exit from

the File menu.

Windows Vista

Under Windows Vista, an AutoPlay dialog

may be displayed. Click .

Windows XP

Under Windows XP, a Removable Disk

dialog may be displayed. Click Cancel.

file:///K|/En/En/d300ab_win_en_ABF.html (5 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

The camera will appear in “Computer”(Windows Vista) or “My

Computer”(Windows XP) as a removable disk. Copy “A3000110.bin”(A

firmware) or “B3000110.bin”(B firmware) from the “D300Update”folder to this

removable disk.

Drive letters may differ Illustration shows A firmware

When copying is complete, double-click the removable disk and confirm that

the file has been copied successfully.

Disconnect the camera from the computer.

For more information, see the camera

User's

Manual

Important

Be sure to copy the firmware to the root directory of the memory card. The camera will

not recognize the new firmware if it is placed in a folder under the root directory.

Card Reader

Connect the card reader to the computer and insert a formatted memory card.

If Nikon Transfer is installed, it will start automatically; to exit, select Exit from

the File menu.

file:///K|/En/En/d300ab_win_en_ABF.html (6 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

Windows Vista

Under Windows Vista, an AutoPlay dialog

may be displayed. Click .

Windows XP

Under Windows XP, a Removable Disk

dialog may be displayed. Click Cancel.

The memory card will appear in “Computer”(Windows Vista) or “My

Computer”(Windows XP) as a removable disk. Copy the firmware to the

removable disk as described in Step5 of “Direct USB Connection.”

Right click the removable disk and select Eject from the menu that appears.

Remove the memory card from the card reader.

Important

Be sure to copy the firmware to the root directory of the memory card. The camera will

not recognize the new firmware if it is placed in a folder under the root directory.

Update the camera firmware

file:///K|/En/En/d300ab_win_en_ABF.html (7 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

During the update, do not:

Remove the memory card

Turn the camera off

Operate any of the camera controls

Attach or remove lenses

Unplug or disconnect the AC adapter

Remove the battery

Subject the camera to powerful electromagnetic noise

Any of the above actions could cause the camera to become inoperable.

Insert the memory card containing the firmware into the camera.

Turn the camera on.

Press the MENU

button and select

Firmware version

in the setup menu.

The current firmware version will be

displayed. Highlight Update and press the

multi selector to the right.

A firmware update dialog will be displayed. Highlight Yes and press OK to

begin the update.

file:///K|/En/En/d300ab_win_en_ABF.html (8 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

*Illustration shows

dialog displayed

when A firmware

is updated. Follow

the same steps to

update B firmware.

The update may take anywhere from two to

five minutes. Do not perform any operations

while the messages shown at right are

displayed.

The message shown at right will be displayed

when the update is complete.

Confirm that the update was completed successfully.

7-1.Turn the camera off and remove the memory card.

7-2.Check the camera firmware version as described in Step2, “Check the

current camera firmware version.”

7-3.If the version displayed is 1.10, the

update was successful.

*Illustration shows dialog displayed when

updates for both A firmware and B

firmware are completed.

file:///K|/En/En/d300ab_win_en_ABF.html (9 of 10) [6/18/2010 3:43:17 PM]

Upgrading the Firmware for the D300

Format the memory card.

If you changed the USB setting from MTP/PTP to Mass Storage to update

the camera firmware, return to the USB menu and select MTP/PTP.

This completes the firmware update.

file:///K|/En/En/d300ab_win_en_ABF.html (10 of 10) [6/18/2010 3:43:17 PM]

Other manuals for D300

Table of contents

Popular Digital Camera manuals by other brands

Mercury

Mercury 350K user manual

Pentax

Pentax Optio LS 465 operating manual

Sanyo

Sanyo VPC-S1085 instruction manual

GE SMART A1255 user manual

Point Grey

Point Grey Gazelle Getting started

Pentax

Pentax P-5 manual

BlazeVideo

BlazeVideo A280 instruction manual

Sony

Sony MCA-20 manual

Sony

Sony Alpha DSLR-A290 instruction manual

ATIK Cameras

ATIK Cameras One user manual

CohuHD Costar

CohuHD Costar 3930 Series Installation and operation manual

Leica

Leica M10-R quick start guide

FujiFilm

FujiFilm FinePix A700 owner's manual

Lorex

Lorex LNZ81P25 Series quick start guide

GE J1470S user manual

Sony

Sony A6700 Startup guide

Canon

Canon EOS ELAN7 instructions

Samsung

Samsung SCC-C4253 user manual